• 한국지반공학회지:지반
• /
• 제10권4호
• /
• pp.153-166
• /
• 1994

본 논문에서는 연속재하압밀시험을 적용하여 준설토의 거동을 연구하고 얇은 판을 이용하여 준설토의 강도 시험을 실시하는 새로운 실험 방법을 고안하여 실험을 하였다. 이 경우 준설토의 유동적 특성은 Bingham 모델로 설명할 수 있다. 이러한 방법을 위하여 정적 관입시험과 유동적 관입시험을 실시하였는데 두 방법은 모두 합 리적이고 실용성이 있었다. 특히 실험을 통하여 얻은 결론에 따르면 점토질이 많은 흙이나 실트 질 흙 모두에 대해서 함수비가 액성한계의 두배보다 적어지면 강도가 급격히 증가하는 반면,소 성지수의 경우 소성지수로 정규화한 함수비값이 실트는 10, 점토는 5이하가 되면서 소성지수로 정규화한 함수비값의 강도가 급격히 증가함을 알 수 있었다.

• 한국지반공학회지:지반
• /
• 제5권2호
• /
• pp.45-56
• /
• 1989

정규압밀 점성토의 응력-변형 거동은 응력경로에 의하여 어떠한 영향을 받게 되는가를 규명하기 위하여, 실험실에서 인위적으로 압밀한 Kaolin정성토 공시체를 사용하여 현위치 응력상태인 연. 응 역상태로 압밀하고, 여러가지 서로 다른 응력경로를 따라 삼축추축 배수시험을 행하였다. 그 결과, 응력증가비가 특정한 값, 곧 임계응력증가비를 가질 때 응력-변형 거동은 거의 녹형의 형태로 나타나고, 그 이상이 되면 응력의 증가와 더불어 재료의 성질이 강화되는 변형경화 현상을 나타내고 있음을 알 수 있었다. 본 연구에서는, 이러한 변Wi초화 현상을 보이는 응력-변형 거동을 Drnevich의 쌍유선 함수의 개념을 적용하여 모델화 하였으며, 이를 축대칭 하중을 받고있는지반의 응력경로를 고려한 여밀침하 계산에 적용하는 방법을 제시하였다.

• 전산구조공학
• /
• 제9권4호
• /
• pp.199-207
• /
• 1996

최근 10여년간 터널 막장면에서 연속적인 지지가 가능해진 연약 점토지반에서의 실드터널 시공법이 개발되었다. 이러한 실드공법은 굴착시 융기단계가 조절될 수 있으므로 테일보이드 내부로 토사의 이동을 감소시키는데 많은 도움을 줄 수 있다. 본 논문에서는 이러한 밀폐형 실드의 일종인 슬러리 실드와 토압식 실드의 계측치를 이용하여 실드터널 해석을 위해 개발된 2차원 탄소성 프로그램 EPSHILD에 적용시켜 검증하였다. 보다 정확한 해석수행을 위해 시공단계에 상응하는 굴착단계를 결정하였고 융기하중과 하중분담률을 고려하였다. 본 연구는 실드 시공과정에서 발생하는 즉시침하에 근거를 둔 것이며 장기침하에 대해서는 고려하지 않았다.

• 한국산학기술학회논문지
• /
• 제14권2호
• /
• pp.936-942
• /
• 2013

이 연구에서는 그동안 많은 연구가 이루어지지 않은 저치환율 SCP(sand compaction pile) 및 GCP(gravel compaction pile) 공법의 거동특성을 비교하기 위해 1g 모형시험을 수행하였다. 모형시험은 단위셀(unit cell) 개념을 적용하기 위해 단일말뚝 복합지반을 저치환율($a_s$=10%, 20%, 30%) 조건으로 조성하여 수행하였다. 모형시험결과 연약지반 개량을 위해서 SCP의 대체공법으로 GCP공법을 적용할 경우에 지반개량으로 인해서 발생하는 지지력 증가효과와 침하저감효과 및 압밀촉진효과는 SCP공법을 적용한 경우에 비해서 다소 우수한 것으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.174-187
• /
• 2005

Recently, because of environment, cost, supply and demand factors, though applying sea-sand as horizontal drains is getting difficult that usage of Gravel has been growing in large size of construction sites, Study on engineering properties and behavior characteristics of Gravel stratum is not thoroughgoing enough. We have applied Gravel Mat as the horizontal drains in O O construction site. We also conducted several field tests such as Material property test, Geosynthetics damage test with Repeated load, Discharge capacity test performed by inflow of upper soil and In-situ PBD Penetration test to review the application of Gravel Mat. Test results show that Gravel Mat is not only advantageous in Trafficability and Water drainage by Consolidation due to its great Internal friction angle and Permeability, but also easy to penetrate with Mandrel and has great discharge capacity and guarantee of the stability against geosynthetics damage at the same time. With these benefits Gravel Mat shows great application in fields.

• Geomechanics and Engineering
• /
• 제20권4호
• /
• pp.359-370
• /
• 2020

Prestressed ground anchors are important structural elements in geotechnical engineering. Despite their widespread usage, the design process is often significantly simplified. One of the major drawbacks of commonly used design methods is the assumption that skin friction is mobilized uniformly along an anchor's fixed length, one consequence of which is that a progressive failure phenomenon is neglected. The following paper introduces an alternative design approach - a computer algorithm employing the load-transfer method. The method is modified for the analysis of anchors and combined with a procedure for the derivation of load-transfer functions based on commonly available laboratory tests. The load-transfer function is divided into a pre-failure (hardening) and a post-failure (softening) segment. In this way, an aspect of non-linear stress-strain soil behavior is incorporated into the algorithm. The influence of post-grouting in terms of radial stress update, diameter enlargement, and grout consolidation is included. The axial stiffness of the anchor body is not held constant. Instead, it gradually decreases as a direct consequence of tensile cracks spreading in the grout material. An analysis of the program's operation is performed via a series of parametric studies in which the influence of governing parameters is investigated. Finally, two case studies concerning three investigation anchor load tests are presented.

• 한국재료학회지
• /
• 제24권4호
• /
• pp.180-185
• /
• 2014

The current concern about these materials ($MoSi_2$ and $NbSi_2$) focuses on their low fracture toughness below the ductile-brittle transition temperature. To improve the mechanical properties of these materials, the fabrication of nanostructured and composite materials has been found to be effective. Nanomaterials frequently possess high strength, high hardness, excellent ductility and toughness, and more attention is being paid to their potential application. In this study, nanopowders of Mo, Nb, and Si were fabricated by high-energy ball milling. A dense nanostructured $MoSi_2-NbSi_2$ composite was simultaneously synthesized and sintered within two minutes by high-frequency induction heating method using mechanically activated powders of Mo, Nb, and Si. The high-density $MoSi_2-NbSi_2$ composite was produced under simultaneous application of 80MPa pressure and an induced current. The sintering behavior, mechanical properties, and microstructure of the composite were investigated. The average hardness and fracture toughness values obtained were $1180kg/mm^2$ and $3MPa{\cdot}m^{1/2}$, respectively. These fracture toughness and hardness values of the nanostructured $MoSi_2-NbSi_2$ composite are higher than those of monolithic $MoSi_2$ or $NbSi_2$.

• 동아시아경상학회지
• /
• 제6권2호
• /
• pp.49-57
• /
• 2018

Purpose - to examine the theories related to the internationalization of multinational corporations as well as theories related to internationalization of small and medium-sized enterprises. Research design, data, and methodology - traditional theories, e.g. eclectic paradigm and behavioral theory and product life cycle etc. were examined and recent advances theories - network theory, entrepreneurship - were also examined to outline the theory of internationalization of firm. Results - the main schools of international researches are divided into two; one is the economics school, the other is the behavioral school. The economics school has considered internationalization as a pattern of investment in foreign markets explained by rational economic analysis of internalization, ownership, and location advantages. Apart from the economics approach, a theory relevant to smaller firms highlights slow and incremental overseas market commitment. Recent research on the network perspective is fast emerging and it can be applied and well explained on the internationalization of smaller firms, focusing on firm behavior in the context of a network of interorganizational and inter-personal relationships Conclusions - Small medium-sized enterprises have been recently rising, however, there has still been little consolidation of literature in internationalization and most of the relevant theories have been still focusing on explaining the globalization of multinational corporations. Little studied on the internationalization in the context of smaller firms which are distinctly differentiated from larger firms including international new ventures, which the motivation to study strongly calls for more information and studied on small medium-sized enterprises.

• 산업기술연구
• /
• 제22권B호
• /
• pp.191-197
• /
• 2002

This paper is experimental and numerical research results of performing centrifuge model tests to investigate the geotechnical engineering behavior of slag compaction pile as a substitute of sand compaction pile. In order to find the geotechnical engineering characteristics of the soft clay and the slag used in centrifuge model experiments, basic soil property tests, consolidation test, permeability tests and triaxial compression tests were performed. For centrifuge model tests, slags with changing relative density were used and their bearing capacity, stress concentrations in between pile and soft clay, settlement characteristics, and failure modes were investigated. As a results of centrifuge model tests, it was found that the bearing, capacity of model was increased with increasing density of slag pile and general shear failures were occured. Miniature soil pressure gauges were installed on model pile and soft ground respectively and thus vertical stress acting on them were measured. Stress concentration ratio was found to be in the range of 2.0~3.0. Bearing capacity obtained from the model test with slag was greater than that from the model test with a sand having the identical layout to each other. Thus it was confirmed the slag was an appropriate substitution of pile for sand.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.888-895
• /
• 2006

In this study, anisotropically consolidated undrained shear(CAU) test was performed to examine the variation of the shear strength according to the stress history. The specimen having 30% relative density was homogeniously prepared, and 200KPa of back pressure was applied to increase the B value more than 0.95. To make NC specimens, the vertical stress was applied on the specimen by 100KPa, 200KPa and 400KPa, and to make OC specimens, the vertical stress was applied upto 400KPa and was reduced to 200KPa and 100KPa resulting in OCR 2 and 4 respectively. The test result indicates the shear strength for the OC specimens are slightly higher then that of the NC specimens at the same confining pressure. The elastic modulus varies according to the confining stress and considerably affected by preconsolidation stress.