• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.187-190
• /
• 2007

The objective of this paper is to investigate into the development of injection mould with high cooling characteristics using a direct metal RP technology. In order to manufacture the injection mould with a high cooling rate, three-dimensional conformal cooling channels have been generated in the mould. DMT process, which is one of direct metal RP technologies, has been utilized to directly manufacture the metallic mould with three-dimensional conformal cooling channels. In order to examine the performance of the designed mould, injection molding tests have been carried out. The results of the experiments have been shown that a cooling time and the injection time of the proposed mould are reduced by the factor of five and two times in comparison with the injection mould with linear cooling channels.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.631-636
• /
• 2009

This paper presents design and analysis of ultrasonic vibrator featuring the piezoelectric actuator. After describing a geometric configuration of the proposed vibrator, an analytical model of the ultrasonic vibrator is formulated by adopting liquid film pattern theory and wave theory. The dynamic analysis and geometric optimization are then undertaken using a software ANSYS. The optimization is performed by taking the amplitude of the tip displacement as an objective function. The fluid flow characteristics of the proposed vibrator are analyzed by taking three different fluids: water, silicon oil and ethylene-glycol. This is achieved using a software FLUENT.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.280.2-280.2
• /
• 2016

The graphene, a single atomic sheet of graphite, has attracted tremendous interest owing to its novel properties including high intrinsic mobility, optical transparency and flexibility. However, for more diverse application of graphene devices, it is essential to tune its transport behavior by shifting Dirac Point (DP) of graphene. So, in the following context, we suggest a method to tune structural and electronic properties of graphene using atomic layer deposition. By atomic layer deposition of zinc oxide (ZnO) on graphene using 4-mercaptophenol as linker, we can fabricate n-doped graphene. Through ${\pi}-{\pi}$ stacking between chemically inert graphene and 4-mercaptophenol, conformal deposition of ZnO on graphene was enabled. The electron mobility of graphene TFT increased more than 3 times without considerably decreasing the hole mobility, compared to the pristine graphene. Also, it has high air stability. This ZnO doping method by atomic layer deposition can be applicable to large scale array of CVD graphene TFT.

• 대한기계학회논문집A
• /
• 제23권6호
• /
• pp.1018-1025
• /
• 1999

For the effective analysis of two dimensional plane problems with geometrical discontinuities, singular finite element has been proposed. The element matrix equation was formulated on the basis of hybrid variational principle and Trefftz function sets derived consistently from the complex theory of plane elasticity by introducing a conformal mapping function. In order to suggest the accuracy characteristics of the proposed singular finite element, typical plane problems were analyzed and these results were compared with exact solutions. The singular finite element gives the comparatively exact values of stress concentration factors or stress intensity factors and can be effectively used for the analysis of mechanical structures containing various geometrical discontinuities.

• 한국의학물리학회지:의학물리
• /
• 제5권2호
• /
• pp.49-55
• /
• 1994

Conformal therapy를 위해 필수적이라 할 수 있는 Multileaf collimator(MLC)는 기존의 cerrobend에 의해 형성되는 선량 분포에 비해 leaf 폭의 제한 때문에 조사면의 경계 부분의 반그림자를 증가시키는 결과를 초래한다. 이러한 scallop penumbra의 변화를 알아보기 위해 본 연구에서는 MLC에 의해 형성되는 모양의 field를 cerrobend 블럭을 이용하여 제작, 다양한 형태의 field 모양에 따른 기존의 블럭과 MLC블럭에 의한 penumbra의 차이를 비교해 보고 이를 통해 임상적으로 사용 가능한 최적의 leaf 폭을 찾아내었다. MLC 제작시의 비용을 고려할 때 leaf 폭이 8 mm가 적당함을 알 수 있었다.

• 대한수학회보
• /
• 제42권1호
• /
• pp.5-15
• /
• 2005

The conharmonic transformation is a conformal trans-formation which satisfies a specified differential equation. Such a transformation was defined by Y. Ishii and we have generalized his results. Twisted product space is a generalized warped product space with a warping function defined on a whole space. In this paper, we partially classified the twisted product space and obtain a sufficient condition for a twisted product space to be locally Riemannian products.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2017년도 춘계학술발표대회
• /
• pp.106-108
• /
• 2017

본 논문에서는 휘어지거나 굴곡진 array인 3차원 conformal array의 beam pattern을 보정하고자 기존의 2차원에서 3차원으로 확장한 interpolation technique과 compressive sensing을 이용하여 3-D uniform rectangular array(3-D URA)에 적용하는 방법을 연구하였다. 시뮬레이션 결과는 compressive sensing이 interpolation technique보다 우수한 특성을 보여준다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1243-1248
• /
• 2007

In recent, rapid manufacturing (RM) technology is widely used to develop an injection mould with a high performance. The objective of this paper is to develop the injection mould with a high productivity using a hybrid RM technology combining Laser-aided Direct Metal Tooling process with a machining process. The geometry decomposition has been utilized to improve the speed of the manufacturing for the mould. Mould with conformal cooling channels has been designed to improve cooling characteristics. Several experiments have been carried out to evaluate characteristics of the mould manufactured from the hybrid RM technology. In addition, injection molding tests have been performed to examine the performance of the manufactured mould. The results of the injection molding tests have been shown that a cooling time and the injection time of the designed mould are reduced to one-fifth and one-second that of the mould with convention cooling channels.

• 대한수학회논문집
• /
• 제11권3호
• /
• pp.665-672
• /
• 1996

Let U denote the set of all Schwarzian derivatives $S_f$ of conformal function f in the unit disk D. We show that if $S_f$ is a local extreme point of U, then f cannot omit an open set. We also show that if $S_f \in U$ is an extreme point of the closed convex hull $\bar{co}U$ of U, then f cannot omit a set of positive area. The proof of this uses Nguyen's theorem.

• 대한수학회보
• /
• 제48권4호
• /
• pp.769-777
• /
• 2011

It was obtained in [5] generalized Lichnerowicz and Obata theorems for Riemannian foliations, which reduce to the results on Riemannian manifolds for the point foliations. Recently in [3], they studied a generalized Obata theorem for Riemannian foliations admitting transversal conformal fields. Each transversal conformal field is a ${\lambda}$-automorphism with ${\lambda}=1-{\frac{2}{q}}$ in the sense of [8]. In the present paper, we extend certain results established in [3] and study Riemannian foliations admitting ${\lambda}$-automorphisms with ${\lambda}{\geq}1-{\frac{2}{q}}$.