• Journal of Platform Technology
• /
• v.8 no.2
• /
• pp.32-43
• /
• 2020

The Unmanned Aerial Vehicle(UAV) system has been mainly used for military domains, but it also widely applied to used in the civilian domains. In civilian domains, low-cost and small-sized UAV systems are mainly applied in various industries. The software that operates UAV systems has a lot of common functions. However, even though there are many common functionalities of the software, changing the devices may cause a problem requiring software modification. These problems degrade interoperability, modularity and portability in UAV systems. In order to solve the problems, an Open System Architecture(OSA) has been proposed. In this paper, we propose a UAV system software architecture based on Future Airborne Capability Environment(FACE) standard. Our system can support UAV systems of various platforms in the civilian domains, which is supplied in small quantity batch production. And it has the advantages of software consolidation and portability. Finally, We describe the development and conformant methodology of the software based on the FACE standard using open development tools.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.4
• /
• pp.295-301
• /
• 2011

A triple-band transceiver module for 2.3/2.5/3.5 GHz mobile WiMAX, IEEE 802.16e, applications is introduced. The suggested transceiver module consists of RFIC, reconfigurable/multi-resonance MIMO antenna, embedded PCB, mobile WiMAX base band, memory and channel selection front-end module. The RFIC is fabricated in $0.13{\mu}m$ RF CMOS process and has 3.5 dB noise figure(NF) of receiver and 1 dBm maximum power of transmitter with 68-pin QFN package, $8{\times}8\;mm^2$ area. The area reduction of transceiver module is achieved by using embedded PCB which decreases area by 9% of the area of transceiver module with normal PCB. The developed triple-band mobile WiMAX transceiver module is tested by performing radio conformance test(RCT) and measuring carrier to interference plus noise ratio (CINR) and received signal strength indication (RSSI) in each 2.3/2.5/3.5 GHz frequency.

• Structural Engineering and Mechanics
• /
• v.68 no.6
• /
• pp.721-733
• /
• 2018

The modal frequency responses of functionally graded (FG) sandwich doubly curved shell panels are investigated using a higher-order finite element formulation. The system of equations of the panel structure derived using Hamilton's principle for the evaluation of natural frequencies. The present shell panel model is discretised using the isoparametric Lagrangian element (nine nodes and nine degrees of freedom per node). An in-house MATLAB code is prepared using higher-order kinematics in association with the finite element scheme for the calculation of modal values. The stability of the opted numerical vibration frequency solutions for the various shell geometries i.e., single and doubly curved FG sandwich structure are proven via the convergence test. Further, close conformance of the finite element frequency solutions for the FG sandwich structures is found when compared with the published theoretical predictions (numerical, analytical and 3D elasticity solutions). Subsequently, appropriate numerical examples are solved pertaining to various design factors (curvature ratio, core-face thickness ratio, aspect ratio, support conditions, power-law index and sandwich symmetry type) those have the significant influence on the free vibration modal data of the FG sandwich curved structure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.124-130
• /
• 2007

RFID technology is considered as a promising solution to increase efficiency of port logistics. Especially active RFID technology, such as e-Seal for container security, is receiving attention nowadays. If active RFID system is combined with passive RFID and legacy bar-code system overall efficiency of port logistics can be improved However, due to the device dependent control interface of RFID readers, there are many difficulties in making active-passive combined RFID system environment. In this paper, we introduce Smart Reader Interface (SRI) system, which provides a device independent RFID reader interrace to control different kinds of RFID readers by hiding device dependent control interface through adapter architecture which is similar to device driver of conventional operating systems. The key design objectives of SRI are the followings; conformance to the related standard. efficiency in processing, easy addition of an adapter for a new RFID reader. Actually, the implemented SRI system can support various kinds of commercial RFID readers, and through the test carried out not only in laboratory but also in the container terminal in the GwangYang Port, its practicality is verified.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.6
• /
• pp.713-720
• /
• 2015

As the hand-held mobile devices are widely used, they are recently coming into convergence with medical diagnostic systems. Furthermore, the wireless mobile Internet and the various kinds of communication devices are rapidly coming into wide use converging with medical technology. The mobile communication environments can make people get more health care services beyond space and time. In this paper, we implement and evaluate the mobile client and the medical diagnostic information server for transmitting, searching and updating the medical diagnostic information. The DICOM CT image and the compressed JPEG 2000 CT image are statistically evaluated by t-test performance whether those images are clinically appropriate. In the case of the DICOM CT image, we realize that the average value is relatively more appropriate to the clinical diagnosis than the JPEG 2000 CT image.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.2
• /
• pp.121-133
• /
• 2017

Technical regulations in the spatial information domain have been developed by a variety of independent organizations and raised inconsistent and overlapping problems with spatial information standards. Many research projects have been done to solve these problems but due to the difficulty of changing or modifying existing administrative regulations, almost nothing has happened for the harmonization. As a response to the fundamental problem, KATS (Korean Agency for Technology and Standards) recently switched the existing system to "trans- governmental participatory standard operation system" and the administrative change created an independent and consistent standard system in the Ministry of Land, Infrastructure and Transport. The Ministry, as a part of the effort, established its own KSDI(Korean Spatial Data Infrastructure) Standard system. From this context this paper presents a redefinition of technical regulation for the harmonization with spatial information standards, an association model between the standards and regulations, and a maintenance methodology to solve the fore-mentioned problems.

• The KIPS Transactions:PartC
• /
• v.13C no.5 s.108
• /
• pp.641-650
• /
• 2006

There has been a continued increase in the complexity of software equipped with wireless mobile devices, due to the introduction of new device functionality and services via network connection. The increasement expected to be accelerated by convergence of telecommunication and broadcasting, and proliferation of telematics and home networking services using wireless mobile devices. The higher the complexity of mobile device software, the higher the necessity of management for the software. As for the global standard of mobile device management technology, OMA DM has been widely adopted by device manufacture and expected to be accelerated its adoption. In this paper, we present a development result of mobile device software release management system ThinkSync DM SoftMan. The implementation details of ThinkSync DM SoftMan are provided in implementation architecture and its working scenario based on the design of ThinkSync DM SoftMan that is summarized in this paper as our previous work. The conformance and performance test of the system are presented.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.7
• /
• pp.171-179
• /
• 2002

STEP-NC is the next generation CNC controller taking STEP-based data model as the interface scheme (or language) between CAM and CNC, and carrying out various intelligent functions. At the moment, efforts are being made worldwide to establish international standard for the new interface scheme formalized as ISO14649. As the new language is being established, increasing attention is being paid to the development of the new CNC. Korea STEP-NC is an integrated STEP-NC system taking ISO 14649 as an input, and carrying out various intelligent functions. It is composed of 5 modules: 1) Shop Floor Programming System (PosSFP), 2) Tool Path Generator (PosTPG), 3) Tool Path Viewer (PosTPV), 4) Man Machine Interface (PosMMI), and 5) CNC Kernel (PosCNC). Distinguished from other prototypes (of Europe and USA), the Korea STEP-NC is top-down designed, and bottom-up implemented comprehensively incorporating all the crucial components for realizing the full benefit of STEP-NC paradigm, without using any existing commercial CAD/CAM systems and CNC kernels. The Korea STEP-NC prototype was successfully demonstrated and evaluated in the ISO conventions Together with prototypes of Europe and USA, Korea STEP-NC will be used as a reference system fur the Triangular Conformance Test to be jointly carried out by ISO TC184 SC1, SC4, and IMS Project.

• The Journal of the Korea Contents Association
• /
• v.19 no.10
• /
• pp.511-521
• /
• 2019

This study is designed to define the smart city as the platform for digital social innovation, and acquire the evaluation indicator for objectively diagnosing domestic cities from the perspective of the implementation process and capability of smart city and analyze its importance. Through prior studies and in-depth interview with experts, candidate groups for evaluation indicators were acquired and the conformance test(T-test) was conducted to finally select 16 detailed indicators in 4 fields. The importance of the evaluation item was found to be high in the policy and system, followed by innovation infrastructure, citizen's participation and infrastructure. The analysis of the 16 detailed indicators for importance showed that the willingness of conducting the smart city by the head of local government, construction of organization dedicated to the smart city have the highest importance. This may reflect the fact that in domestic cities, the smart city is sponsored by public organizations. The analysis of the importance of expert groups (local government and Private sector groups) found that both groups recognized that politics and systems are important factors but they varied in the recognition of importance in the innovation infrastructure and citizen's participation. This study has implication as the indicator for smart city from the perspective of digital social innovation can be acquired for use of the domestic cities and that it can give basic and objective data for the priority of policies on which the domestic smart cities shall focus.

• Journal of the Korean Magnetics Society
• /
• v.26 no.6
• /
• pp.219-225
• /
• 2016

In this study, for assessment of degenerative knee joint cartilage disease we acquired images by fat suppressed 3D spoiled gradient recalled (SPGR) and fat suppressed 3D $T2^*$ weighted imaging techniques. To do a quantitative evaluation, the knee joint cartilage was divided into medial femoral cartilage (MFC), medial tibial cartilage (MTC), lateral femoral cartilage (LFC), lateral femoral cartilage (LFC) and patella cartilage (Pat) to measure their respective signal intensity values, signal-to-noise ratio, and contrast-to-noise ratio. As for the measured values, statistical significance between two techniques was verified by using Mann-Whitney U-Test. To do a qualitative evaluation, two radiologists have examined images by techniques after which image artifact, cartilage surface, tissue contrast, and depiction of lesion distinguishing were evaluated based on 4-point scaling (1: bad, 2: appropriate, 3: good, 4: excellent), and based on the result, statistical significance was verified by using Kappa-value Test. 3.0T MR system and HD T/R 8ch knee array coil were used to acquire images. As a result of a quantitative analysis, based on SNR values measured by using two imaging techniques, MFC, LFC, LTC, and Pat showed statistical significance (p < 0.05), but MTC did not (p > 0.05). As a result of verifying statistical significance for measured CNR value, MFC, LFC, and Pat showed statistical significance (p < 0.05), while MTC and LTC did not show statistical significance (p > 0.05). As a result of a qualitative analysis, by comparing mean values for evaluated image items, 3D $T2^*$ weighted Image has indicated a slightly higher value. As for conformance verification between the two observers by using Kappa-value test, all evaluated items have indicated statistically significant results (p < 0.05). 3D $T2^*$ weighted technique holds a clinical value equal to or superior to 3D SPGR technique with respect to evaluating images, such as distinguishing knee joint cartilages, comparing nearby tissues contrast, and distinguishing lesions.