• 한국표면공학회지
• /
• 제54권1호
• /
• pp.30-36
• /
• 2021

In this study, double-layered anodizing films were formed on Al 5052 and Al 6061 alloys consecutively first in sulfuric acid and then in oxalic acid, and hardness, withstand voltage, surface roughness and acid resistance of the anodizing films were compared with single-layered anodizing films in sulfuric acid and oxalic acid electrolytes. Hardness of the double-layered anodizing film decreased with increasing ratio of inner layer to outer layer for both Al 5052 and Al 6061 alloys, suggesting that outer anodizing film formed in sulfuric acid electrolyte is damaged during the second anodizing in oxalic acid electrolyte. Withstand voltage of the double-layered anodizing films increased with increasing the thickness ratio of inner layer to outer layer. Surface roughness of the double-layered anodizing films were comparable with that of single-layered anodizing film formed in sulfuric acid but higher than that of single layer anodizing film formed in oxalic acid electrolyte. In acid resistance test, all of the double-layered and single-layered anodizing films showed good acid resistance more than 3 h without any visible gas evolution, which is attributable to sealing of pores. Based on the experimental results obtained in this work, it is possible to design a double-layered anodizing film with cost-effectiveness and improved physical and electrical properties by combining two consecutive anodizing processes of sulfuric acid anodizing and oxalic acid anodizing methods.

• 천문학회지
• /
• 제29권spc1호
• /
• pp.165-166
• /
• 1996

A bottom-up model for the formation of GMCs is described, where the observed GMCs are the aggregates of less massive clouds. The aggregates are getting more and more massive in the process of consecutive collision between clouds.

• 한국산업보건학회지
• /
• 제23권4호
• /
• pp.341-347
• /
• 2013

Objectives: The aim of this study is to investigate the differences in airborne TDI concentrations based on the filter collection method and liquid collection method and to compare airborne TDIs concentrations by sampling method change when using the filter collection method in the spray-painting process. Methods: For the sample measurement, the filter collection method(OSHA#42) and liquid collection method(NIOSH#5522) were used; for the sampling method, the full-period single sampling and full-period consecutive sampling methods were used. The samples were collected in spray-painting and drying process locations. Results: In all samples collected from the spray-painting and drying process locations through the filter collection and liquid collection methods, greater amounts of 2,6-TDI than 2,4-TDI were detected. When the TDI collection concentrations based on the sampling methods were compared, the concentrations of 2,4-TDI and 2,6-TDI collected by the consecutive sampling method were higher than the concentrations of 2,4-TDI and 2,6-TDI collected by the single sampling method for both the filter collection method and liquid collection method used in the spray-painting process. These differences were statistically significant. Conclusions: When TDI collection concentrations based on the sample measurement methods were compared, the concentration of 2,4-TDI and 2,6-TDI collected through the liquid collection method were higher than the concentrations of 2,4-TDI and 2,6-TDI collected by the filter collection method, and the differences were statistically significant. In the drying process, no difference was shown in the collection concentrations of 2,4-TDI and 2,6-TDI with the two measurement methods.

• Environmental Engineering Research
• /
• 제16권4호
• /
• pp.231-236
• /
• 2011

Biological nitrogen removal, using a continuous flow packed-bed reactor (CPBR) in a consecutive nitrification and denitrification process, was evaluated. An apparent decline in the nitrification efficiency coincided with the steady increase in $NH_4{^+}$-N load. Sustained nitrification efficiency was found to be higher at longer empty bed contact times (EBCTs). The relationship between the rate of alkalinity consumption and $NH_4{^+}$-N utilization ratio followed zero-order reaction kinetics. The heterotrophic denitrification rate at a carbon-tonitrogen (C/N) ratio of >4 was found to be >74%. This rate was higher by a factor of 8.5 or 8.9 for $NO_3{^-}$-N/volatile solids (VS)/day or $NO_3{^-}-N/m^3$ ceramic media/day, respectively, relative to the rates measured at a C/N ratio of 1.1. Autotrophic denitrification efficiencies were 80-90%. It corresponds to an average denitrification rate of 0.96 kg $NO_3{^-}-N/m^3$ ceramic media/day and a relevant average denitrification rate of 0.28 g $NO_3{^-}$-N/g VS/day, were also obtained. Results presented here also constitute the usability of an innovative porous sulfur ceramic media. This enhanced the dissolution rate of elemental sulfur via a higher contact surface area.

• 말소리와 음성과학
• /
• 제6권1호
• /
• pp.47-58
• /
• 2014

The purpose of this paper is to find out how Korean speakers' speech production in English word boundaries differs from English speakers' and to account for what bring about such differences. Seeing two consecutive words as one single cluster, the English speakers generally pronounce them naturally by linking a word-final consonant of the first word with a word-initial vowel of the second word, while this is not the case with most of the Korean speakers; they read the two consecutive words individually. In consequence, phonological processes such as resyllabification and aspiration can be found in the English speakers' word-boundary production, while glottalization, and unreleased stops are rather common phonological process seen in the Korean speakers' word-boundary production. This may be accounted for by Korean speakers' L1 interference, depending on English proficiency.

• Journal of the Korean Statistical Society
• /
• 제30권1호
• /
• pp.89-98
• /
• 2001

Brown and Proschan(1983) introduced a model for imperfect repair. At each failure of a device, with probability p, it is repaired completely or replaced with a new device(perfect repair), and with probability 1-p, it is returned to the functioning state, but it is only recovered to its condition just prior to failure(imperfect repair or minimal repair). In this paper, we limit the number of consecutive minimal repairs by n. We find some useful properties about $\mu$$_{k}$, the expected time between the k-th and the (k+1)-st repair under he assumption that only minimal repairs are performed. Then, we assign cost to each repair and find the value of n which minimized the long-run average cost for a fixed p under the condition that the life distribution F os the device is DMRL.L.

• Food Science and Biotechnology
• /
• 제18권6호
• /
• pp.1511-1514
• /
• 2009

Liquid whole egg (LWE) was subjected to high hydrostatic pressure (HHP), a consecutive combination of nisin and HHP (nisin-HHP), or a consecutive combination of ultrasound and HHP (ultrasound-HHP), and functional properties of processed LWE were compared to those of raw LWE. Little changes in foaming and emulsifying properties were observed by the application of HHP alone and the combined process of nisin and HHP. In contrast, ultrasound-HHP combination resulted in significant changes in color, foaming, and emulsifying properties. The maintenance of functional properties after HHP treatment agreed with expectation, because the HHP processing condition had been selected where minimal rheological changes had occurred.

• Journal of the Korean Statistical Society
• /
• 제35권4호
• /
• pp.397-407
• /
• 2006

A new stochastic process is introduced for describing a mechanism of viruses. The process generalizes the $Bartoszy\'{n}ski's$ process ($Bartoszy\'{n}ski$, 1975a, 1975b, 1976) by allowing the stochastic perturbation between consecutive jumps to take into account the persistent infection (the infection without breaking infected cells). It is shown that the new process can be obtained by a weak limit of a sequence of Markov branching processes. Along with the construction of the new process, we study how the stochastic perturbation influences the risk of a symptom in an infected host. For this purpose, the quantal response model and the threshold model are investigated and compared through their induced survival functions.

• 정보관리연구
• /
• 제39권4호
• /
• pp.187-214
• /
• 2008

본고에서는 기록물의 내용이 아닌 기록이 생성된 기능에 기반을 두고 행해지는 전자기록 환경에서의 기능평가 프로세스를 분석하였다. 전자기록 환경에서 기능평가는 가장 보편화된 평가방식으로, 기록물의 생산 이전단계부터 수행되는 연속적인 업무 프로세스를 형성하게 된다. 종국적으로 기능평가를 기반으로 하는 전자기록 환경에서의 평가는 업무맥락 및 기록품질을 지님과 동시에, 조직의 영위 및 업무 수행에 필수적인 전자기록을 선별해 주게 된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1693-1696
• /
• 2004

Synchrotron X-ray micro-imaging technique was employed to monitor non-invasively the refilling process of water inside the xylem vessels in bamboo leaves. The consecutive phase-contrast X-ray images clearly show both plant anatomy and the transport of water inside the xylem vessels. Traces of water-rise, vapor bubbles and variations of contact angle between the water front and the xylem wall were measured in real time. During the refilling process, air bubbles are removed when the rising water front halts at a vessel end for a while. Subsequently, it starts rising again at a higher velocity than the normal refilling speed. Repeated cavitation seems to deteriorate the refilling ability in xylem vessels. In dark environment, the water refilling process in xylem vessels is facilitated more effectively than in bright illuminated conditions. Finally, X-ray micro-imaging was famed to be a powerful, high resolution, real time imaging tool to investigate the water refilling process in xylem vessels.