1 |
ACI 318-14 (2014), Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute; Farmington Hills, Michigan, U.S.A.
|
2 |
Barley, A.D. (1997), "The single bore multiple anchor system", Proceedings of the International Conference on Ground Anchorages and Anchored Structures, London, U.K., March.
|
3 |
Bezuijen, A. and Talmon, A.M. (2006), Grout Pressures around a Tunnel Lining, Influence of Grout Consolidation and Loading on Lining, in Tunnelling: A Decade of Progress, 104-114.
|
4 |
Dias, T.G.S. and Bezuijen, A. (2017), "Load-transfer method for piles under axial loading and unloading", J. Geotech. Geoenviron. Eng., 144(1), 4017096. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001808.
DOI
|
5 |
Bohn, C., Dos-Santos, A.L. and Frank, R. (2017), "Development of axial pile load transfer curves based on instrumented load tests", J. Geotech. Geoenviron. Eng., 143(1), 04016081. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001579.
DOI
|
6 |
Bustamante, M. and Diox, B. (1985), "Une methode pour le calcul des tirants et des micropieux injectes", Bull. Liaison LCPC, 140(3), 75-92.
|
7 |
CEB-FIP Model Code (1990), Design Code (1993), Comite EuroInternational Du Beton.
|
8 |
Duncan, J. and Chang, C. (1970), "Non-linear analysis of stress and strain in soils", J. Soil Mech. Found. Div., 96(5).
|
9 |
EN 1537 (2013), Execution of special geotechnical works. Ground anchors, European Committee for Standardization, Brussels, Belgium.
|
10 |
EN 1997-1 (2004), Eurocode 7 - Geotechnical design, Part 1: General rules, European Committee for Standardization, Brussels, Belgium.
|
11 |
Fabris, C., Schweiger, H. and Tschuchnigg, F. (2018), "Fe-analysis of anchor pull out tests using advanced constitutive models", Proceedings of the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018), Porto, Portugal, June.
|
12 |
ISO 22477-5 (2018), Geotechnical Investigation and Testing - Testing of Geotechnical Structures - Part 5: Testing of Grouted Anchors, International Organization for Standardization (ISO), Geneva, Switzerland.
|
13 |
Kraft, L.M., Kagawa, T. and Ray, R.P. (1997), "Theoretical t-z curves", J. Geotech. Eng. Div., 107(11), 1543-1561.
DOI
|
14 |
Littlejohn, G.S. (1980), "Design estimation of the ultimate load-holding capacity of ground anchors", Ground Eng., 13(8), 25-39.
|
15 |
Krammer, H. (1978), "Determination of the carrying capacity of ground anchors with the correlation and regression analysis", Rev. Fr. Geotech., 3, 76-81. https://doi.org/10.1051/geotech/1978003076.
DOI
|
16 |
Lambe, T.W. (1973), "Predictions in soil engineering", Geotechnique, 23(2), 149-202. https://doi.org/10.1680/geot.1973.23.2.151.
DOI
|
17 |
Larsen, P. (2007), "Soil anchors in clay till using post-grouting", Proceedings of the 14th European Conference on Soil Mechanics and Geotechnical Eng., Madrid, Spain, September.
|
18 |
Misove, P. (1984), "Construction of prestressed ground anchors and their bearing capacity (in Slovak)", Ph.D. Dissertation, VUIS, Slovakia.
|
19 |
Monsberger, C., Woschitz, H., Lienhart, W., Racansky, V. and Hayden, M. (2017), "Performance assessment of geotechnical structural elements using distributed fiber optic sensing", Proceedings of SPIE 10168: Smart Structures and NDE, Portland, Oregon, U.S.A., March.
|
20 |
Mothersille, D., Duzceer, R., Gokalp, A. and Okumusoglu, B. (2015), "Support of 25 m deep excavation using ground anchors in Russia", Geotech. Eng., 168(GE4), 281-295. https://doi.org/10.1680/geng.14.00043.
DOI
|
21 |
Reddy, E.S.B., O'Reily, M. and Chapman, D.N. (1997), "A software to predict the behaviour of tension piles", Comput. Struct., 62(4), 653-658. https://doi.org/10.1016/S0045-7949(97)80002-3.
DOI
|
22 |
Navratil, J. (2008), Prestressed Concrete Structures, CERM, Brno, Czech Republic (in Czech).
|
23 |
Ostermayer, H. (1975), "Construction carrying behaviour and creep characteristics of ground anchors", Proceedings of the Conference of Diaphragm Walls and Anchorages, London, U.K., September.
|
24 |
Pelecanos, L. and Soga, K. (2018), "Development of load-transfer curves for axially-loaded piles based on inverse analysis of fibre-optic strain data using finite element analysis and optimisation", Proceedings of the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018), Porto, Portugal, June.
|
25 |
Randolph, M.F. and Wroth, C.P. (1978), "Analysis of deformation of vertically loaded piles", J. Geotech. Eng., 104(12), 1465-1488.
|
26 |
Randolph, M.F., Steenfelt, J.S. and Wroth, C.P. (1979), "The effect of pile type on design parameters for driven piles", Proceedings of the 7th European Conference on Soil Mechanics and Foundation Engineering, Brighton, U.K., September.
|
27 |
Reddy, E.S.B., O'Reily, M. and Chapman, D.N. (1998), "Modified T-Z model - a software for tension piles", Comput. Struct., 68(6), 613-625. https://doi.org/10.1016/S0045-7949(98)00089-3.
DOI
|
28 |
Seo, H.J. and Pelecanos, L. (2018), "Finite element analysis of soil-structure interaction in soil anchor pull-out tests", Proceedings of the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018), Porto, Portugal, June.
|
29 |
Sulaiman, I.H. and Coyle, H.M. (1976), "Uplift resistance of piles in sand", J. Geotech. Eng. Div., 102(5), 559-562.
DOI
|
30 |
Svoboda, T., Masin, D. and Bohac, J. (2010), "Class A predictions of a NATM tunnel in stiff clay", Comput. Geotech., 37(6), 817-825. https://doi.org/10.1016/j.compgeo.2010.07.003.
DOI
|
31 |
Vukotic, G., Gonzalez Galindo, J. and Soriano A. (2013), "The influence of bond stress distribution on ground anchor fixed length design. Field results and proposal for design methodology", Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris, France, September.
|
32 |
PTI (2004), Recommendations for Prestressed Rock and Soil Anchors, Post-Tensioning Institute, U.S.A.
|
33 |
Wu, Y., Liu, J. and Chen, R. (2015), "An analytical analysis of a single axially-loaded pile using a nonlinear softening model", Geomech. Eng., 8(6), 769-781. https://doi.org/10.12989/gae.2015.8.6.769.
DOI
|
34 |
Weerasinghe, R.B. and Littlejohn, G.S. (1997), "Load transfer and failure of anchorages in weak mudstone", Proceedings of the International Conference on Ground Anchorages and Anchored Structures, London, U.K., March.
|
35 |
Woods, R.I. and Barkhordari, K. (1997), "The influence of bond stress distribution on ground anchor design", Proceedings of the International Conference on Ground Anchorages and Anchored Structures, London, U.K., March.
|
36 |
Wu, J., Cheng, Q., Wen, H., Wang, L., Li, Y. and Zhang J. (2016), "A load transfer approach to rectangular closed diaphragm walls", Proc. Inst. Civ. Eng. Geotech. Eng., 169(6), 509-526. https://doi.org/10.1680/jgeen.15.00156.
DOI
|
37 |
Zhang, Q., Li, S., Liang, F., Yang, M. and Zhang, Q. (2014), "Simplified method for settlement prediction of single pile and pile group using a hyperbolic model", Int. J. Civ. Eng., 12(2), 146-159.
|
38 |
Zou, J.F., Yang, T. and Deng, D. (2019), "Field test of the longterm settlement for the post-grouted pile in the deep-thick soft soil", Geomech. Eng., 19(2), 115-126. https://doi.org/10.12989/gae.2019.19.2.115.
DOI
|