• Journal of KIISE:Software and Applications
• /
• v.32 no.4
• /
• pp.300-311
• /
• 2005

Terms are linguistic realization of technical concepts. Term constituents are important elements used for representing the concept. Since many new terms are created from the modification or combination of existing constituents, it is important to analyze term constituents for understanding the concept of the term. It means that term constituents offer clues for understanding the concept of terms. However, there are a couple of difficulties in matching concept unit and term constituents such as mismatching between a term constituent and a concept unit, homonym of term constituents and synonym of term constituents. To solve them, it is necessary to recognize concept units of term constituents. In this paper, we define an English term constituent as the concept unit and use an alignment algorithm between English-Korean term constituents in order to recognize concept units of term constituents. By our alignment algorithm we recognize Korean term constituents corresponding to an English term constituent with about $93\%$ precision.

• Resources Recycling
• /
• v.11 no.4
• /
• pp.11-16
• /
• 2002

Analysis and separation of constituent materials of old car have been performed by using the industrial shredding line. For this aim, three old cars made by domestic automobile manufacturers, Sonata II, Sephia and Prince were chosen and delivered in pressed form without engine, tires and doors, etc. Shredding line was substantially composed of pre- and main-shredder. cyclone, magnetic separation, eddy current separation and man-power separation. From the separation of shredder products, iron scrap was observed to be the major material of old car accounting for 60.1 ％ of total weight and non-ferrous metals involving Al, Cu and Zn, etc. were about 2％. Light fluff, about 90％ of total fluff product, was comprised with plastic, fiber and sponge, etc. and the fraction of 5 cm undersize in light fluff was 70.5%. In case of heavy fluff, however. rubber and plastic were found to be the major constituent materials of it. Among the constituent materials of fluff, plastic showed the highest calorific value, more than 10,000 cal/gr and leather and rubber showed relatively high chlorine content, 10.3 and 2.55 wt%, respectively.

• Journal of Powder Materials
• /
• v.15 no.6
• /
• pp.482-488
• /
• 2008

The indentation technique has been one of the most commonly used techniques for the measurement of the mechanical properties of materials due to its experimental ease and speed. Recently, the scope of indentation has been enlarged down to the nanometer range through the development of instrumentations capable of continuously measuring load and displacement. In addition to testing hardness, the elastic modulus of submicron area could be measured from an indentation load-displacement (P-h) curve. In this study, the hardness values of the constituent phases in Ti($C_{0.7}N_{0.3}$)-NbC-Ni cermets were evaluated by nanoindentation. SEM observation of the indented surface was indispensable in order to separate the hardness of each constituent phase since the Ti($C_{0.7}N_{0.3}$)-based cermets have relatively inhomogeneous microstructure. The measured values of hardness using nanoindentation were ${\sim}20$ GPa for hard phase and ${\sim}10$ GPa for binder phase. The effect of NbC addition on hardness was not obvious in this work.

• Journal of Korean Medicine Rehabilitation
• /
• v.25 no.4
• /
• pp.55-63
• /
• 2015

Objectives The purpose of this study is to analyze the osteoarthritis-related effect of each constituent herb of ChondroT, the herbal medicine that used for osteoarthritis. Methods We searched osteoarthritis-related studies on each constituent herb of ChondroT via five Korean Medicine web databases. We classified these studies by each constituent herb (Ostericii Radix, Angelica Gigas Nakai, Clematidis Radix, Lonicerae Flos, Phellodendri Cortex) and researched the osteoarthritis-related effect. Results We collected 18 studies (two studies of Ostericii Radix, five studies of Angelica Gigas Nakai, three studies of Clematidis Radix, six studies of Lonicerae Flos, and two studies of Phellodendri Cortex). All of these studies were composed of in vivo and in vitro, and there were six pharmacopuncture experimental study. All experiments showed the significant effects on specific inflammatory mediators. Conclusions These results suggest that ChondroT will be able to apply to the treatment of osteoarthritis through continuous research and development.

• Journal of Environmental Science International
• /
• v.23 no.4
• /
• pp.661-672
• /
• 2014

Due to tidal force, it is very difficult to estimate the hydraulic parameters of high permeable aquifer near coastal area in Jeju Island. Therefore, to eliminate the impact of tidal force from groundwater level and estimate the hydraulic properties, tidal response technique has been mainly studied. In this study we have extracted 38 tidal constituents from groundwater level and harmonic constants including frequency, amplitude, and phase of each constituent using T_TIDE subroutine which is used to estimate oceanic tidal constituents, and then we have estimated hydraulic diffusivity associated with amplitude attenuation factor(that is the ratio of groundwater level amplitude to sea level amplitude for each tidal constituent) and phase lag(that is phase difference between groundwater level and sea level for each constituent). Also using harmonic constants for each constituent, we made the sinusoidal wave and then we constructed the synthesized wave which linearly combined sinusoidal wave. Finally, we could get residuals(net groundwater level) which was excluded most of tidal influences by eliminating synthesized wave from raw groundwater level. As a result of comparing statistics for synthesized level and net groundwater level, we found that the statistics for net groundwater level was more insignificant than those of synthesized wave. Moreover, in case of coastal aquifer which the impact of tidal force is even more than those of other environmental factors such as rainfall and groundwater yield, it is possible to predict groundwater level using synthesized wave and regression analysis of residuals.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.4
• /
• pp.1-8
• /
• 2013

Constitutive modeling of constituent materials is very important for reinforced concrete (RC) frames. Cyclic constitutive behavior of unconfined concrete, confined concrete and reinforcing steel should be well defined in fiber-based discretization of RC sections. This study performs nonlinear dynamic analyses of RC frame structures to investigate the sensitivity of seismic behavior of such frames to different constitutive models of constituent materials. The study specifically attempts to examine confinement effects in concrete modeling and degrading effects in steel modeling, which substantially affects the monotonic, cyclic and seismic responses of RC members and frames. Based on the system level analysis, it is shown that the response of non-ductile frames is less sensitive to confined concrete models while the modeling of reinforcing steel is quite influential to the inelastic response of both non-ductile and ductile frames.

• Composites Research
• /
• v.33 no.6
• /
• pp.341-345
• /
• 2020

We propose a measurement method for evaluating constituent contents of carbon fiber/epoxy composites through a thermogravimetric analyzer (TGA). The sample used in the test was taken from a strand specimen made of carbon fiber/epoxy tow prepreg, and the change in weight of the sample over time was measured in real time. Using a field emission scanning electron microscope (FE-SEM), we examine the thermal damage condition of the carbon fiber depending on whether resin was removed or not. We find that it was possible to test even a small amount of sample when using TGA vis-à-vis using a conventional muffle furnace. In addition, TGA enables the temperature and exposure time to be controlled, allowing the constituent contents of composite materials to be efficiently and quantitatively evaluated.

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3841-3848
• /
• 2022

The effect of modifiers on the optical features and radiation defying ability of the Eu³⁺ ions doped multi constituent glasses was examined. XRD has established the amorphous nature of the specimen. The presence of various functional/fundamental groups in the present glasses was analyzed through FTIR spectra. The physical, structural and elastic traits of the glasses were explored. The variation in the structural compactness of the glass structure according to the incorporated modifier was enlightened to describe their suitability for a better shielding media. For the examined glasses, the metallization criterion value varied in the range 0.613-0.692, indicating the non-metallic character of the glasses with possible nonlinear optical applications. The computed elastic moduli expose the Li-containing glass (BTLi:Eu) to be tightly packed and rigid, which is a requirement for a better shielding channel. Furthermore, the optical bandgap and the Urbach energy values are calculated based on the optical absorption spectra. The evaluated bonding parameters revealed the nature of the fabricated glasses covalent. In addition, we investigated the radiation attenuation attributes of the prepared Eu³⁺ ions doped multi constituent glasses using Phy-X software. We determined the linear attenuation coefficient (LAC) and reported the influence of the five oxides Li₂O₃, CaO, BaO, SrO, and ZnO on the LAC values. The LAC varied between 0.433 and 0.549 cm^-1 at 0.284 MeV. The 39B₂O₃-25TeO₂-15Li₂O₃-10Na₂O-10K₂O-1Eu₂O₃ glass has a much smaller LAC than the other glasses.

• Journal of Korean Medical classics
• /
• v.35 no.3
• /
• pp.21-31
• /
• 2022

Objectives : The Gyotae-hwan formula has traditionally been applied to conditions of fearful throbbing[怔忡] and insomnia due to disharmony of the Heart and Kidney, of which experimental and clinical research has been carried out while those on its pathological mechanism and constituent compatibility have been inadequate. Methods : Pathological mechanism and constituent compatibility of the Gyotae-hwan formula as listed in the 『Comprehensive Medicine According to Master Han』(韓氏醫通) and the『Simple Recipes for Four Disciplines』(四科簡效方) were analyzed. Findings from recent researches searched using the keywords '交泰丸' and '교태환' in the OASIS and CNKI databases were referenced as well. Results : The Gyo-tae hwan was first mentioned in the text 『Comprehensive Medicine According to Master Han』by Mao Han in terms of constituent medicinals and application while measurements and name of formula were not listed while the concept of harmony between the Heart and Kidney was mentioned. In the『Simple Recipes for Four Discipline s』 written by Shixiong Wang, measurements of constituent medicinals, usages and name of formula were finally mentioned, along with its efficacy to treat fearful throbbing and insomnia due to disharmony between the Heart and the Kidney. Conclusions : In conclusion, the Gyo-tae hwan uses Coptidis Rhizoma as chief herb and Cinnamomi Cortex as assistant herb to change the state of disharmony between the Heart and Kidney to a harmonious state, treating insomnia and fearful throbbing.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.1
• /
• pp.28-42
• /
• 2017

Moisture transfer characteristics of high emotional garments are important to evaluate wear comfort. Wicking and drying measurement methods are also critical for perspiration absorption and quick dry fabric made of high functional fibers. In this study, the wicking and drying properties of high emotional fabrics made from hybrid composite yarns using CoolMax, Tencel, Bamboo staple fibers and PP. PET CoolMax filaments were also measured and analyzed according to various measuring methods. The wicking property of hybrid composite yarn fabrics by Bireck method was mostly influenced by the structure of hybrid yarns than the absorption rate of constituent fibers; however, both the hygroscopicity of fibers and the composite yarn structure affected the wicking property of the fabrics in the drop method. Concerning drying properties, the KSK 0815B method measuring distilled moisture weight was more relevant to explain the drying characteristics of hybrid yarn fabrics than the KSK 0815A method measuring the time to drying. This study revealed that the drying properties of hybrid yarn fabrics were influenced by the hygroscopicity of constituent fibers, wicking properties of constituent yarns and structure of composite yarns.