• 전자공학회논문지A
• /
• 제29A권8호
• /
• pp.41-48
• /
• 1992

The characteristics of traveling-wave electrodes for high-frequency electroptic integrated devices are described from the view point of improvement of phase-matching based on the conformal mapping method. Specific calculations of the characteristic impedance, effective microwave index, and eletrode loss for asymmetric coplanar strip(ACPS) and coplanar waveguide(CPW) electrode structures are presented as a function of the geometric electrode parameters including the electrode thickness and buffer layer thickness. 5-10(x10S0-6Tm) thick Au-ACPS electrodes were successfully fabricated by electroplating and ECR etcher. The improvement of modulation bandwidth can be theoretically observed from the combination of electrode and buffer layer thickness.

• Journal of applied mathematics & informatics
• /
• 제15권1_2호
• /
• pp.173-184
• /
• 2004

In this paper, we find the approximate solution of a second order nonlinear partial differential equation on a simple connected region in $R^2$. We transfer this problem to a new problem of second order nonlinear partial differential equation on a rectangle. Then, we transformed the later one to an equivalent optimization problem. Then we consider the optimization problem as a distributed parameter system with artificial controls. Finally, by using the theory of measure, we obtain the approximate solution of the original problem. In this paper also the global error in $L_1$ is controlled.

• ETRI Journal
• /
• 제34권5호
• /
• pp.696-705
• /
• 2012

Accurate synthesis models based on artificial neural networks (ANNs) are proposed to directly obtain the physical dimensions of an asymmetric coplanar waveguide with conductor backing and substrate overlaying (ACPWCBSO). First, the ACPWCBSO is analyzed with the conformal mapping technique (CMT) to obtain the training data. Then, a modified genetic-algorithm-Levenberg-Marquardt (GA-LM) algorithm is adopted to train ANNs. In the algorithm, the maximal relative error (MRE) is used as the fitness function of the chromosomes to guarantee that the MRE is small, while the mean square error is used as the error function in LM training to ensure that the average relative error is small. The MRE of ANNs trained with the modified GA-LM algorithm is less than 8.1%, which is smaller than those trained with the existing GA-LM algorithm and the LM algorithm (greater than 15%). Lastly, the ANN synthesis models are validated by the CMT analysis, electromagnetic simulation, and measurements.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1273-1274
• /
• 2015

본 논문에서는 주파수 무관(frequency independence) 특성을 갖는 자기상보 구조(self-complementary structure)로 된 안테나의 급전선로(feed line)로 사용할 수 있는 초광대역 발룬(ultra-wideband balun)을 제안하였다. 발룬을 설계하기 위해 클로펜스타인 테이퍼(Klopfenstein taper)를 사용하여 임피던스 프로파일(impedance profile)을 구하고 이를 평행 스트립 선로(parallel strip line) 구조로 구현하기 위해 등각사상방법(conformal mapping method)을 이용했다. 설계한 발룬을 직접 제작하여 측정한 결과, 대역폭은 반사손실 -10 dB를 기준으로 할 때 0.45~10.53 GHz까지 10.08 GHz로 나타나, UHF(ultra high frequency) 통신대역에서 UWB(ultra-wideband) 통신대역에 이르기까지 매우 넓은 주파수 범위에서 자기상보형 안테나의 입력 임피던스 $188{\Omega}$을 $50{\Omega}$의 특성 임피던스에 정합시킬 수 있음을 확인하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 추계 학술대회논문집
• /
• pp.139-144
• /
• 1999

There have been many studies for heat transfer enhancement. Particularly, the study of flow in heat exchangers which have fin device has been main theme in heat transfer area. Practically, the circular tube which has internal fins is widely used for developing heat transfer rate. In this study, flow and heat transfer analysis of the circular tube with fins are investigated. The height and the number of fins are arbitrary. The flow field is assumed to be laminar. The conformal mapping is used for analytic solution of the laminar flow field. Discretization of governing equation, namely, FDM was used for numerical analysis. The velocity field, flow rate and shear stress are calculated for some numbers of fins in circular tube and for some heights of fin. Temperature fields are plotted along the tube length. It can be shown that the numerical solution agrees with the analytical solution.

• 대한의용생체공학회:의공학회지
• /
• 제5권2호
• /
• pp.161-166
• /
• 1984

In this paper, we describe an effective technique for computing the steady-state motion in a two-dimensional cochlear model. With the cochlear fluid assumed incompressible and invisid, the problem reduces to solving an integral equation for a region with yielding boundary. Using the conformal mapping, Jacobian elliptic function and hyperbolic function, a pair of second-order differential equation is derived. What we will show in this paper is that by appropriately transforming integral equation, the same computation can be performed with comparable accuracy in a short time.

• 한국광학회지
• /
• 제13권6호
• /
• pp.473-478
• /
• 2002

원형으로 굽은 평판 광도파로를 직선 광도파로로 등각사상화 시켰다. 단조 증가하는 굴절률 분포를 갖는 바깥쪽 클래드영역의 누설모드를 표현하기 위해 진행파형 수정된 Airy함수가 처음으로 소개되었다. 모의 전산을 통해 유도된 방법에 의한 굽음손실 및 field해 분포를 계산하고, WKB에 의한 결과와 비교하였다. 모의 전산결과 기존의 WKB 방법에 비해 회기점에서 수렴하는 해를 구할 수 있었으며, 더 정확한 굽음 손실을 계산할 수 있었다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권1호
• /
• pp.25-40
• /
• 2015

Understanding the effects of the parameters affecting the interaction of tandem hydrofoil system is a crucial subject in order to fully comprehend the aero/hydrodynamics of any vehicle moving inside a fluid. This study covers a parametric study on tandem hydrofoil interaction in both potential and viscous fluids using iterative Boundary Element Method (BEM) and RANSE. BEM allows a quick estimation of the flow around bodies and may be used for practical purposes to assess the interaction inside the fluid. The produced results are verified by conformal mapping and Finite Volume Method (FVM). RANSE is used for viscous flow conditions to assess the effects of viscosity compared to the inviscid solutions proposed by BEM. Six different parameters are investigated and they are the effects of distance, thickness, angle of attack, chord length, aspect ratio and tapered wings. A generalized 2-D code is developed implementing the iterative procedure and is adapted to generate results. Effects of free surface and cavitation are ignored. It is believed that the present work will provide insight into the parametric interference between hydrofoils inside the fluid.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.282-285
• /
• 1999

Fabrication and pakaging method for low delve voltage and 10Gbps Ti diffused waveguide LiNbO$_3$ optical intensity modulator are described. Optical waveguides were prepared by conventionaly electron-beam evaporation and Ti-indiffusion into Z-cut plate LiNbO$_3$. Traveling-wave electrodes were used for obtaining the wideband frequency response and impedance matching. Microwave effective index and characteristic impedance measured by time domain reflectometry and compared with the calculated value by conformal mapping. The characteristics of 10Gbps modulator at the 1550nm wavelength are as follows : perfect modulation voltage Is about 5V, optical insertion loss Is about 5dB, 3-dB bandwidth is 10GHz, and characteristic impedance is about 50$\Omega$.

• 대한설비공학회지:설비저널
• /
• 제7권3호
• /
• pp.160-166
• /
• 1978

온돌 난방계통에서 지면을 통한 열손실을 수학적으로 등각사상과 변수변환방법을 사용하여 해석하였다. 2차원 및 3차원 해석 결과를 얻었다. 난방되는 주택은 직사각형이라고 가정하였다. 그림 2를 사용하여 평균 지면 열손실을 구할 수 있다. 열 특성치가 열 손실에 미치는 효과에 대하여 설명되었다. 열손실을 구하는 수치적 보기를 주었다.