• International Journal of Aeronautical and Space Sciences
• /
• v.6 no.2
• /
• pp.33-45
• /
• 2005

The 1/9-scale model of a fighter-type configuration was tested in the Micro-Craft 8ft ${\times}$ 12ft wind tunnel facility. An abrupt lift dump was found at a certain range of angle of attack under the pre-scheduled approach configuration. To avoid a probable unsatisfactory flight behavior due to the lift dump, various aerodynamic devices were suggested. Extensive tests applying the cutoff leading edge flaps, boundary layer fences, saw tooth and vortex generators were performed with flow visualization as well as force and moment measurements. Test results showed that the origin of the lift dump was caused by the secondary boundary layer flow separation generated from the strong interaction between wing and flap. Various solutions for avoiding the unfavorable feature were suggested with the merits and demerits.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.133-138
• /
• 1996

For the application of hydrogenated amorphous silicon (a-Si:H) p-i-n structural diode as the alpha particle spectroscopy, the induced charge collection was simulated based on a relevant non-uniform charge generation model. The simulation was accomplished for two extreme cases of the incident direction of alpha particle, p-and n-side, respectively. As expected, for the complete charge collection, the hole collection should be severely considered due to its poor mobility and the full depletion bias required. For the comparison of signal corresponding to the detector configuration or structure, although n-i-p configuration shows a wider range of linearity to the energy, p-i-n configuration is more suitable in the viewpoint of linearity and signal value for the considering energy range.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.1 s.232
• /
• pp.35-45
• /
• 2005

TR-E2 configuration designed by Bell Textron was tested in KARI 1-m wind tunnel. To explore aerodynamic characteristics for the given configuration, a $12\%$ scaled model was fabricated and tested. Wind tunnel test for TR-E2 had been performed by changing the incidence angles of wing and deflection angles of control surfaces. Test result showed that the lower wing incidence angle has more favorable lift to drag ratio compared with original design. Longitudinal and directional characteristics of TR-E2 were found to be stable for the pitch and yaw motions. However, the lateral stability of TR-E2 is not stable for certain control surface deflection.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.4
• /
• pp.105-117
• /
• 1998

In this paper, the general formula of disparity estimation based on Bayesian Maximum A Posteriori (MAP) algorithm is derived and implemented with simplified probabilistic models. The probabilistic models are independence and similarity among the neighboring disparities in the configuration.The formula is the generalized probabilistic diffusion equation based on Bayesian model, and can be implemented into the some different forms corresponding to the probabilistic models in the disparity neighborhood system or configuration. And, we proposed new probabilistic models in order to simplify the joint probability distribution of disparities in the configuration. According to the experimental results, the proposed algorithm outperformed the other ones, such as sum of swuared difference(SSD) based algorithm and Scharstein's method. We canconclude that the derived formular generalizes the probabilistic diffusion based on Bayesian MAP algorithm for disparity estimation, and the propsoed probabilistic models are reasonable and approximate the pure joint probability distribution very well with decreasing the computations to 0.01% of the generalized formula.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.271-275
• /
• 2006

In STP, network performance differs depending on topology configuration. Therefore, we need to configure right topology for the optimal efficiency of networking. This paper suggest the optimal topology configuration for efficient networking between ethernet switchs. It finds out the best topology configuration by calculation mathematical model which uses transmission time between root switch and other switchs in the same domain. And it also analysed performance difference on locations of root switch. Through the performance analysis, we could conclude that placing the root switch in the center is the most efficient.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.1
• /
• pp.34-34
• /
• 1993

The gelation phenomena of N-methylolated PAAm (M-PAAm) in aqueous media was studied. The critical gelation concentration (CGC) was very close to the calculated $C^*$ of the scaling theory. But the CGC of lower MW M-PAAm deviated from $C^*$ due to contamination of small molecules. We propose that the CGC is the close packing configuration of polymer molecules in solution. The experimental results of the gelation of M-PAAm/PAAm mixture proved that the close packing configuration is essential to make a gel. We calculated the minimum quantity of M-PAAm to make M-PAAm/PAAm mixture a gel by using the close packing configuration. We used a lattice model.

• Smart Structures and Systems
• /
• v.30 no.3
• /
• pp.239-243
• /
• 2022

We investigate the influence of nonlinear viscoelastic damping on the response of a cantilever sensor covered by piezoelectric layers in a symmetric or asymmetric configuration. We formulate an initial-boundary-value problem which consistently incorporates both geometric and material nonlinearities including the effect of viscoelastic damping which cannot be ignored for micro- and nano-mechanical sensor operation in a vacuum environment. We employ an asymptotic multiple-scales methodology to yield the system nonlinear frequency response near its primary resonance and employ a model-based estimation procedure to deduce the system damping backone curve from controlled experiments in vacuum. We discuss the effect of nonlinear damping on sensor applications for scanning probe microscopy.

• Journal of Broadcast Engineering
• /
• v.18 no.1
• /
• pp.43-58
• /
• 2013

Richmedia Service means that interactive media service can provide view with various multimedia elements(such as Video, Audio, Text) at same time. Various Multimedia elements can be serviced by Scene Description technology standards like BIFS(Binary Format for Scenes) and LASeR(Light Application Scene Representation). By providing Scene Component information, richmedia service is available to various multimedia services. so users is available to personalized services fitting temporal and spatial options. In conventional technology, when the scene is changed by user or service, mobile deletes the scene of configuration information and makes new scene of configuration information. this is a very inefficient way. In this paper, Propoesed that by using DOM(Document Object Model) method, to pass only the dynamic configuration part, changes scene method.

• Journal of Internet Computing and Services
• /
• v.11 no.4
• /
• pp.107-117
• /
• 2010

The feature models representing the common and variable concepts among the software products and the feature configurations generated by selecting the features to be included in the target product are the essential components in the software product lines methodology. Although the researches on the formal semantics and reasoning of the feature models and feature configurations are in progress, the researches on feature model ontologies and feature configuration validation using the semantic web technologies are yet insufficient. This paper defines the formal semantics of the feature models and proposes a feature configuration validation technique based on ontology and semantic web technologies. OWL(Web Ontology Language), a semantic web standard language, is used to represent the knowledge in the feature models and the feature configurations. SWRL(Semantic Web Rule Language), a semantic web rule languages, is used to define the rules to validate the feature configurations. The approach in this paper provides the formal semantic of the feature models, automates the validation of feature configurations, and enables the application of various semantic web technologies, such as SQWRL.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.7
• /
• pp.127-138
• /
• 2008

Configuration and data management system for weapon system research and development processes should assist concurrent engineering and collaboration activities for various documents, drawings, part informations and product structure informations. In this thesis we defined the system architecture using the CBD methodology and implemented the component based system development process. Most of the configuration and data management systems consist of three layered system architecture which use the general MVC models. In this thesis we defined four layered system architecture based on EJB structure under J2EE environments. Through the four layered system architecture, we break down the general model layer into two detailed business layers and the ordinary control layer into two system dependent layers. With these four layers, we proposed the methodology that detailed the characteristics of the components. Through the CBD approach and the component based development process, we can get the representation model and implement the actual system of the configuration and data management system for weapon system R&D.