• 대한수의학회지
• /
• 제38권4호
• /
• pp.818-822
• /
• 1998

The persistence of porcine epidemic diarrhea virus(PEDV) infection was demonstrated in 7 swine farms employing continuous pig flow management even after seasonal outbreaks. Clinically, sporadic postweaning diarrhea was a major concern in those farms. Subsequently circulatory antibody detection using serum neutralizing test made useful for confirmation of PEDV persistent infections. The persistence of PEDV in the premise might have induced recurrence over the period of time.

• 한국재난정보학회 논문집
• /
• 제4권1호
• /
• pp.138-152
• /
• 2008

The most important factor in the maintenance of chemical industry facilities is related with deterioration and corrosion. Leakage of hazardous materials is likely to occur because the confirmation and maintenance of bottom plates are very difficult while the bottom corrosion of the massive hazmat-storage facilities is most dangerous especially. As a result of the analysis of the corrosion locations, areas, usage condition of 287 hazmat-storage tanks on this syudy, it is concluded that the main external corrosion factors are the inflow of moisture and the materials inducing corrosion in the air such as sodium chloride and the main internal corrosion factors are corrosion react caused by stay of seawater, sulfur and moisture in hazmat for a long time without appropriate discharges. It is anticipated that the corrosion of bottom plates can be restrained effectively by establishing the proper measures for the each corrosion cause.

• Journal of Microbiology and Biotechnology
• /
• 제21권1호
• /
• pp.89-92
• /
• 2011

The routine identification and differentiation of Brucella species is a time-consuming and labor-intensive process, which frequently places personnel at risk of laboratory-acquired infection. Here, we describe the development of a rapid multiplex PCR assay for the confirmation of presumptive Brucella isolates. The assay was able to identify and differentiate major human pathogens, namely B. abortus, B. melitensis, and B. suis, in a single test of less than an hour and a half.

• 대한산업공학회지
• /
• 제20권4호
• /
• pp.181-192
• /
• 1994

In an order-oriented production system such as mold manufacturing, the production starts with an order acceptance, and the production planning is set up according to the accepted order information. Such a work can be done through a dynamic process management system which can reflect shop floor situation dynamically. In this paper, so called the Quick order acceptance evaluation system that can investigate order confirmation quickly, is discussed. When an order is asked, this system must consider the time constraint to determine whether to accept or not, and must be reliable when the determined results are used in the shop floor. For this system, firstly, we simplified the machines by grouping based on their operation capabilities, secondly, we conducted load analysis to calculate available capacities during given periods using heuristic method instead of mathematical algorithm, thirdly, expert can input his experienced knowledge into the system interactively when simulation results don't meet the required due dates. As a case study, we applied this system to an injection mold manufacturing factory.

• 한국항만경제학회지
• /
• 제20권2호
• /
• pp.217-234
• /
• 2004

Information technology has been transforming the relationship between shippers and carriers, but an unresolved question remains: what is the relative importance to shippers of service versus cost benefits of e-logistics solutions? This research develops and empirically tests a model to determine how Internet-based logistical operations in international shipping impact on the relative importance of cost versus service benefits to shippers. Contrary to expectations, results show that shippers perceived cost benefits from well-designed web sites, undoubtedly a consequence of perceptions that multi-function portals with ease of access contributed to savings in time and money. Another result was the confirmation of the positive effects of cargo tracing and bill of lading issuance on service-related factors. Finally, this study draws attention to the need for improvements in on-line booking capabilities and development of a comprehensive common portal; issues that must be addressed for shipping lines to succeed in an increasingly competitive e-logistics market.

• 약학회지
• /
• 제40권2호
• /
• pp.141-148
• /
• 1996

GC/MS analysis of 27 controlled pesticides in herbal drugs was studied. Selected ion monitoring(sim) technique was applied to increase the GC/MS sensitivity. Typical peaks in th e mass spectrum of each pesticides were selected as quantitation, comfirmation or alternate ion. Twenty seven pesticides were divided into five groups according to their retention time and the peaks for SIM were programmed accordingly. The combination of two ionization methods, electron impact(EI)-SIM-MS and negative ion chemical ionization(NCI)-SIM-MS, were well-fitted for the detection, confirmation and quantitation of multiclass residual pesticides in herbal drugs.

• 기술혁신학회지
• /
• 제1권1호
• /
• pp.83-95
• /
• 1998

Although an academic journal has had an important role in the diffusion of knowledge and the confirmation of knowledge advancement, it has revealed several difficulties : long processing time for publishing, uni - directional communication, closed review process etc. But an electronic journal (E-Journal) can solve these problems and add several new advantages such as the multimedia expression of documents, and pre and post publication review. Moreover, it should be noted that an E-Journal is not an alternative medium which simply replaces an existing journal, but a new paradigm for scholarly communication. Although this paper reviews several issues related to E-Journal, the introduction of the concept of universal service and informal document style for flexible communication are noticeable. For effective diffusion of E-Journal, information infrastructures such as high - speed telecommunication networks and digital libraries are urgently needed. Government subsidy as in Great Britain is necessary for E-Journal publishing.

• 대한산업공학회지
• /
• 제39권2호
• /
• pp.135-142
• /
• 2013

In B2B e-Marketplace for free gifts and goods, product-mix recommendation is provided frequently by analysing customer logs and/or performing collaborative and rules-based filtering. This study proposes a new process that encompasses the genetic algorithm and key working processes of B2B e-marketplace based on the previous cooperate client order data. Efficiency and accuracy of the proposed system have been confirmed by cross-confirmation of accumulated data in the e-marketplace. The system can provide better opportunities for manufactures and suppliers to select optimized product-mix without time consuming trials and errors in their B2B e-marketplace networks.

• 한국응용과학기술학회지
• /
• 제26권2호
• /
• pp.151-160
• /
• 2009

At this study, we are developing a possible control system through remote monitoring for fire protection in various chemical factory facilities. It's possible to do real time confirmation of a normal operation presence of the various equipment installed in a chemical factory through the internet network at a fire fighting head office, an area fire department and a chemical factory situation room using this remote monitoring control system. When occurring, abnormal operation is the remote monitoring control system, which can check this immediately and notify the situation room administrator. After it was tested using developed remote monitoring control system, the remote monitoring for which the internet network was used confirmed possible.

• 한국경영과학회지
• /
• 제33권1호
• /
• pp.117-129
• /
• 2008

Make-to-order manufacturers with multiple plants at multiple sites need to have the ability to quickly determine which plant will produce which customer order to meet the due date and minimize the transportation cost from the plants to the customer. Balancing the work loads and minimizing setups and make-span are also of great concern. Solving such scheduling problems usually takes a long time. We propose a new approach, which we call 'preprocessing', for resolving such complex problems. In preprocessing scheme, a 'good' a priori schedule is prepared and maintained using unconfirmed order information. Upon the confirmation of orders. the preprocessed schedule is quickly modified to obtain the final schedule. We present a preprocessing solution algorithm for multi-site constraint scheduling problem (MSCSP) using genetic algorithm; and conduct computational experiments to evaluate the performance of the algorithm.