• Journal of IKEEE
• /
• v.17 no.2
• /
• pp.168-175
• /
• 2013

The delay times due to the propagating of data on PCB depend on the shape and length of interconnection lines when memory controllers and high speed memories are soldered on the PCB. The dependency on the placement and routing on the PCB requires redesign of I/O logic or reconfiguration of the memory controller after the delay time is measured if the controller is programmable. In this paper, we propose architecture of configuring logic for the delay time estimation by writing and reading test patterns while initializing the memories. The configuration logic writes test patterns to the memory and reads them by changing timing until the correct patterns are read. The timing information is stored and the configuration logic configures the memory controller at the end of initialization. The proposed method enables easy design of systems using PCB by solving the problem of the mismatching caused by the variation of placement and routing of components including memories and memory controllers. The proposed method can be applied to high speed SRAM, DRAM, and flash memory.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.512-514
• /
• 2008

In this paper, a new electromagnetic circuit is proposed for an optical pickup actuator with high sensitivity. Contrary to those of conventional actuators, the proposed circuit has two focusing coils which are diagonally placed at the front and rear of a moving part. The configuration which makes the effective length of the focusing coil longer and the moving part lighter, is helpful in increasing the sensitivity of the actuator. However, the asymmetry of the moving part by two focusing coils causes flexible node vibrations in quite low frequency range. This paper shows that the design modification of the moving part for the reconfiguration of mass moment of inertia can reduce the mode vibrations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.11
• /
• pp.1167-1178
• /
• 1991

In this paper, we review the characteristics of battle field, consider required properties of mobile radio network, and design network control architecture proper to battle field network. Also we design distributed algorithm which constructs network control architecture and transmission schedule. For the information of network connectivity and the immediate reconfiguration caused by failure, loss, or movement of nodes, configuration and transmission schedule, algorithms are to be executed periodically and for entire network reliability, algorithms must to be executed fully distributedly. At the time of loss or failure of primary local control node, we suggest the method which diminishes transmission delay. We explain the operation of network with examples. Finally designed algorithms are verified and analized by computer simulation.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.1
• /
• pp.89-96
• /
• 2015

The various services applied internet have been provided by the rapid development of wireless networks and providing multimedia contents are also increasing. It is caused a number of problems such as increasing of network traffic rapidly. P2P technique is gaining popularity for solving these problems. In particular, P2P technique in a wireless network environment has gained much popularity. Among them, MANET-based P2P techniques has been studied actively. It is not easy to be applied the existing technique as it is due to the dynamic topology and low bandwidth by moving nodes in MANET that is consisted of only mobile nodes. In this paper, we proposed sharing group construction technique for providing a stable connection between mobile nodes and reducing the load of network traffic and overhead of sharing group reconfiguration in order to improve data transmission performance between mobile nodes. The sharing group member nodes applied virtual sharing group generation technique with neighboring nodes of 1-hop distance in order to reduce traffic for file sharing. We performed comparative experiments with DHT technique to evaluate the performance of the proposed technique in this paper and the excellent performance is confirmed through experiments.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.5
• /
• pp.80-87
• /
• 2003

Network reconfiguration in distribution systems is realized by changing the status of sectiona1izing switches, and is usually done for loss minimization or load balancing in the system This parer presents an approach for loss minization in distribution systems using reactive tabu search. Tabu search attempts to determine a better solution in the manner of a greatest-descent algorithm, but it can not give any guarantee for the convergence property. Reactive tabu search can give convergence property by using reaction and escape mechanism. Therefore, it can find global optimal solution regardless of initial system configuration. To demonstrate the validity of the proposed algorithm, numerical calculations are carried out the 32 bus system models.

• Journal of Internet Computing and Services
• /
• v.3 no.1
• /
• pp.91-99
• /
• 2002

Many companies and departments are increasingly concerned of searching their business information in correct and faster way as they share the information through the internet. LDAP has been proposed for directory server standards which supports storing, searching and managing the business information, and it has become a global standard. Current LDAP, however, cannot solve problem; such as server overloads and data synchronization. This paper describes the history and characteristics of LDAP, and proposes an architecture for solving those problem;. Since the proposed architecture is designed based on the existing LDAP architecture, it guarantees extensibility and portability of server configuration.

• Electronics and Telecommunications Trends
• /
• v.35 no.2
• /
• pp.28-37
• /
• 2020

Recently, the focus of research interest in artificial intelligence technology has shifted from algorithm development to application domains. Industrial sectors such as smart manufacturing, transportation, and logistics venture beyond automation to pursue digitalization of sites for intelligence. For example, smart manufacturing is realized by connecting manufacturing sites, autonomous reconfiguration, and optimization of manufacturing systems according to customer requirements to respond promptly to market needs. Currently, KSB Convergence Research Department is developing BeeAI-an on-site end-to-end intelligence platform. BeeAI offers end-to-end service pipeline configuration and DevOps technologies that can produce and provide intelligence services needed on-site. We are hopeful that in future, the BeeAI technology will become the base technology at various sites that require automation and intelligence.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.26-31
• /
• 2011

In this paper, we focused on the loop distribution system to solve the international issues of energy depletion and global warming. The conventional method of reconfiguration of distribution system was moving open points of switches from an actual switch position to another, while an appropriate switch must be opened to preserve the radial structure and this procedure is continued til there is no further loss reduction. However, the loop distribution system is the best optimization method to minimize loss than the other methods which is preserving radial structure. So we analyzed 3 types of loop distribution system upgraded from radial distribution system by changing normally open switch to normally closed switch. The simple 3 types of model system for simulation were composed, and each types of loop system were simulated in accordance with varying parameters. As a result of simulations, the loss reduction was different for each types of loop distribution system and each loop types have constraints for composing loop distribution system. The algorithms propose the method how to construct loop distribution system regarding constraints. Type I that needs least requirements get least loss reduction and Type III that needs most requirements get maximum loss reduction. On the other hand, Type I was most feasible distribution system to be realized.

• International Journal of Safety
• /
• v.10 no.2
• /
• pp.10-15
• /
• 2011

The reconfigurable control systems based on feedback controls are utilized to compensate for damages of actuators in control systems. Such systems have multiple feedback controls and switch them in accordance with the degrees of the failures of the actuators. In order to be able to assess those systems, this paper develops a method to obtain reliabilities of reconfigurable dynamical systems which are interconnected in parallel / series configuration. By calculating reliabilities of interconnected dynamical systems, it is possible to assess many dynamical systems by comparing their reliabilities. Firstly, reliabilities of subsystems are obtained according to the definitions of the failures in terms of robust reliability for each subsystem. Then, the reliability of overall system is calculated from reliabilities of subsystems, using the methodology employed for probabilistic safety assessment. Failure rates of subsystems with feedbacks for reconfiguration change in certain time periods because of the switching of feedback controls. In order to deal with this, combinations of subsystems which compose overall system for each time period are derived by the methodology mentioned above and then integrated to calculate the reliability of overall system for a specific time. An illustrative example shows the validity and details of the proposed method.

• Advances in Computational Design
• /
• v.7 no.3
• /
• pp.189-210
• /
• 2022

Deployable structures have the ability to shift from a compact state to an expanded functional configuration. By extension, reconfigurability is another function that relies on embedded computation and actuators. Linkage-based mechanisms constitute promising systems in the development of deployable and reconfigurable structures with high flexibility and controllability. The present paper investigates the deployment and reconfigurability of modular linkage structures with a pin and a sliding support, the latter connected to a linear motion actuator. An appropriate control sequence consists of stepwise reconfigurations that involve the selective releasing of one intermediate joint in each closed-loop linkage, effectively reducing it to a 1-DOF "effective crank-slider" mechanism. This approach enables low self-weight and reduced energy consumption. A kinematics and finite-element analysis of different linkage systems, in all intermediate reconfiguration steps of a sequence, have been conducted for different lengths and geometrical characteristics of the members, as well as different actuation methods, i.e., direct and cable-driven actuation. The study provides insight into the impact of various structural typological and geometrical factors on the systems' behavior.