• Bulletin of the Korean Chemical Society
• /
• v.2 no.3
• /
• pp.96-104
• /
• 1981

(1) The flow data of f (stress) and ${\dot{s}$ (strain rate) for Fe and Ti alloys were plotted in the form of f vs. -ln ${\dot{s}$ by using the literature values. (2) The plot showed two distinct patterns A and B; Pattern A is a straight line with a negative slope, and Pattern B is a curve of concave upward. (3) According to Kim and Ree's generalized theory of plastic deformation, pattern A & B belong to Case 1 and 2, respectively; in Case 1, only one kind of flow units acts in the deformation, and in Case 2, two kinds flow units act, and stress is expressed by $f={X_1f_1}+{X_2f_2}$where $f_1\;and\;f_2$ are the stresses acting on the flow units of kind 1 and 2, respectively, and $X_1,\;X_2$ are the fractions of the surface area occupied by the two kinds of flow units; $f_j=(1/{\alpha}_j) sinh^{-1}\;{\beta}_j{{\dot{s}}\;(j=1\;or\;2)$, where $1/{\alpha}_j\;and\;{\beta}_j$ are proportional to the shear modulus and relaxation time, respectively. (4) We found that grain-boundary flow units only act in the deformation of Fe and Ti alloys whereas dislocation flow units do not show any appreciable contribution. (5) The deformations of Fe and Ti alloys belong generally to pattern A (Case 1) and B (Case 2), respectively. (6) By applying the equations, f=$(1/{\alpha}_{g1}) sinh^-1({\beta}_{g1}{\dot{s}}$) and $f=(X_{g1}/{\alpha}_{g1})sinh^{-1}({\beta}_{g1}{\dot{s}})+ (X_{g2}/{\alpha}_{g2})\;shih^{-1}({\beta}_{g2}{\dot{s}})$ to the flow data of Fe and Ti alloys, the parametric values of $x_{gj}/{\alpha}_{gj}\;and\;{\beta}_{gs}(j=1\;or\;2)$ were determined, here the subscript g signifies a grain-boundary flow unit. (7) From the values of ($({\beta}_gj)^{-1}$) at different temperatures, the activation enthalpy ${\Delta}H_{gj}^{\neq}$ of deformation due to flow unit gj was determined, ($({\beta}_gj)^{-1}$) being proportional to , the jumping frequency (the rate constant) of flow unit gj. The ${\Delta}H_{gj}\;^{\neq}$ agreed very well with ${\Delta}H_{gj}\;^{\neq}$ (self-diff) of the element j whose diffusion in the sample is a critical step for the deformation as proposed by Kim-Ree's theory (Refer to Tables 3 and 4). (8) The fact, ${\Delta}H_{gj}\;^{\neq}={\Delta}H_{j}\;^{\neq}$ (self-diff), justifies the Kim-Ree theory and their method for determining activation enthalpies for deformation. (9) A linear relation between ${\beta}^{-1}$ and carbon content [C] in hot-rolled steel was observed, i.e., In ${\beta}^{-1}$ = -50.2 [C] - 40.3. This equation explains very well the experimental facts observed with regard to the deformation of hot-rolled steel..

• Korean journal of applied entomology
• /
• v.60 no.4
• /
• pp.449-462
• /
• 2021

We analyzed the effects of temperature on the survival, development, and reproduction of the non-diapause Asian corn borer, Ostrinia furnacalis (Lepidoptera: Crambidae). A 16:8 h light:dark photoperiod was supplied to the non-diapause stages of O. furnacalis. The insects were raised on an artificial diet at seven constant temperatures between 15 and 35℃ for immature stages, and eight temperatures between 13 and 33℃ for the adult stage. The survival rate of eggs exceeded 70% at all temperatures, whereas survival of larvae was as low as 7.4% at 15℃. The developmental periods of the immature stages decreased with increasing temperature, but the larval period did not decrease further at 35℃. The pupal weight increased with increasing temperature, but the female weight decreased at 35℃. Variations with different last larval instars within the colonies at different temperatures were observed. Adults produced offspring at all tested temperatures. Adult longevity and the pre-oviposition and oviposition periods decreased with increasing temperature, but the pre-oviposition period increased at 33℃. Total fecundity exceeded 400 viable eggs at 22℃ and 31℃. The mean daily fecundity during the oviposition period and the mean daily fecundity on the day of oviposition increased with increasing temperature, but decreased at 33℃. Daily fecundity sharply increased at earlier adult ages and slowly decreased thereafter. The simulated oviposition frequency was greatest at 22℃. The lower developmental threshold temperatures were estimated to be the lowest at 9.7℃ for the first instar larva and the highest at 14.7℃ for the 5th to last instar larval stage, using a linear model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.695-700
• /
• 2018

This paper presents the development of compact and lightweight broadband power amplifier module using HMIC (Hybrid Microwave Integrated Circuit) technology that could be high-density integration for many non-packaged microwave components into the small area of a high dielectric constant printed circuit board, such as a ceramic substrate, also using the special design and fabrication schemes for the structure of minimized electromagnetic interference to obtain the homogeneous electrical performance at the wideband frequency. The results confirmed that the small signal gain has a gain flatness of ${\pm}1.5dB$ within the range of 32 to 36 dB. In addition, the output power satisfied more than 30 dBm. The noise figure was measured within 7 dB, and OIP3 (Output Third Order Intercept Point) was more than 39 dBm. The fabricated broadband power amplifier satisfied the target specification required to electrically drive the high power amplifiers of jamming generators for electronic warfare, so the actual applicability to the system was verified. Future studies will be aimed at designing other similar microwave power amplifiers in the future.

• Korean Journal of Environment and Ecology
• /
• v.33 no.3
• /
• pp.256-265
• /
• 2019

We investigated the ecological characteristics of Phoxinus phoxinus in the spring water in Eocheon stream from January to December 2016. The water temperature was $9.7{\sim}14.3^{\circ}C$ and remained below $15^{\circ}C$ throughout the year. The fishes cohabiting with minnow were Rhynchocypris kumgangensis (70.14%), Cottus koreanus (13.63%), Rhynchocypris oxycephalus (3.16%), Oncorhynchus mykiss (0.97%), Zacco koreanus (0.49%), and Iksookimia koreensis (0.24%). The sex ratio of female to male was 1:0.86. The frequency analysis of total length indicated that the fishes with the total length of 30 - 50 mm were one year old, those of 50 - 65 mm were two years old, those of 65 - 75 mm were three years old, and those of 75 mm or more were four years old. The sexually mature fishes were 50 mm or longer for female and 60 mm or longer for male. The spawning season was from April to July, and the water temperature was $12.3-14.3^{\circ}C$ during the period. The prosperous spawning season was from June to July, and the water temperature was $13.8-4.3^{\circ}C$ during the period. The average number of eggs in the ovaries was 508 per matured female, and the matured eggs were yellowish and spherical with a mean diameter of $1.58{\pm}0.13mm$. The length-weight correlation of P. phoxinus was $BW=0.000007TL^{3.09}$ with the constant a as 0.000007 and the parameter b as 3.09. The condition factor (K) was 0.99 (0.76 - 1.32) in average.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.2
• /
• pp.61-66
• /
• 2020

Recently, a variety of electric anesthetics devices have been developed and used in clinical practice to reduce the fatigue of the operator during local anesthesia for dental procedures and to compensate for the disadvantages of manual anesthesia device. In this electric anesthesia injection device, the accurate and constant delivery of pressure for drug infusion is a very important performance factor. In order to evaluate the accuracy of the transfer pressure, a small pressure gauge using a load cell is often used, but since the elastic body inside the load cell may not be able to accommodate a sufficient displacement, an error may occur when evaluating pressure performance. For these reasons, in this study, we proposed and evaluated a silicon-chrome steel (Si-Cr steel) spring jig that can accommodate relatively large displacements that can be used when evaluating the performance of a pressure-controlled pressure application device using a load cell type pressure gauge. As a result of the pressure transmissibility test and repeated measurement results using a commercial dental anesthesia injection device, a more stable result was obtained when using a spring jig, and it was confirmed that the frequency of abnormally high measurement was reduced.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_1
• /
• pp.1231-1244
• /
• 2022

The frequency of exposure of field crops to stress situations is increasing due to abnormal weather conditions. In South Korea, large-scale diseases in representative paddy rice cultivation area were happened. There are limits to field investigation on the crop damage due to large-scale. Satellite-based remote sensing techniques are useful for monitoring crops in cities and counties, but the sensitivity of vegetation index measured from satellite under abnormal growth of crop should be evaluated. The goal is to evaluate satellite-based normalized difference vegetation index (NDVI) retrieved from different spatial scales using drone imagery. In this study, Sentinel-2 and Landsat-8 satellites were used and they have spatial resolution of 10 and 30 m. Drone-based NDVI, which was resampled to the scale of satellite data, had correlation of 0.867-0.940 with Sentinel-2 NDVI and of 0.813-0.934 with Landsat-8 NDVI. When the effects of bias were minimized, Sentinel-2 NDVI had a normalized root mean square error of 0.2 to 2.8% less than that of the drone NDVI compared to Landsat-8 NDVI. In addition, Sentinel-2 NDVI had the constant error values regardless of diseases damage. On the other hand, Landsat-8 NDVI had different error values depending on degree of diseases. Considering the large error at the boundary of agricultural field, high spatial resolution data is more effective in monitoring crops.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.2
• /
• pp.251-258
• /
• 2023

In this paper, we propose DLP(Dual Linear Polarization) stack antenna for private network. The proposed antenna has general stack structure and design airgap between two substrate to obtain the maximum gain. Also, to improve cross polarization isolation, two feeding port is designed to separate for each substrate. The size of each patch antenna is 17.80 mm(W1)×16.70 mm(L1) for lower patch and 18.56 mm(W2)×18.73 mm(L2) for upper patch, which is designed on the FR-4 substrate which thickness (h) is 1.6 mm, and the dielectric constant is 4.3, and which is 40.0 mm(W)×40.0 mm(L) for total size of substrate. From the fabrication and measurement results, bandwidths of 100 MHz (4.74 to 4.84 GHz) for feeding port 1, and 150 MHz (4.67 to 4.82 GHz) for feeding port 2 are obtained on the basis of -10 dB return loss and transmission coefficient S21 is got under the -20 dB. Also, cross polarization isolation between each feeding port obtained

• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.536-542
• /
• 2021

In this paper, we proposed a triple band printed monopole antenna with a bent branch strips for WiFi / 5G. An antenna structure in which bent strips for generating multiple resonance are attached in the form of branches was newly proposed based on a typical monopole strip vertically erected as a triple band antenna structure. The proposed antenna is designed on a FR-4 substrate with dielectric constant 4.3, thickness of 1.6 mm, and size of 28×40 mm². The measured impedance bandwidth is 430 MHz (2.22~2.65 GHz) in the 2.4 GHz WLAN, 450 MHz (3.38~3.83 GHz) in the 3.5 GHz and 2390 MHz (4.95~7.34 GHz), In particular, it has been observed that antenna has a stable omnidirectional radiation patterns as well as gain of 1.537 dBi, 1.878 dBi and 2.337 dBi in the entire frequency band of interest.

• Journal of dental hygiene science
• /
• v.12 no.4
• /
• pp.404-412
• /
• 2012

The main object of this study is to render a better dental education to mental disabilities, teachers, and their parents. By providing a better dental education to them, mental disabilities would understand the importance of their oral hygiene. The study was held in Seoul at two different locations, named H and E mental welfare facilities. Ninety Three mental disabilities were studied by observing their oral behavior, simple oral hygiene index and plaque index prior and post to dental education. At the end of education, following result were gathered from two mental facilities. First, the level of oral behavior in Class 1,2, and 3 mental disabilities were observed prior and post to the dental education. Overall, there was no significant difference among Class 1 mental disabilities with the dental education. Second, in simple oral hygiene index, the severity of mental illness has affected on their oral behavior (F=6.322, p<.001). Third, in simple oral hygiene index, the frequency of dental education, regardless of severity of mental illness has affected on their oral hygiene (F=5.961, p<.01). Fourth, the plaque index also illustrated that the frequency of dental education, regardless of severity of dental illness has affected on their oral hygiene (F=5.126, p<.05). Finally, the general characteristics of mental disabilities according to changes in oral health awareness to gender, age, disability type, educational level do not statistically significant in all variables. Their simple oral hygiene index and plaque index advanced, although after a while they started to lose focus, which brought back their old habits. Nevertheless, in conclusion I believe that helping mental disabilities more frequently to constant reminder, will not only keep them entertained, but help them realize how important oral hygiene practice is, hopefully increasing and benefiting those with mental disabilities for future reference.

• Korean Journal of Remote Sensing
• /
• v.27 no.2
• /
• pp.191-201
• /
• 2011

Soybean has widely grown for its edible bean which has numerous uses. Microwave remote sensing has a great potential over the conventional remote sensing with the visible and infrared spectra due to its all-weather day-and-night imaging capabilities. In this investigation, a ground-based polarimetric scatterometer operating at multiple frequencies was used to continuously monitor the crop conditions of a soybean field. Polarimetric backscatter data at L, C, and X-bands were acquired every 10 minutes on the microwave observations at various soybean stages. The polarimetric scatterometer consists of a vector network analyzer, a microwave switch, radio frequency cables, power unit and a personal computer. The polarimetric scatterometer components were installed inside an air-conditioned shelter to maintain constant temperature and humidity during the data acquisition period. The backscattering coefficients were calculated from the measured data at incidence angle $40^{\circ}$ and full polarization (HH, VV, HV, VH) by applying the radar equation. The soybean growth data such as leaf area index (LAI), plant height, fresh and dry weight, vegetation water content and pod weight were measured periodically throughout the growth season. We measured the temporal variations of backscattering coefficients of the soybean crop at L, C, and X-bands during a soybean growth period. In the three bands, VV-polarized backscattering coefficients were higher than HH-polarized backscattering coefficients until mid-June, and thereafter HH-polarized backscattering coefficients were higher than VV-, HV-polarized back scattering coefficients. However, the cross-over stage (HH > VV) was different for each frequency: DOY 200 for L-band and DOY 210 for both C and X-bands. The temporal trend of the backscattering coefficients for all bands agreed with the soybean growth data such as LAI, dry weight and plant height; i.e., increased until about DOY 271 and decreased afterward. We plotted the relationship between the backscattering coefficients with three bands and soybean growth parameters. The growth parameters were highly correlated with HH-polarization at L-band (over r=0.92).