• 제목/요약/키워드: Constant rate model

검색결과 888건 처리시간 0.029초

높은 지표각에서 해상 클러터 환경을 고려한 해상 표적 영상 생성 및 탐지 (Maritime Target Image Generation and Detection in a Sea Clutter Environment at High Grazing Angle)

  • 진승현;이경민;우선걸;김윤진;권준범;김홍락;김경태
    • 한국전자파학회논문지
    • /
    • 제30권5호
    • /
    • pp.407-417
    • /
    • 2019
  • 탄도 미사일은 상공에서 자유 낙하하며 표적을 요격하기 때문에 탄도 미사일에 부착되는 탐색기는 높은 지표각에서 해상 클러터 영향을 받게 되며, 그 결과 탐색기의 탐지 성능이 급격히 낮아지게 된다. 이를 해결하기 위해서는 다양한 시나리오 기반의 시뮬레이션들을 통한 해상 표적 탐지 성능 분석이 반드시 필요하다. 따라서 본 논문에서는 실제와 유사한 높은 지표각의 해상 클러터 수신 신호를 모델링한 후, 이를 신호 대 클러터 비에 따라 해상 표적 수신 신호와 합성하여 2차원 레이다 영상을 생성한다. 이후, 레이다 영상에 2차원 CA-CFAR 탐지기를 적용하여 다양한 시나리오에서 해상표적 탐지 성능을 분석하였다. CAD 모델과 전자기 수치해석 도구를 사용한 시뮬레이션 결과, 지표각과 방위각에 따라 해상 표적의 탐지 여부가 다르게 나타남을 확인할 수 있었다.

EC-MBR 공정의 MLSS, 전류밀도 및 접촉시간이 막 오염 감소에 미치는 영향 모델링 (Modeling of the effect of current density and contact time on membrane fouling reduction in EC-MBR at different MLSS concentration)

  • 김완규;장인성
    • 상하수도학회지
    • /
    • 제33권2호
    • /
    • pp.111-119
    • /
    • 2019
  • Electro-coagulation process has been gained an attention recently because it could overcome the membrane fouling problems in MBR(Membrane bio-reactor). Effect of the key operational parameters in electro-coagulation, current density(${\rho}_i$) and contact time(t) on membrane fouling reduction was investigated in this study. A kinetic model for ${\rho}_i$ and t required to reduce the membrane fouling was suggested under different MLSS(mixed liquor suspended solids) concentration. Total 48 batch type experiments of electro-coagulations under different sets of current densities(2.5, 6, 12 and $24A/m^2$), contact times(0, 2, 6 and 12 hr) and MLSS concentration(4500, 6500 and 8500mg/L) were carried out. After each electro-coagulation under different conditions, a series of membrane filtration was performed to get information on how much of membrane fouling was reduced. The membrane fouling decreased as the ${\rho}_i$ and t increased but as MLSS decreased. Total fouling resistances, Rt (=Rc+Rf) were calculated and compared to those of the controls (Ro), which were obtained from the experiments without electro-coagulation. A kinetic approach for the fouling reduction rate (Rt/Ro) was carried out and three equations under different MLSS concentration were suggested: i) ${\rho}_i^{0.39}t=3.5$ (MLSS=4500 mg/L), ii) ${\rho}_i^{0.46}t=7.0$ (MLSS=6500 mg/L), iii) ${\rho}_i^{0.74}t=10.5$ (MLSS=8500 mg/L). These equations state that the product of ${\rho}_i$ and t needed to reduce the fouling in certain amounts (in this study, 10% of fouling reduction) is always constant.

에틸렌다이아민테트라아세트산으로 개질된 벤토나이트를 이용한 합성폐수 내 아연 이온 흡착 (Adsorption of Zinc Ion in Synthetic Wastewater by Ethylenediaminetetraacetic Acid-Modified Bentonite)

  • 정명화;권동현;임연주;안종화
    • 한국물환경학회지
    • /
    • 제35권2호
    • /
    • pp.123-130
    • /
    • 2019
  • Ethylenediaminetetraacetic acid-modified bentonite (EMB) was used for adsorption of zinc ion (Zn) from aqueous solution, compared with unmodified bentonite (UB). Parameters such as dose (0.750 ~ 3.125 g/L), mixing intensity (10 ~ 150 rpm), contact time (0.17 ~ 30 min), pH (2 ~ 7), and temperature (298 ~ 338 K), were studied. Zn removal efficiency for EMB was 20 ~ 30 % higher, than that for UB, in all experiments. Thermodynamic studies demonstrated that adsorption process was spontaneous with Gibb's free energy (${\Delta}G$) values, ranging between -5.211 and -7.175 kJ/mol for EMB, and -0.984 and -2.059 kJ/mol for UB, and endothermic with enthalpy (${\Delta}H$) value of 9.418 kJ/mol for EMB and 7.022 kJ/mol for UB. Adsorption kinetics was found to follow the pseudo-second order kinetics model, and its rate constant was 3.41 for EMB and $2.00g/mg{\cdot}min$ for UB. Adsorption equilibrium data for EMB were best represented by the Langmuir adsorption isotherm, and calculated maximum adsorption capacity was 2.768 mg/g. It was found that the best conditions for Zn removal of EMB within the range of operation used, were 3.125 g/L dose, 90 rpm intensity, 10 min contact time, pH 4, and 338 K. Therefore, EMB has good potential for adsorption of Zn.

활성탄에 의한 에리스로신 염료수용액의 흡착특성에 관한 연구 (Study on Adsorption Characteristics of Erythrosine Dye from Aqeous Solution Using Activated Carbon)

  • 이종집
    • 공업화학
    • /
    • 제22권2호
    • /
    • pp.224-229
    • /
    • 2011
  • 입상활성탄에 대한 erythrosine의 흡착특성을 초기농도, 접촉시간 및 흡착온도를 변수로 하여 회분식실험을 통하여 조사하였다. Erythrosine에 대한 흡착동력학적 연구는 298 K에서 초기농도가 100, 250, 500 mg/L인 에리스로신 수용액에 대해 수행하였다. 흡착공정은 유사이차속도식에 잘 맞았으며 유사이차속도상수(k2)는 에리스로신의 초기농도가 높을수록 감소하였다. 에리스로신의 평형흡착관계는 298~318 K의 온도범위에서 Freundlich 등온식이 잘 적용되었다. 흡착자유에너지변화(${\Delta}G^o$), 엔탈피변화(${\Delta}H^o$), 엔트로피변화(${\Delta}S^o$)를 계산하여 본 결과, 표준자유에너지 변화량이 -3.72~-9.62 kJ/mol로 자발적인 공정임을 알았다. 엔탈피변화량이 양의 값을 나타내어 활성탄에 대한 에리스로신 염료의 흡착이 흡열반응임을 알 수 있었다.

무선통신망 기반 어구자동식별 모니터링 시스템 구현 및 시험환경 구축 (Implementation of Automatic Identification Monitoring System for Fishing Gears based on Wireless Communication Network and Establishment of Test Environment)

  • 정주명;박혜정;김민석;곽명신;선휘준
    • 전기전자학회논문지
    • /
    • 제25권1호
    • /
    • pp.193-200
    • /
    • 2021
  • 불법어업 방지와 유실어구 저감을 위해 해양환경에서 상시적이고 연속적인 어구 모니터링 시스템 개발이 필요하며, 본 논문에서는 수산자원 고갈로 점차 어로활동 범위가 넓어지는 현실과 열악한 해상환경을 고려한 25Km 이상의 통신 커버리지를 갖는 장기적 운용 가능한 신뢰성 있는 시스템 모델을 설계하고, 설계결과를 구현하여 14Km 떨어진 해상환경에 부이와 무선노드를 각각 설치하여 상용망과 Private LoRa망을 통한 통신 성공률을 구분 확인하고 수집된 위치정보를 통한 각 관제시스템의 관제기능을 확인함으로써 시스템의 운용 가능성을 검증하였다.

A new phantom to evaluate the tissue dissolution ability of endodontic irrigants and activating devices

  • Kimia Khoshroo ;Brinda Shah;Alexander Johnson ;John Baeten ;Katherine Barry;Mohammadreza Tahriri ;Mohamed S. Ibrahim;Lobat Tayebi
    • Restorative Dentistry and Endodontics
    • /
    • 제45권4호
    • /
    • pp.45.1-45.8
    • /
    • 2020
  • Objective: The aim of this study was to introduce a gelatin/bovine serum albumin (BSA) tissue standard, which provides dissolution properties identical to those of biological tissues. Further, the study evaluated whether the utilization of endodontic activating devices led to enhanced phantom dissolution rates. Materials and Methods: Bovine pulp tissue was obtained to determine a benchmark of tissue dissolution. The surface area and mass of samples were held constant while the ratio of gelatin and BSA were varied, ranging from 7.5% to 10% gelatin and 5% BSA. Each sample was placed in an individual test tube that was filled with an appropriate sodium hypochlorite solution for 1, 3, and 5 minutes, and then removed from the solution, blotted dry, and weighed again. The remaining tissue was calculated as the percent of initial tissue to determine the tissue dissolution rate. A radiopaque agent (sodium diatrizoate) and a fluorescent dye (methylene blue) were added to the phantom to allow easy quantification of phantom dissolution in a canal block model when activated using ultrasonic (EndoUltra) or sonic (EndoActivator) energy. Results: The 9% gelatin + 5% BSA phantom showed statistically equivalent dissolution to bovine pulp tissue at all time intervals. Furthermore, the EndoUltra yielded significantly more phantom dissolution in the canal block than the EndoActivator or syringe irrigation. Conclusions: Our phantom is comparable to biological tissue in terms of tissue dissolution and could be utilized for in vitro tests due to its injectability and detectability.

흰등멸구 [Sogatella furcifera (Horvath)] 온도 발육 모델 (Temperature-dependent Development Model of White Backed Planthopper (WBPH), Sogatella furcifera (Horvath) (Homoptera: Delphacidae))

  • 박창규;박홍현;김광호;이상계
    • 한국응용곤충학회지
    • /
    • 제52권2호
    • /
    • pp.133-140
    • /
    • 2013
  • 흰등멸구, Sogatella furcifera (Horvath), 의 온도에 따른 알 및 약충 발육 기간을 $12.5{\sim}5{\pm}1^{\circ}C$범위에서 $2.5^{\circ}C$ 간격으로 10개 항온, 14:10(L:D) h 광, 상대습도 20~30% 조건에서 조사하였다. 알은 $12.5^{\circ}C$를 제외한 모든 온도 조건에서 1령으로 성공적으로 발육하였으며, $1.5^{\circ}C$에서 22.5일로 가장 길었고, $32.5^{\circ}C$에서 5.5일로 가장 짧았다. 약충은 $15{\sim}32.5^{\circ}C$ 온도범위에서 성충까지 발육 가능하였으며, 약충 전체 발육기간은 $15^{\circ}C$에서 51.9일로 가장 길었으며 온도가 증가함에 따라 짧아져 $32.5^{\circ}C$에서 9.0일로 가장 짧았다. 온도와 발육률과의 관계를 설명하기 위해 선형 및 7개의 비선형(Analytis, Briere 1, 2, Lactin 2, Logan 6, Performance, Modified Sharpe and DeMichele) 모델을 사용하여 분석하였다. 선형 모델을 이용하여 추정한 알과 약충 전기간 발육을 위한 발육영점온도는 각각 $10.2^{\circ}C$$12.3^{\circ}C$였으며 발육에 필요한 유효적산온도는 각각 122.0, 156.3 DD였다. 7가지 비선형 모델 중 Briere 1 모델이 모든 발육단계에서 온도와 발육률과의 관계를 가장 잘 설명하였다($r^2$= 0.88~0.99). 알 및 유충의 발육단계별 발육완료 분포는 사용된 3가지 비선형(2-parameter, 3-parameter Weibull, Logistic) 모델 모두 2령과 5령을 제외한 발육단계에서는 비교적 높은 $r^2$(0.91~0.96) 값을 보여 양호한 모형 적합성을 보였다.

반음소 모델링을 이용한 거절기능에 대한 연구 (A Study on the Rejection Capability Based on Anti-phone Modeling)

  • 김우성;구명완
    • 한국음향학회지
    • /
    • 제18권3호
    • /
    • pp.3-9
    • /
    • 1999
  • 본 논문에서는 독립단어 음성인식 시스템을 위하여 반음소(anti-phone) 모델링을 이용한 인식 거절(rejection)기능에 대해 기술한다. 음성인식 거절 기능은 음성인식기를 제작할 ? 정해놓은 인식대상 단어 이외의 단어가 입력되었을 때 그 단어가 인식할 수 없는 단어임을 알려주는 기능이다. 음성인식 거절기능을 구하는 방식은 핵심어 검출(keyword spotting)방식과 발화검증(utterance verification)방식으로 구분된다. 핵심어 검출 방식은 인식 대상 단어 외의 단어를 별도로 모델링하여 하나의 인식대상 단어처럼 사용하는 방식이고, 발화검증 방식은 각 음소마다 그와 유사한 anti-model을 작성한 후 정상적인 음소 모델과 anti-model과의 유사도를 비교하여 결정하는 방식이다. 본 연구에서는 독립단어 음성인식 시스템에 적용될 수 있는 발화 검증 방식에 의해 음성인식 거절 기능을 구현하였다. 특히 유사도를 결정함에 있어서 산술평균, 기하평균, 조화평균을 사용하고 각각을 비교하여, 기하평균을 사용하는 방식이 우수한 성능을 보임을 알 수 있었다. 음성의 신뢰도(confidence score)를 정규화하기 위해서 Sigmoid 함수를 사용하는데 이 함수의 가중치(weight) 상수의 변화에 대해 인식률을 비교함으로써 가장 적절한 가중치 상수값을 결정하였다. 그리고 유사음소집합(cohort set)에 대한 실험에서는 유사음소집합의 크기가 클수록 더 좋은 성능을 보이는 결과를 얻었다. 음성인식 테스트 결과에서는 신뢰도 임계치 값을 구하고 이 값을 사용하여 인식률을 계산하였으며, 거절의 오류까지 포함된 음성인식률은 약 76%였다. 이 연구결과는 현재 한국통신에서 시험 서비스 중인 음성인식 증권정보 안내 시스템에 적용될 예정이다.

  • PDF

입상 활성탄을 이용한 말라카이트 그린의 흡착평형, 동력학 및 열역학 연구 (Adsorption Equilibrium, Kinetics and Thermodynamics Studies of Malachite Green Using Granular Activated Carbon)

  • 이종집
    • 공업화학
    • /
    • 제24권2호
    • /
    • pp.184-189
    • /
    • 2013
  • 수용액으로부터 유독한 말라카이트 그린 성분을 제거하는데 있어서 입상 활성탄의 활용가능성을 회분식 실험을 통해 살펴보았다. 흡착변수로서 흡착온도, 접촉시간과 초기농도의 영향을 조사하였다. 흡착평형자료로부터 Langmuir와 Freundlich 흡착등온식에 대한 적합성을 평가하였다. 298, 308 및 318 K에서 흡착평형은 Langmuir 흡착등온식이 더 잘 맞았으며, 계산된 분리계수 값으로부터 입상 활성탄에 의한 말라카이트 그린의 효과적인 처리가 가능하다는 것을 알 수 있었다. 동력학적 실험으로부터, 흡착공정은 유사이차반응속도식에 잘 맞으며, 속도상수($k_2$) 값은 말라카이트그린의 초기농도와 온도가 증가할수록 감소하였다. 활성화에너지, 엔탈피, 엔트로피 및 자유에너지변화와 같은 열역학파라미터들은 흡착공정의 특성을 평가하기 위하여 조사하였다. 활성화에너지의 계산값은 입상 활성탄에 대한 말라카이트 그린의 흡착이 물리적 공정임을 나타냈다. 자유에너지변화값($\Delta$G = -3.68~-7.76 kJ/mol)과 엔탈피변화값($\Delta$H = +26.34 kJ/mol)은 흡착공정이 298~318 K범위에서 자발적이고 흡열과정으로 일어난다는 것을 나타냈다.

Atrazine의 토양 흡착 및 탈착에 미치는 접촉시간의 영향 (Aging Effects on Sorption and Desorption of Atrazine in Soils)

  • 박정훈
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제10권1호
    • /
    • pp.26-34
    • /
    • 2005
  • 토양과 유기화합물의 접촉시간은 흡착과 탈착의 특성에 영향을 미치는 중요한 요소 중의 하나이다. 본 연구에서는 atrazine의 토양 흡착과 탈착에 미치는 접촉시간의 영향을 연구하였다. 등온 흡착실험을 수행하여 토양과 수용액 사이의 분배계수를 구하였고, 탈착에 대한 동력학 실험을 수행하고 three-site desorption모델을 이용, 회기분석 하여 탈착속도 계수들을 추산하였다. atrazine과 토양의 접촉시간은 2일에서부터 8개월까지 변화시켰다. 2일 흡착에 대한 atrazine의 흡착등온 곡선은 거의 선형이었고$(r^2>0.97)$, 흡착분배계수는 토양의 유기탄소 함량과 강한 양의 상관관계를 가졌으며 사용한 모든 토양에서 접촉시간이 길어질수록 증가하였다. 흡착곡선에서의 비선형성은 Houghton muck토양을 제외하고는 접촉시간에 따라 증가하지 않았다. 탈착실험 분석으로부터 접촉시간이 증가함에 따라 equilibrium site분율은 감소하고 non-desorbable site 분율은 증가함을 알 수 있었다. 사용한 모든 토양에서 토양유기탄소 함량으로 표준화한 경우 desorbable sites 에서의 atrazine농도는 접촉시간에 따라 비교적 일정한 것에 비해 non-desorbable site에서의 atrazine농도는 접촉시간이 증가함에 따라 증가하였다.