• ETRI Journal
• /
• v.19 no.4
• /
• pp.326-343
• /
• 1997

In this paper, we propose an ATM switch with the rate more than gigabits per second to cope with future broadband service environments. The basic idea is to separate the connection control flow from the data information flow inside the switch. The proposed switch has a dual-plane switch matrix with the synchronous control algorithm. The queuing behaviors of the proposed switch are shown by the discrete-time queuing analysis. Numerical analyses are taken both in the non-blocking crossbar switch and the banyan switch with internal blocking. Results show that a proposed dual-plane $16{\times}16$ switch would have the acceptable performance with maximum throughput of about 95 percent.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.1
• /
• pp.39-51
• /
• 1998

In this paper, we propose signaling procedures amon network elements for a connection rerouting method which can reduce inter-switch handoff processing delay reduces the delay in the connection re-routing by reserving VPI/VCIs for possible inter-switch handoff calls in advance. Additionally, we mathematically analyze the signaling procedures and then suggest solutions to the relations with cluser size, network topoloty, handoff-request rete and handoff delay. With simulation, the solutions are validated. From numerical examples, we concluded taht handoff delay, one of the handoff QoSs, can be satisfied by adjusting the cluster size and network topology according to the handoff -request rate of service area. With our proposed signaling and analytic methods, we concluded that the connection rerouting method using cluster-sectoring effectively reduces the delay of inter-switch handoff processing than dynamic connection rerouting method. Our solutions are useful in guaranteeing the requested handoff delay (especially, inter-switch handoff delay) when the connection rerouting method is applied to ATM-based wireless/wired integrated network.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.11 no.4
• /
• pp.305-309
• /
• 2011

A sparse reconfigurable adaptive filter (SRAF) based on a photonic switch determines the appropriate time delays and weight values for an optical switch implementation of tapped-delay-line (TDL) systems. It is well known that the choice of switch delays is significantly important for efficiently implementing the SRAF. If the same values exist as calculating the sum of weight magnitudes for implementing the connection constraint required by the SRAF, conventional connection algorithm based on sequentially selection the maximum elements might not work perfectly. In an effort to increase the effectiveness of system identification, an upgraded connection algorithm used progressive calculation to obtain the better solution is considered in this paper. The performance of the proposed connection constraint algorithm is illustrated by computer simulation for a system identification application.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.10
• /
• pp.11-16
• /
• 2004

This paper proposes the overload reduction method for the connection information audit processor in ATM switch. Based on this method, we design the simple IPC exchange method and non-stop auditing method for IPC loss. We evaluate the performance about the proposed Audit method. At the result of evaluation, we figure out that the p개posed audit method reduces the load of call control processor because of a fewer IPC and prevent stopping audit function for IPC loss because of requesting the lost connection information again. Therefore, we confirm that the proposed audit method can reestablish a Mismatched connection information with a little load and elevate correctness about audit function.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10c
• /
• pp.396-398
• /
• 1999

단일 망으로 다양한 서비스를 제공하기 위하여 하나의 스위치에서 다수의 제어소프트웨어를 지원해야 한다. 이를 위하여 스위치의 제어 인터페이스를 표준화하려는 시도가 활발하다. 본 논문에서는 다수의 스위치를 단일 제어기로 제어하는 ATM 연결 제어 방법을 제안한다. 본 논문에서 제안하는 방법으로 제어망과 트랜스포트 망을 분리함으로써 유연한 망의 구성이 가능해지고, 병렬 스위치 제어를 통하여 시그널링의 효율을 꾀할 수 있다. 이를 위하여 단일 스위치를 통한 복합 연결 (compound connection)에 대하여 단일 제어 인터페이스를 통한 제어가 가능한 원소 연결(atomic connection)로의 변환 모델 등을 제시한다.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.9-17
• /
• 2020

In this paper, as part of the research for the infrastructure of very high flexible and reconfigurable data center using very high speed crossbar switches, we developed a simulator that can model two and three dimensional connection structure of switches with an efficient control algorithm using software defined network and verified the functions and analyzed the performance accordingly. The simulator consists of a control module and a switch module that was coded using Python language based on the Mininet and Ryu Openflow frameworks. The control module dynamically controls the operation of switching cells using a shortest multipath algorithm to calculate efficient paths adaptively between configurable computing resources. Performance analysis by using the simulator shows that the three-dimensional switch architecture can accommodate more hosts per port and has about 1.5 times more successful 1:n connections per port with the same number of switches than the two-dimensional architecture. Also simulation results show that connection length in a 3-dimensional way is shorter than that of 2-dimensional way and the unused switch ratio in a 3-dimensional case is lower than that of 2-dimensional cases.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.10
• /
• pp.40-50
• /
• 1999

The novel network architecture is recently required to accommodate a variety and intelligence of communication services. It is also required to provide customized network functions and to efficiently satisfy a various user's requirements. Accordingly, open network architecture based on ATM transport network features has been mainly studied in communication network. This paper evaluates the VSN(Virtual Switch Network) characteristics in the call processing of IMT-2000 switching system, which is composed of VSN instead of ATM switch network. VSN means switch network which is composed of ATM transport network. As a result, this paper proposes new VSN based ATM-MSC architecture with integrated call and connection control systems. and evaluates call processing delay characteristics using call process procedures. Internal call processing delay is increased approximately 3.5msec than the conventional ATM switching system. The experimental values applied in the analysis condition are the load 0.8, and the 100km distance between CCCPs(Call and Connection Control Processors) and VSNs. It is confirmed that the VSN has the potentiality in the practical implementation.

• The KIPS Transactions:PartC
• /
• v.14C no.6
• /
• pp.525-536
• /
• 2007

Network Control Platform(NCP) and Qualify of Service Switch(QSS) are being developed to realize centralized control and management technology, which is essential for guaranteeing traffic engineering and service quality in a next generation network. This paper adopts a parallel mechanism, and a thread and object pool to achieve high-speed connection management in the existing SNMP interface between NCP and QSS. We built up a connection management test-bed in laboratory environment to validate the functionality of high-speed connection management. We also measured and analyzed a performance of connection setup delay and a completion ratio using the test-bed. We ascertain that the parallel mechanism and the object pool are the most important performance parameters to achieve high-speed connection management in the SNMP interface between NCP and QSS.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.255-258
• /
• 2000

This paper presents an Interprocessor Communication Network(IPC net) in ATM switching system. In order to supply stable and independent path for processor communication, additional network i.e., Ethernet, is suggested. An Ethernet switch centered on Ethernet binds each processor into a work range. IPC net proposed in this paper assures end-to-end inter-processor connection, uniform 100Mbps Ethernet bandwidth and enhanced user cell throughput of ATM switch with minimum Ethernet supporting block integrated into ATM system

• Journal of KIISE:Information Networking
• /
• v.29 no.4
• /
• pp.405-411
• /
• 2002

Open interfaces in the optica] Internet have been progressed by OIF's ISI, ITU-T ASTN's CCI and IETF's GSMP extensions with optical switching. These open interfaces enable the separation between the control plane and the optical transport plane. This separation allows flexibility in the network, but it suffers more setup delay than the traditional switch-by-switch connection setup. We propose the parallel interworking model, which will reduce the connection setup delay in the open interface of optical Internet. Based on the switch controller's caching capability about networks states, the parallel interworking procedures between signaling protocol and GSMP protocol are performed in the switch controller. We simulated and evaluated our proposed parallel interworking model and the existing sequential interworking model in terms of a connection setup delay and a completion ratio. We observed that the completion ratios of the two interworking models were quite close. However the connection setup delay of parallel interworking model is improved by about 30% compared with that of the sequential interworking model.