• Korean Journal of Ecology and Environment
• /
• v.51 no.1
• /
• pp.71-85
• /
• 2018

A recent topic of interest within ecology is ecosystem services that are importantly connected with biodiversity. Biodiversity is a fundamental component of ecological studies and has been the subject of many studies worldwide. However, studies on the diversity and distribution of freshwater fish were not undertaken in earnest until 2000, and the number of internationally available studies is therefore still limited. In this study, we used data from "The Survey and Evaluation of Aquatic Ecosystem Health (hereafter SEAEH)" within the framework of which whole water systems on the Korean peninsula are annually monitored to investigate and determine the current status of the diversity and distribution of freshwater fish, as well as to elucidate major factors impacting freshwater fish. A total of 130 species from 28 families were identified at around 953 sites in the SEAEH investigation of 2014. The species Zacco platypus (relative abundance: 28.2%) and Z. koreanus (19.3%) were identified as the most abundant species on the Korean peninsula, and besides these 20 endangered species, 51 endemic species and 4 exotic species were also collected. Highest (96 species) and lowest (72 species) diversity were identified in the Han River Watershed and the Yeongsan/Seomjin River Watershed, respectively. The mean endemic rate was 32.7%, which is higher than the previous rate determined in 1995. The exotic species Micropterus salmoides, Lepomis macrochirus and Carassius cuvieri were found in the whole river system except north Yeongdong, whereas Oreochromis niloticus occurred only at three sites due to the cold water temperatures in winter. Totally, 28 species were found to be translocated to different water systems not connected with known original habitats, most translocations occurring in the Nakdong River and the Yeongdong region. Among the translocated species, Opsariichthys uncirostris amurensis, and Erythroculter erythropterus were dominantly distributed in the mid- to lower reaches of Nakdong River where they may be harmful to the native fish assemblages due to their strong predation. The construction of weirs in connection with the "4 River Project" generated changes in fish assemblages before, during and after the project, resulting in altered habitat condition. Especially, a decrease in the number of endemic species and an increase in the abundance of lentic species were seen. Human-induced global warming will allow exotic species requiring high water temperatures to adapt to the environmental conditions of the Korean peninsula, which may enhance the diversity of native fishes and create changes in distribution. For the establishment of realistic and efficient management and protection strategies for Korean freshwater fish, SEAEH, which produces fundamental and quantitative data for Korean streams, is an important and necessary tool.

• Journal of Wetlands Research
• /
• v.19 no.3
• /
• pp.345-352
• /
• 2017

The average global temperature on Earth has increased by about $0.85^{\circ}C$ since 1880 due to the global warming. The temperature increase affects hydrologic phenomenon and so the world has been suffered from natural disasters such as floods and droughts. Therefore, especially, in the aspect of water deficit, we may require the accurate prediction of water demand considering the uncertainty of climate in order to establish water resources planning and to ensure safe water supply for the future. To do this, the study evaluated future water balance and water deficit under the climate change for Anseong river basin in Korea. The future rainfall was simulated using RCP 8.5 climate change scenario and the runoff was estimated through the SLURP model which is a semi-distributed rainfall-runoff model for the basin. Scenario and network for the water balance analysis in sub-basins of Anseong river basin were established through K-WEAP model. And the water demand for the future was estimated by the linear regression equation using amounts of water uses(domestic water use, industrial water use, and agricultural water use) calculated by historical data (1965 to 2011). As the result of water balance analysis, we confirmed that the domestic and industrial water uses will be increased in the future because of population growth, rapid urbanization, and climate change due to global warming. However, the agricultural water use will be gradually decreased. Totally, we had shown that the water deficit problem will be critical in the future in Anseong river basin. Therefore, as the case study, we suggested two alternatives of pumping station construction and restriction of water use for solving the water deficit problem in the basin.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.57-69
• /
• 2014

As of 2013, Korean population density is 505 persons per $1km^2$ and is ranked 3rd place in the most densely populated countries exception of city-states. It shows clearly the population is concentrated in the city area. To fulfil this urban concentration population demand, the enlargement and complexation of buildings, subway and other underground spaces connection tendency has been intensified, and it is need to construct the indoor spatial information DB as well as the accurate indoor surveying DB to promote people's safety and social welfare. In this study, Sadang station and Incheon National Airport were aimed for the construction of Wi-Fi AP location DB and RadioMap DB by collecting the indoor AP raw datas by using mobile device and those collected results were ran through the process of verification, supplementation, and analyzation. To evaluate the performance of constructed DB, 10 points in Incheon Airport- 3rd flr in block A, and 9 points in Sadang station-B1 were selected and calculated the estimated points and ran evaluation experiment using survey positioning error, which is distance between real position and the estimated position. The result shows that Incheon international airport's average and standard deviation was separately 17.81m, 17.79m and Sadang station's average and standard deviation was separately 22.64m, 23.74m. In Sadang station's case, the areas near the exit has low performance of surveying position due to fewer visible AP points than other areas. As total datas were examined except those position, it was verified that the user's location was mapping close position in surveying positioning by using constructed DB. It means that constructed DB contains correct Wi-Fi AP locations and radio wave patterns in object region, so it is considered that the indoor spatial information service based on constructed DB would be available.

• Journal of The Korean Association For Science Education
• /
• v.33 no.7
• /
• pp.1431-1449
• /
• 2013

This study is based on the assertion that science museums should consider visitors' views and expectations as they are not satisfied in many cases. In this study, we investigated 31 scientifically gifted students and 177 science high school students about their image of science museums. Using the questionnaire, it was found that only 51% of students visited science museums; however, the average number of visits was 4.2. This means that students tended to re-visit after the first visit of the science museum. Students had a 'good' image of science museums when they incurred hands-on experiences and observed new, interesting, curious and funny exhibits. And students had a 'bad' image of science museums due to the following aspects: lack of new and interesting exhibits, information and guide, diverse contents, and hands-on experience; deficiencies in environment; and inadequacy of the management, operation and composition of exhibits. Therefore, they hoped that science museums will provide more hands-on experiences and experiments, new and interesting exhibits, systematic management and composition of exhibits, information and guides, and a good environment. So science museums need to pay special attention to aspects like management, information guides and environment for the first-time visitors. Based on the above results, we suggested "Directions for a good science museum based on students' views". While asking students what topics they wanted to know and learn in a science museum, each student was given the choice of four topics; eventually, 2.9 answers overlapped for each topic. When classifying students' topics into four main themes for the Gwangju National Science Museum, the order from the most popular theme to the least one was 'science in everyday life', 'ocean/space/future science', 'light and science', and 'culture, art and science'. Among the topics mentioned by students, only 37% are exhibited in Seoul, Gwacheon, Daejeon, or Gwangju science museums. We hope that the results and research methods will be used for evaluation, re-construction, and reinvigorated presentation of science museums.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.12
• /
• pp.664-671
• /
• 2017

Non-point source pollution is the emission source that unspecifically releases pollutants to water system from unspecific places such as cities, agricultural lands, mountains, and construction sites and its discharge path is not easily identified. Also, it is difficult to design and manage the reduction facilities for the emission quantity is primarily affected from weather conditions like rainfall. Since 2006, the significance of non-point source pollution reduction has been grown in Republic of Korea and this reinforces needs for the installation of reduction facilities. However, because the standards for the installation details and reduction efficiency are not clarified by law, people are preferring technologies that do not require particular maintenance and high expenses. The purpose of this study is to examine and maintain the efficiency of non-point source pollutants reduction facility which uses expended polypropylene as a media. The higher the depth of the media, the less range of variations in the reduction efficiency was observed and the final efficiency was also increased. When the media depth was 60 cm, the average reduction efficiency was 94% and 90% where linear velocities were 10 m/hr and 20 m/hr respectively. The results from 180 minutes operation in 10 m/hr and 20 m/hr of linear velocities were slightly different in head loss changes which were caused by media depth variations. The backwash experiments which were conducted in triplicate showed the reduction efficiency decreased as the time went on because of the media clogging. However, it was found that after the backwashing the reduction efficiency was increased as effective as the efficiency of the initial filtration.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.52-63
• /
• 2009

Recently in Korea, in the case of metropolis, the urban signalized intersections are controlled by traffic information center or ITS center. Cheon-an City also established traffic information center through the 1st.-$\sim$3rd. ITS public construction and has managed this center that includes bus information service, traffic information collection and providing service, parking information service, and traffic responsive control system. In the Cheon-an metropolitan traffic signal operation, traffic signal controllers were grouped by the each main traffic flow axes and performed with coordinated signal timing for the signalized arterials, and also cycle and split changed by realtime traffic demands. Cheon-an urban traffic responsive control system was evaluated by intersection delay and speed, then it was verified that the delay decreased and vehicle speed improved. However, the rural signal control system to connect adjacency town was evaluated to have lower status than urban area due to the unimproved TOD (Time of day) plan. Therefore actuated signal control was examined for substitutive control system in isolated signal intersection. The aim of this article is to compare actuated signal control with TOD mode in the rural intersection of Cheon-an and to fine superiority of these two control mode, with evaluation of vehicle delay by using HCM(2000) method and by micro-simulation CORSlM. The result of field test show that actuated signal control gave better performance in delay comparison than the existing TOD signal control. And simulation outcome verified that non-optimized TOD has higher delay than optimized TOD mode, non-optimal actuated mode, and optimal actuated signal control mode. Particularly, these three modes delays had not different values according to the paired sample t-test. This is because small traffic demands were loaded in each links. This suggested actuated signal control is expected to be more effective than TOD mode in some rural isolated intersections which frequently need to survey for traffic volume.

• Journal of Arbitration Studies
• /
• v.28 no.2
• /
• pp.3-43
• /
• 2018

The emergence of a multi-door courthouse is related with a couple of reasons as follows: First, a multi-door courthouse was originally initiated by the United States government that increasingly became impatient with the pace and cost of protracted litigation clogging the courts. Second, dockets of courts are overcrowded with legal suits, making it difficult for judges to handle those legal suits in time and causing delays in responding to citizens' complaints. Third, litigation is not suitable for the disputant that has an ongoing relationship with the other party. In this case, even if winning is achieved in the short run, it may not be all that was hoped for in the long run. Fourth, international organizations such as the World Bank, UNDP, and Asia Development Bank urge to provide an increased access to women, residents, and the poor in local communities. The generic model of a multi-door courthouse consists of three stages: The first stage includes a center offering intake services, along with an array of dispute resolution services under one roof. At the second stage, the screening unit at the center would diagnose citizen disputes, then refer the disputants to the appropriate door for handling the case. At the third stage, the multi-door courthouse provides diverse kinds of dispute resolution programs such as mediation, arbitration, mediation-arbitration (med-arb), litigation, and early neutral evaluation. This study suggests the extended model of multi-door courthouse comprised of five layers: intake process, diagnosis and door-selection process, neutral-selection process, implementation process of dispute resolution, and process of training and education. One of the major characteristics of extended multi-door courthouse model is the detailed specification of individual department corresponding to each process within a multi-door courthouse. The intake department takes care of the intake process. The screening department plays the role of screening disputes, diagnosing the nature of disputes, and determining a suitable door to handle disputes. The human resources department manages experts through the construction and management of the data base of mediators, arbitrators, and judges. The administration bureau manages the implementation of each process of dispute resolution. The education and training department builds long-term planning to procure neutrals and experts dealing with various kinds of disputes within a multi-door courthouse. For this purpose, it is necessary to establish networks among courts, law schools, and associations of scholars in order to facilitate the supply of manpower in ADR neutrals, as well as judges in the long run. This study also provides six case studies of multi-door courthouses across continents in order to grasp the worldwide picture and wide spread phenomena of multi-door courthouse. For this purpose, the United States and Latin American countries including Argentina and Brazil, Middle Eastern countries, and Southeast Asian countries (such as Malaysia and Myanmar), Australia, and Nigeria were chosen. It was found that three kinds of patterns are discernible during the evolution of a multi-door courthouse model. First, the federal courts of the United States, land and environment court in Australia, and Lagos multi-door courthouse in Nigeria may maintain the prototype of a multi-door courthouse model. Second, the judicial systems in Latin American countries tend to show heterogenous patterns in terms of the adaptation of a multi-door courthouse model to their own environments. Some court systems of Latin American countries including those of Argentina and Brazil resemble the generic model of a multi-door courthouse, while other countries show their distinctive pattern of judicial system and ADR systems. Third, it was found that legal pluralism is prevalent in Middle Eastern countries and Southeast Asian countries. For example, Middle Eastern countries such as Saudi Arabia have developed various kinds of dispute resolution methods, such as sulh (mediation), tahkim (arbitration), and med-arb for many centuries, since they have been situated at the state of tribe or clan instead of nation. Accordingly, they have no unified code within the territory. In case of Southeast Asian countries such as Myanmar and Malaysia, they have preserved a strong tradition of customary laws such as Dhammthat in Burma, and Shriah and the Islamic law in Malaysia for a long time. On the other hand, they incorporated a common law system into a secular judicial system in Myanmar and Malaysia during the colonial period. Finally, this article proposes a couple of factors to strengthen or weaken a multi-door courthouse model. The first factor to strengthen a multi-door courthouse model is the maintenance of flexibility and core value of alternative dispute resolution. We also find that fund raising is important to build and maintain the multi-door courthouse model, reflecting the fact that there has been a competition surrounding the allocation of funds within the judicial system.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.3
• /
• pp.15-22
• /
• 2010

Today's rapid shifts toward a new paradigm are combining city spaces with reality and technology, which is known as a ubiquitous environment. An ubiquitous environment means that 'whenever' and 'wherever' become connected. It is a great possibility that this will change our future lifestyle. Korea has the biggest advantage in the implementation of this new environment, such as having an excellent network infrastructure. Using these attributes of a ubiquitous environment, changes are being made toward ubiquitous cities within developing fields of construction, landscaping, streets, art, and the environment. This research is based on background of research that activated media pole in public city space has been done research about reality of digital skill, fusion, and sense of ubitizen, and Kang-Nam U-street applied by ubiquitous technique. While reflecting an environment that can be utilized in a modern digital society, the application of ubiquitous technology to media pole can be a space for the two-way communication of the current paradigm. It would also be meaningful to create a new cultural space through media pole. Through evaluation, citizens of the ubiquitous age are going to interact to raise the satisfaction that media pole in city space can prevent giving direction to develop and trial and error about service ability, identity, and publicity. Finally, the media pole can be used as a fundamental element to suggest directions for change when viewed as future development.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.12
• /
• pp.1098-1125
• /
• 2000

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 1998 and 1999 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. 1) A review of the recent studies on fluid flow, turbomachinery and pipe-network shows that many experimental investigations are conducted in applications of impingement jets. Researches on turbulent flows, pipe flows, pipe-networks are focused on analyses of practical systems and prediction of system performance. The results of noise reduction in the turbomachinery are also reported. 2) A review of the recent studies on heat transfer analysis and heat exchanger shows that there were many papers on the channel flow with the application to the design of heat exchanger in the heat transfer analysis. Various experimental and numerical papers on heat exchanger were also published, however, there were few papers available for the analysis of whole system including heat exchanger. 3) A review of the recent studies on heat pump system have focused on the multi-type system and the heat pump cycle to utilize treated sewage as the heat source. The defrosting and the frosting behaviors in the fin-tube heat exchanger is experimentally examined by several authors. Several papers on the ice storage cooling system are presented to show the dynamic simulation program and optimal operation conditions. The study on the micro heat pipes for the cooling of high power electronic components is carried out to examine the characteristics of heat and mass transfer processed. In addition to these, new type of separate thermosyphon is studied experimentally. 4) The recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. New systems operating with natural refrigerants are drawing lots of attention. In addition to these, evaporation and condensation heat transfer characteristics of traditional and new refrigerants are investigated for plain tubes and also for microfin tubes. Capillary tubes and orifice are main topics of research as expansion devices and studies on thermophysical properties of new refrigerants and refrigerant/oil mixtures are widely carried out. 5) A review of the recent studies on absorption cooling system shows that numerous experimental and analytical studies on the improvement of absorber performance have been presented. Dynamic analysis of compressor have been performed to understand its vibration characteristics. However research works on tow-phase flow and heat transfer, which could be encountered in the refrigeration system and various phase-change heat exchanger, were seemed to be insufficient. 6) A review of recent studies on duct system shows that the methods for circuit analysis, and flow balancing have been presented. Researches on ventilation are focused on the measurement of ventilation efficiency, and variation of ventilation efficiency with ventilation methods by numerous experimental and numerical studies. Furthermore, many studies have been conducted in real building in order to estimate indoor thermal environments. Many research works to get some information for cooling tower design have been performed but are insufficient. 7) A review on the recent studies on architectural thermal environment and building mechanical systems design shows that thermal comfort analysis is sitting environment, thermal performance analysis of Korean traditional building structures., and evaluation of building environmental load have been performed. However research works to improve the performance of mechanical system design and construction technology were seemed to be insufficient.

• Journal of The Korean Association For Science Education
• /
• v.37 no.5
• /
• pp.859-877
• /
• 2017

The purpose of this study is to probe secondary science teachers' perception on scientific models and modeling. A total of 50 experienced science teachers were surveyed with 10 open-ended questions about several aspects of models and modeling: definition, examples, purpose, multiplicity, changeability, design/construction, evaluation and beliefs in the use of models and modeling as a teaching tool. The analysis of the data shows the following results: 1) understanding of models and modeling held by a majority of experienced secondary science teachers was far from that of experts as they concentrated on a model's superficial, representative, and visual functions, 2) when it comes to their view toward the use of a model, a model does not remain in the stage of 'doing science' but in the stage of being a subsidiary teaching tool for the teacher's explaining and the students' understanding of scientific concepts, 3) the subjects they majored in made meaningful differences in their contextual understanding of models and modeling, 4) though most of the teachers acknowledged the importance of teaching about models and modeling, even a lot of them showed a negative position toward the opinion that they are willing to apply modeling to their classes. Implications of the results were discussed in terms of intervention in order to enhance secondary science teachers' understanding and pedagogical content knowledge of models and modeling.