• Tunnel and Underground Space
• /
• v.26 no.3
• /
• pp.220-234
• /
• 2016

Sprayable waterproofing membrane has been considered as a substitute for a sheet waterproofing membrane in a variety of underground excavation works. However, fundamental properties of sprayble waterproofing membrane have not been fully given yet. In this study, a new two-component sprayable waterproofing membrane prototype was developed. In addition, its physico-mechanical properties were measured and compared with those of two kinds of thin spray-on liners where constitutive materials and construction methods are very close to each other. From direct tensile tests, the sprayable waterproofing membrane with elongations at break between 250% and 300% showed much higher ductility than TSLs. However, the sprayable waterproofing membrane had a limitation as a support member since its bond strength and loading capacity was lower than those of TSLs. From three-dimensional X-ray CT images, the porosity of the sprayable waterproofing membrane was estimated to be 26.13%. However, most of pores which might have been generated during membrane curing were not observed to be interconnected but isolated.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.6
• /
• pp.25-33
• /
• 2020

In this paper, the purpose is to verify the impact of performance expectations, effort expectations, social impact, individual innovation and perceived value on the intent of use and the behavior of use. Used Unified Theory of Acceptance and Use of Technology (UTAUT) to verify the applicability of this model in China, and established the research model by adding two new variables to UTAUT according to the situation of the Chinese market. To achieve this goal, 345 questionnaires were collected for experienced music creators using artificial intelligence nuggets in China by means of Internet research. The collected data were analyzed through frequency analysis, factor analysis, reliability analysis, and structural equation analysis through SPSS V. 22.0 and AMOS V 22.0. The verification of the hypotheses presented in the research model identified the decisive influence factors on the use of artificial intelligence music acceptance by Chinese users. The study is innovative in that it attempts to verify the applicability of UTAUT in the Chinese context. In the construction of the user acceptance model of AI music, three influencing factors will have an effect on users' intentions, and according to the degree of effect, from largest to smallest, they are respectively Perceived Innovativeness, Performance Expectancy and Effort Expectancy. This paper will also provide some management advices, i.e. improving the utility and usability of AI music, encouraging users with individual innovativeness, developing competitive and attractive pricing policies, increasing publicity, and prioritizing word-of-mouth advertising.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.1073-1090
• /
• 2018

Since the domestic utility tunnels were built mainly in the development project of the new city, they are all in the form of cut-and-cover box tunnel. But, in the case of overseas construction of utility tunnels for existing urban areas, the bored tunnel types are mainly adopted. It is reasonable to install bored tunnels in a downtown area because it is difficult to block the roads or install bypass roads due to heavy traffic and civil complaints. In order to activate the utility tunnels in bored type, it is necessary to secure optimized cross-sectional design technology considering the optimal supplying capacity and mutual influencing factors (Thermal Interference, electrolytic corrosion, efficiency of the maintenance, etc.) of utilities (power cables, telecommunication cables, water pipes, etc.). The optimal cross-section design method for bored utility tunnels is ultimately to derive the optimal arrangement technique for the utilities. In order to develop the design methods, firstly, the cases of tunnel cross-section (Shield TBM, Conventional Tunneling) in overseas shall be investigated to analyze the characteristics of the installation of utilities in the section and installation of auxiliary facilities, It is necessary to sort out and analyze the criteria related to the inner cross-section design (arrangement) presented in the standards and guidelines.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.649-656
• /
• 2019

Flux cored arc welding (FCAW), which is used widely in many fields, such as shipyards, bridge structures, construction machinery, and plant industry, is an alternative to shielded metal arc welding (SMAW). FCAW is used largely in the welding of carbon and alloy steel because it can be welded in all poses and obtain excellent quality in the field under a range of working conditions. In this study, the mechanical properties of welded parts were analyzed after different welding of SS400 and SM490A using FCAW. The following conclusions were drawn. The tensile test results satisfied the KS standard tensile strength in the range of 400~510 N/mm2 in all welding positions. The bending test confirmed that most of the specimens did not show surface breakage or other defects during bending and exhibited sufficient toughness, even after plastic deformation. The hardness test results were lower than the standard value of 350 Hv of KS B 0893. Similar to the hardness test, were greater than the KS reference value. The macro test revealed no internal flaws, non-metallic inclusions, bubbles or impurities on the entire cross section of the weld, and there were no concerns regarding lamination.

• The Journal of the Korea Contents Association
• /
• v.19 no.7
• /
• pp.335-347
• /
• 2019

China's 'One Belt and One Load' initiative is a mega-infrastructure project that connects China and the Eurasian Economies Area by overland and sea routes. Therefore, if it goes smoothly, It will be a new engine for economic development in China and the world, and It is expected to be a factor that will change the structure of the international economy. Especially, the Eurasian continent is likely to develop into the center of the global economy. But China's 'One Belt and One Load' initiative is not only macro and long-term, but also implies complexity, making it hard to be optimistic about development. China's 'One Belt and One Load' initiative is not only strongly promoted as a long-term national development strategy to be completed by 2049, but also strong economic complementarity between China and 'One Belt and One Load' consecutive countries. And many of the successive countries are expecting 'One Belt and One Load' construction. Therefore, there is no possibility at all. In particular, the possibility of development can not be completely ruled out, given the various policies of 'One Belt and One Load' currently being pursued by China. Even if it doesn't go smoothly, the process alone will have significant economic effects on China and neighboring countries, so it will be meaningful. With the help of information technology.

• Korean Journal of Heritage: History & Science
• /
• v.33
• /
• pp.210-255
• /
• 2000

This study aims to classify the framework and arrangement of interior columns (Naeju) which are used in single-story Buddhist halls into several types, and to develop a theory on the process of changes among those types. Since interior columns are building materials which hold up the roof structure and make partitions in the interior space of halls, their framework and arrangement is closely linked to the development of building technology and is expected to reflect new architectural needs. The kinds of interior columns classified by the shape of framework are goju, chaduju, oepyonju, naepyonju. The arrangement of interior columns can he classified by two methods: One which counts the number of the interior column arrangements in a hall, and the other whose classification relates with the side wall columns - Jeongchibup and yijubup. With the combination of these classifications, we can divide the framework and arrangement of interior columns into 8 types From the remains of Korean and Chinese Architecture, we can presume that before the late-Goryo period, jeongchibup had always been applied in the construction of Buddhist halls, and gamju(column reducing) had only been used in examples of small scale. After the founding of Choseon Kingdom, however, national policy had weakened the economic power of Buddhist temples. Because of that, large-scale outdoor Buddhist mass was replaced by small-scale indoor mass, and for this reason, though the scale of Buddhist halls became smaller, the need for a broad interior space became stronger. Thus in early-Choseon period, reduction of interior columns became widely spread. Those types of framework and arrangement of interior columns where yijubup was applied were developed because the rear interior columns arrangements, in order to expand the interior space, have moved backward. Among these types, yiju-goju and yiju-chaduju were developed for the Buddhist halls with paljak roof(hipped-gabled roof), where the load of their side eaves caused structural problems at the side walls. And oepyonju type was for the small-scale and middle-scale Buddhist halls which needed more interior space but didn't want the extension of roof structure. From the local and periodic distribution of each types, we can conclude that the types jeongchi-goju, jeongchi-chaduju and yiju-chaduju have been settled as typical technique of local carpenters. Oepyonju was developed later than the other types, but for its merit of low cost, it became a popular type across the nation.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.2
• /
• pp.61-70
• /
• 2019

Geopolymer is an eco-friendly construction material that has various advantages such as reduced $CO_2$ emission, fire resistance and low thermal conductivity compared to cement. However, it has not been many studies on the thermal behavior of the surface of the geopolymer panel when flame is applied to the surface. In this study, surface characteristics of hardened geopolymer on flame exposure was investigated to observe its characteristics as heat-resistant architectural materials. External structure changes and crack due to the heat shock were not observed during the exposure on flame. According to the residue of calcite and halo pattern of aluminosilicate gel, decarboxylation and dehydration were extremely limited to the surface and, therefore, it is thought that durability of hardened geopolymer was sustained. Gehlenite and calcium silicate portion was inversely proportional to quartz and calcite and significantly directly proportional to BFS replacement ratio. Microstructure changes due to the thermal shock caused decarboxylation and dehydration of crystallization and it was developed the pore and new crystalline phase like calcium silicate and gehlenite. It is thought that those crystalline phase worked as a densification and strengthening mechanism on geopolymer panel surface.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.561-568
• /
• 2020

Wave measurements using X-band radar have many advantages compared to other wave gauges including wave-rider buoy, P-u-v gauge and Acoustic Doppler Current Profiler (ADCP), etc.. For example, radar system has no risk of loss/damage in bad weather conditions, low maintenance cost, and provides spatial distribution of waves from deep to shallow water. This paper presents new methods for estimating significant wave heights of X-band marine radar images using Artificial Neural Network (ANN). We compared the time series of estimated significant wave heights (Hs) using various estimation methods, such as signal-to-noise ratio (${\sqrt{SNR}}$), both and ${\sqrt{SNR}}$ the peak period (TP), and ANN with 3 parameters (${\sqrt{SNR}}$, TP, and Rval > k). The estimated significant wave heights of the X-band images were compared with wave measurement using ADCP(AWC: Acoustic Wave and Current Profiler) at Hujeong Beach, Uljin, Korea. Estimation of Hs using ANN with 3 parameters (${\sqrt{SNR}}$, TP, and Rval > k) yields best result.

• International Journal of Computer Science & Network Security
• /
• v.22 no.11
• /
• pp.141-148
• /
• 2022

The development of the education system and the labor market today requires new conditions for unification and functioning, the introduction of an innovative culture in the field of Education. The construction of modern management of innovative development of a higher education institution requires consideration of the existing theoretical, methodological and practical planes on which its formation is based. The purpose of the article is to substantiate the modern paradigm of organizing the mechanism of managing the innovative development of higher education institutions. Innovation in education is represented not only by the final product of applying novelty in educational and managerial processes in order to qualitatively improve the subject and objects of management and obtain economic, social, scientific, technical, environmental and other effects, but also by the procedure for their constant updating. The classification of innovations in education is presented. Despite the positive developments in the development of Education, numerous problems remain in this area, which is discussed in the article. The concept of innovative development of higher education institutions is described, which defines the prerequisites, goals, principles, tasks and mechanisms of university development for a long-term period and should be based on the following principles: scientific, flexible, efficient and comprehensive. The role of the motivational component of the mechanism of innovative development of higher education institutions is clarified, which allows at the strategic level to create an innovative culture and motivation of innovative activity of each individual, to make a choice of rational directions for solving problems, at the tactical level - to form motives for innovative activity in the most effective directions, at the operational level - to monitor the formation of a system of motives and incentives, to adjust the directions of motivation. The necessity of the functional component of the mechanism, which consists in determining a set of steps and management decisions aimed at achieving certain goals of innovative development of higher education institutions, is proved. The monitoring component of the mechanism is aimed at developing a special system for collecting, processing, storing and distributing information about the stages of development of higher education institutions, prediction based on the objective data on the dynamics and main trends of its development, and elaboration of recommendations.

• Industry Promotion Research
• /
• v.8 no.3
• /
• pp.181-199
• /
• 2023

E-commerce is gradually upgrading from traditional text and image formats to short video and livestreaming formats. Livestreaming e-commerce enriches the content and forms of information dissemination and product display, enhances the consumer's shopping experience, and gradually becomes the mainstream new consumer scene. However, there are many negative phenomena in the development of livestreaming e-commerce, such as false propaganda, counterfeit goods, and various negative events, which seriously affect the level of consumer trust in livestreaming e-commerce. Trust is the core competitive factor of livestreaming e-commerce. Based on previous research on trust theory and combined with the characteristic elements of "people, goods, and scenes" of livestreaming e-commerce, this article constructs a trust model for livestreaming e-commerce, proposes hypotheses, and proves through empirical research that factors such as store characteristics, livestream host characteristics, brand image, product information, platform reputation, livestreaming situation, and trust tendency have a significant positive impact on consumer trust. Based on the research conclusions, this article provides insights and management suggestions, such as emphasizing the construction of store characteristic indicators, creating desirable livestream host characteristics, focusing on product brand building and selection, maintaining the display of product information, selecting suitable livestreaming platforms, and creating rich content for livestreaming situations.