• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.12
• /
• pp.2243-2250
• /
• 2006

When a patient is positioned at insulated bed and practitioner is positioned at insulated floor, that condition could be a cause of lessening effect in acupuncture practice. We investigated how Ground connection and Insulation could influence on the electrical meridian potential between practitioner and patient during acupuncture practice. We treated 30 normal healthy subjects with acupuncture and measured changes in the electrical potential between the stomach meridian points ST-39 and ST-37 in response to light touch after insertion of a needle at ST-36. At first, we stimulated non-insulated needle and measured electrical potentials for non ground, patient ground only, practitioner ground only, all ground respectively. Then we used insulated needles and measured same as above. Non-insulated all ground subject elicited positive mean potential $44.6{\pm}19.2{\mu}V$ and showed $181.4{\pm}59.7{\mu}V$ peak to peak potential. Practitioner ground only showed negative mean potential of $51.5{\pm}9.3{\mu}V$ and $367.4{\pm}27.8{\mu}V$ of peak to peak potential. Patient ground only revealed no mean potential of $2.9{\pm}1.3{\mu}V$, $16.4{\pm}11.9{\mu}V$ of peak to peak potential. All ground showed no mean potential of $1.6{\pm}0.7{\mu}V$, $3.3{\pm}1.9{\mu}V$ of peak to peak potential. In case of Insulated condition, there elicited no mean potential. Non ground and Practitioner only showed weak value of peak to peak potential as $7.8{\pm}2.6{\mu}V$ and $8.4{\pm}2.5{\mu}V$ each. But patient only and all ground showed no potential as $4.7{\pm}2.2{\mu}V$, $3.4{\pm}2.2{\mu}V$, respectively. Therefore, Ground connection modulate the energy transfer course between practitioner and patient. Insulation block energy transfer but static electrical impulse between practitioner and patient.

• The Journal of Korean Association of Computer Education
• /
• v.6 no.2
• /
• pp.41-51
• /
• 2003

In the distance education systems, there are limited things while performing educational activities because there are to be problems in structural features of the Web. HTTP, a connection-less protocol, performs requests of client, however, does not hold on the status. Thus, by features of the Web, it is difficult to hold on the connection of learners and trace information asked by learners. Moreover, these problems make impossible not only a learner's connection continuity but also on-line interaction among the learners in the distance education. This thesis developed CHTP, an connection-based hypertext transfer protocol, based on HTTP and a new platform of distance education in order to track activities of learners. The developed web extension platform will make it easy to build up system for being helpful in a distance education because this thesis proposes a standardized way in the protocol.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.1033-1036
• /
• 1999

In storage technology it is desirable to have greater storage capacity at lower costs. Data compression addresses these demands by reducing the amount of data that must be stored to a given size of media, thus lowering the cost of that storage device. In data compressions it is desirable to have faster transfer rates at lower costs. Data compression addresses these demands by reducing the amounts of data that must be transferred over a media with a fixed bandwidth, thus reducing the connection the. Data compression also reduces the media bandwidth required to transfer a fixed amount of data with a fixed quality of service, thus reducing the costs on this service.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.9
• /
• pp.2948-2957
• /
• 2000

A broadband access network in B- ISDN subscriber network, plays a role of concentration or multiplexing of various subscribers into a service node. To establish an end-to-end ATM connection, interworking functions between \'B5.2 interface's connection protocol and the signalling protocol, are perfonned at the service node. A sequential interworking model and a parallel interworking model were proposed for these interworking functions. The sequential interworking model proceeds the signalling protocol of network node after the response of VB5.2 interface protocol. On the other hand, the parallel interworking model proceeds the signalling protocol and the VB5.2 interface protocol simultaneously. In this paper, we analyze and simulate above two interworking models in tenns of a connection setup delay and completion ratio, when call requests with eBR and VBR transfer capability arrive at the service node. We observed that the completion ratios of the two interworking models are quite closed. However the connection setup delay of parallel interworking model is improved by about 33% compared with that of the sequential interworking model.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.553-556
• /
• 2013

Currently green growth and energy saving are major issues and solution using low-power LED lighting devices are gaining popularity. There are a few standards to control these LED lighting equipment and DMX512 protocol is a typical communication control standard used. DMX512 lighting control protocol is one of standard protocols widely used in various fields which include mainly stage lighting and landscape lighting. But in DMX512 protocol, line is to be connected to a wired connection. Advantage of wired connection is stable data transfer operation but it adds complexity and certain constraints as well in wired connection. To solve this problem, wired connection can be replaced efficiently with a wireless connection but for wireless, problem of data loss and two way communications arises. In this paper, these problems of wireless communication for DMX512 have been addressed and solutions for two way communications and data loss problem have been proposed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.05a
• /
• pp.132-137
• /
• 1998

In this paper, conventional STM(Synchronous Transfer Mode) supports another traffics by using idle channels Proposed mobile terminals are distributed independently at the BSA(Basic Service Area). So, MAC(Medium Access Control) specified on the wireless ATM networks, which is managing statistics multiplexing functions, idle channel's utilization is maximized and multimedia service characteristic for conventional wired networks based fixed assignment scheme(connection-oriented) and random assignment scheme(connectionless) improving on dynamic reservation based MAC protocol.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.6
• /
• pp.793-799
• /
• 2023

This study classifies the types of urban railway stations that reflect the location characteristics of urban railway stations, the structure and form of station taxes, and the number of users, and the level of inconvenience in the transfer movement line for users by station type, the number and connectivity of transfer information, and the level of transfer convenience facilities. The number of installations, conflicts between users, and transfer information signs were analyzed. As a result of data analysis, it was found that the factors that cause the most inconvenience to urban rail users when transferring are the length and curvature of the transfer line, pedestrian density and number of passengers in the transfer passage, presence or absence of transportation convenience facilities, and the size and height of transfer information letters. These transfer inconveniences were objectified, quantified, and presented as evaluation indicators that can measure the transfer convenience of urban railway stations. Additionally, an evaluation scale was developed to measure the service level for each evaluation indicator. The evaluation scale for each indicator presented six levels by applying linear interpolation based on the maximum and minimum values of data derived through field surveys. However, it is judged that a comprehensive evaluation of transfer convenience that combines the importance and weight of each convenience evaluation indicator should be established through future research.

• Journal of Advanced Navigation Technology
• /
• v.9 no.1
• /
• pp.61-69
• /
• 2005

TCP and UDP is a transport layer protocol of Internet. TCP is a connection oriented protocol which supports a reliable data transfer by offering error and flow control, but it bring a transmission delay. On the other hand, the UDP is a connectionless protocol which does not carry out error and flow control, but it guarantees a realtime transmission. There are hardly any protocols which supports not only realtime functions but also data reliability. In this paper, we have designed and implemented a new TCP mode option which supports reliable realtime transmission. Our designed TCP performs an error recovery process during a fixed amount of time. This time is negotiated during the connection establishment phase. Our designed TCP is tested in real environments, and we find that it is relatively faster than the standard TCP and more reliable than the UDP. It can be used for the reliable transfer of realtime multimedia data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.77-80
• /
• 2017

One of the fundamental limits of Bluetooth Low Energy(BLE) is that the data transmission is available via singlehop connection. In this research, we suggested the stable multihop transmission method to overcome this limitation. In multihop connection situation, multiple singlehop connection should be made and disconnected dynamically. Therefore, we stored the data within the GATT layer and tried to send it dynamically. We divided whole process as 4 states, and let each nodes transfers around each states to make data connection safely. Also, we set the transfer policy between each states during the transmission to make a robust system. From the experiment in real-time environment, we proved that our method showed high rate of packet delivery in a multihop network, which consists of more than 3 nodes.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.10 s.352
• /
• pp.34-44
• /
• 2006

A system-on-a-chip (SoC) design uses pre-verified IP hardware blocks in order to reduce design time. We need interface circuits to connect IPs with different protocols. In SoC design we should design interface circuits frequently and these tasks are somewhat time-consuming and error-prone. So it is necessary to generate the interface circuits automatically. Several studies have been made on generating interface circuits only from the communication protocols of IPs. With existing approaches, it is not easy to generate interface circuits connecting two IPs only from communication protocols: connection between IP with address and W without address, connection between IP with only one port to transfer address/data and IP with different ports for address and data connection between IP that transfer address and data together and IP that transfer only one address with a number of data in a burst. No consideration of various characteristics of IPs and no changed algorithm are responsible for it. In order to solve this problem, the proposed approach categorizes communication protocols of IPs, and takes characteristics matching of IPs into account during the interface synthesis. In experiments, we show that we could correctly generate and verify interface circuits for IPs with different characteristics.