• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.169-170
• /
• 2020

Occupational Safety and Health Management Cost, used to protect workers in Korean construction worksites and to create safe working environments, is a legally managed expense item. As this cost item is grounded on the Occupational Safety and Health Act, it is always implemented. However, because there is a ceiling on its rates, insufficient amounts of Safety Management Costs are often allocated to worksites, with the money not being used to areas essential to worker safety. As such, the current study raises the need to develop a set of standards to enable some items under the Occupational Safety and Health Management Costs-appropriated under the rate of indirect costs-to be appropriated as direct construction costs. As a preliminary step in this effort, the current study will provide basic data that can be used to create construction cost calculation standards for items that can be calculated as direct construction costs.

• 한국안전학회지
• /
• 제37권3호
• /
• pp.34-44
• /
• 2022

This study analyzed the smart construction safety cost included in safety management plans that are approved before construction. Specifically, it refers to the cost incurred in constructing and operating a safety management system using wireless communication and facilities. Based on the obtained statistical results, an activation policy for the inclusion of the smart construction safety cost in building safety management plans was proposed. The smart construction safety cost must be included in the safety management cost; notably, this is mandated by the Construction Technology Promotion Act. However, there are some problems with the inclusion of smart construction safety costs. To analyze the problems encountered when calculating the smart construction safety cost and including it in safety management plans, in this study, statistical analysis was performed using the data of 1,334 safety management plans received at the Construction Safety Management Integrated Information (CSI) from June to August 2021. The results show that only 50.7% of the safety management plans included the smart construction safety cost although the current law mandates 100% inclusion of these costs. Thus, it is apparent that the smart construction safety costs are only included in a low proportion of sites. In addition, the calculated smart construction safety costs were shown to have a small correlation with the construction cost; moreover, they appeared to be distributed at a constant cost level. In this context, it is believed that perfunctory cost calculations were performed at most sites since the effect of the construction cost on the smart construction safety cost was negligible. Therefore, it is necessary to improve the inclusion of smart construction safety costs by strengthening the authorization process of the approval institute of safety management plans. In addition, institutional support, such as guidelines that promote the calculation and inclusion of appropriate smart construction safety costs according to the characteristics of sites, are needed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.87-88
• /
• 2016

In order to assess the design value of engineering work from the point of view of LCC (Life Cycle Cost) in Korea, it is mandatory for all construction works that the total construction costs are over 10 billion won. The LCC includes initial construction costs, maintenance & operation costs, energy costs, end-of-life costs, and so on. Among these, the portion for maintenance & operation costs for a building is sizeable, as compared to the initial construction costs. Furthermore, the paradigm for construction industry has rapidly shifted from 2D to BIM, which includes design planning and data management. However, the study of BIM-based LCC analysis is not adequate today, even though all domestic construction projects ordered by the Public Procurement Service have to adopt BIM. Therefore, this study suggests a methodology of BIM-based LCC analysis that is particularly focused on repair and replacement (R&R) cost. For this purpose, we defined requirements of calculating R&R cost and extracted X from the relevant IFC data. Thereafter, we input them to the ontology of calculating the initial construction costs to obtain an objective output. Finally, in order to automatically calculate R&R cost, mapping with R&R criteria was performed. We expect that our methodology will contribute to more efficiently calculate R&R cost and, furthermore, that this methodology will be applicable to all range of total LCC. Thus, the proposed process of automatic BIM-based LCC analysis will contribute to making LCC analysis more fast and accurate than it is at present.

• 한국건설관리학회논문집
• /
• 제11권1호
• /
• pp.142-150
• /
• 2010

본 연구는 교육시설물의 부위별 공사비 및 유지관리비 분석을 목적으로 수행되었다. 이를 위해 BTL 사업으로 발주된 서울지역에 위치한 초등학교 4곳을 사례 대상으로 선정하였다. 이렇게 선정된 사례 대상을 바탕으로 부위별 체계 정립을 위한 모델을 제시하였으며, 정립된 부위별 체계에 따라 공사비 및 유지관리비를 분석하였다. 이에 따라 부위별 공사비 분석표와 유지관리비 분석표 그리고 교육시설물의 적정 공사비 및 유지관리비를 제시하였다. 상기와 같은 목적과 방법에 따라 진행된 본 연구의 결론을 요약하면 다음과 같다. 1)사례 대상 학교 4곳의 부위별 공사비 산정에 따른 평균 금액 비율을 살펴보면 다음과 같다. 총 공사비 6,666백만원 대비 구조체 47.15%, 건물외부 8.34%, 건물내부 23.37%, 전기 소화 5.74%, 급수 위생 4.27%, 난방 급탕 5.25%, 옥외시설 1.36%, 토목 4.51%를 차지하는 것으로 분석되었다. 2)사례 대상 학교 4곳의 부위별 유지관리비 분석에 따른 평균 금액 비율을 살펴보면 다음과 같다. 총 유지관리비 4,309백만원 대비 건물외부 11.02%, 건물내부 41.81%, 전기 소화 14.81%, 급수 위생 11.22%, 난방 급탕 12.76%, 옥외시설 5.75%, 토목 2.63%를 차지하는 것으로 분석되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2711-2717
• /
• 2011

This paper presents the classification scheme of the signal facilities on the railroad considering the construction costs and maintenance costs in a low population area. The construction costs of the new signal facility system can be compare with the costs of the present signal facilities as the classification scheme. The signal facilities on the railroad were classified as the railroad security regulations and then the scheme is considered through the LCC analysis. In order to test this research, the costs of signal facilities obtained from ones on TAEBACK railroad line. The costs categorized the construction costs, the labor cost and the maintenance costs can be effectively applied to the LCC analysis. The scheme is very useful to make a decision whether the new signal facilities on railroad in low population area is build or not in terms of the costs.

• 한국건축시공학회지
• /
• 제5권1호
• /
• pp.97-103
• /
• 2005

Building costs means capital costs which include cost of land, costs of acquiring and preparing the site, construction costs, professional fees, furnishings, cost of financing the project. and cost of management required to run and maintenance the building for use. There are several phases that determine the building costs : design phase, construction phase, and operation & maintenance phase. So, the cost of work could be set against the examining the full range of complexities that a building program might contain. To solve this problem, it needs to compute building cost systematically. This is still in the development stage, awaiting the organization of rational cost data base. The method of cost saving by cost control could be constituted by detailed knowledge of building costs for all possible combinations of components and subsystems that can be assembled into integration model of cost factor on each phase of project development. The model of cost saving in each building phase is available for procedures of cost control of building systems.

• 한국건설관리학회논문집
• /
• 제9권3호
• /
• pp.136-145
• /
• 2008

현행 규정에 따라 기성을 지급하였어도 공공공사 발주자가 공사대금 이외에 금융비용이라는 추가비용을 부담해야 되는 경우가 발생되고 있다. 본 연구는 공공공사 건설과정에서 발생하는 금융비용을 파악하기 위하여 실제 공공공사 기성지급사례를 토대로 다음과 같은 연구결과를 도출하였다. 첫째 금융비용 발생원인을 분석하였고, 둘째 전체 금융비용 규모를 파악하고 이 중 발주자에게 미치는 영향을 파악하였으며, 셋째 금융비용이 발생시점에 따라 전체 금융비용에 미치는 영향을 비교 분석하였다. 본 연구에서 2건의 공공공사 금융비용 사례 분석결과 금융비용을 최소화하기 위해서는 입찰설명서 등 공사 착수 전에 공정과 기성관리 세부기준을 설정해야 한다. 또한 금융비용은 발생시점에 비례하여 발생하므로 공사초기의 공정관리에 집중해야 하는 것으로 분석되었다. 공공기관 건설공사 기성이 매년 2조 3천억 이상 발생되고 있지만 건설과정에서 기성지급 시 발생되는 금융비용이 얼마나 되는지 산출된 연구결과가 없어 그 규모를 인식하지 못하였다. 따라서 본 연구결과를 통하여 공공공사 시 기성지급으로 발생되는 금융비용 규모를 인식하고 관련규정의 보완과 대안을 도출해 내는 데 연구의 목적이 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.148-151
• /
• 2004

When we have been estimated construction costs, till now, we are used to costs accumulating method of each items based on standard labors rates. But there are some problems of its methods. Our governments are applied to a historical construction costs estimation system fur building construction and civil engineering works from January 2004. The electrical construction works are forecasted that applied to historical construction cost estimation systems. This paper is supposed to reasonable estimation methods of overhead costs and profits.

• 한국건설관리학회논문집
• /
• 제7권6호
• /
• pp.202-211
• /
• 2006

Rework in the construction industry can adversely affect project cost and schedule performance. Based on direct rework costs recorded on 359 construction projects, this paper presents an assessment of the magnitude of rework by various types of projects and sources of rework. The results from this paper establish that on average 4.5% and 2.5% of actual construction costs were spent on rework for owner and contractor projects, respectively. Furthermore, this paper determines that the direct rework costs differ by project types and sources of rework. Finally, it permits the development of rework reduction initiatives. By quantifying and recognizing the different magnitude of rework, the industry can be aware of the waste from rework and develop effective plans for managing rework, ultimately improving project cost performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 전기설비
• /
• pp.37-39
• /
• 2005

When we have been estimated construction costs, till now, we are used to costs accumulating method of each items based on standard labors rates. But there are some problems of its methods. Our governments are applied to a historical construction costs estimation system for building construction and civil engineering works from January 2004. The electrical construction works are forecasted that applied to historical construction cost estimation systems. This paper is showed to development of electrical construction cost index for estimation of historical costs and contract prices.