• 태양에너지
• /
• 제20권3호
• /
• pp.11-19
• /
• 2000

In this study, the basic data which were required for development of LHSS(latent heat storage system) were experimentally obtained. Experiments were carried out under the following conditions. The initial temperatures of P.C.M. which were used by parameter is $5^{\circ}C,\;9^{\circ}C$ and $14^{\circ}C$. The conditions of working fluid are $-6^{\circ}C,\;-4^{\circ}C$, and $65{\ell}$/min.. The pure water of which the freezing point is $0^{\circ}C$ was filled in the system, and the Ethylene glycol(brine) was circulated through the 10 vertical tubes as a secondary fluid in order to cool the P.C.M. down. The inlet temperature of the secondary fluid and the initial temperature of the water were varied to investigate the effects of the important design parameters. The phenomenons of temperature conversion of P.C.M. were appeared for the conductive heat transfer and free convective heat transfer by buoyancy force in this storage unit system. In order to find the effective water circulation path, we obtained P.CM. temperature distributions of 5 parts in the storage tank during freezing process.

• 한국안전학회지
• /
• 제20권3호
• /
• pp.58-63
• /
• 2005

In this research, silicone rubber with additions of inorganic filler, alumina trihydrate$(Al(OH)_3\;:\;ATH)$, was aged acceleratedly and cyclically by the salt-fog and heating. The optimum amount of ATH addition to silicone rubber have been investigated by measurements of leakage current in the change of electrical properties and tensile strength, %elongation in mechanical properties and FT-IR, TG, SEM in the change of the chemical properties. With regard to un-aged silicone rubber, as the ATH addition amount increases, conductive path formation time was shortened in the electrical properties and tensile strength was increased, %elongation was decreased. In case of identical ATH addition amount, as cyclic aging increases, surface resistivity, tensile strength and %elongation were decreased. Considering the cyclic aging, the most effective amount of ATH addition was about 90phr.

• Design & Manufacturing
• /
• 제16권1호
• /
• pp.1-8
• /
• 2022

The importance of fast and accurate body temperature measurement with a portable thermometer is increasing. In order to reduce the temperature measurement response time of the infrared ear thermometer, it is very important to develop a structure for a thermometer having an efficient heat transfer path. Most of the existing ear thermometers are single structures that do not consider thermal efficiency, which may delay measurement time and reduce measurement accuracy. Therefore, in this study, the upper part of the thermometer in contact with the ear is made of a thermally conductive material, and the lower part of the thermometer is made of a thermal barrier material so that heat can be concentrated on the infrared sensor of the thermometer by blocking the upper part of the heat. For the efficiency of production, it was intended to be manufactured through the double injection process, and for this purpose, in this paper, the optimal process parameters were derived through the double injection process analysis.

• Journal of Electrochemical Science and Technology
• /
• 제12권2호
• /
• pp.285-295
• /
• 2021

The inverse spinel Cobalt ferrite (CoFe₂O₄, CFO) is considered to be a promising alternative to commercial graphite anodes for lithium ion batteries (LIBs). However, the further development of CFO is limited by its unstable structure during battery cycling and low electrical conductivity. In an effort to address the challenge, we construct three-dimensional hierarchical flower-like CFO nanoclusters (CFO NCs)-decorated carbonized cotton carbon fiber (CFO NCs/CCF) composite. This structure is consisted of microfibers and nanoflower cluster composited of CFO nanoparticle, in which CCF can be used as a long-range conductive matrix, while flower-like CFO NCs can provide abundant active sites, large electrode/electrolyte interface, short lithium ion diffusion path, and alleviated structural stress. As anode materials in LIBs, the flower-like CFO NCs/CCF exhibits excellent electrochemical performance. After 100 cycles at a current density of 0.3 A g^-1, the CFO NCs/CCF delivers a discharge/charge capacity of 1008/990 mAh g^-1. Even at a high current density of 15 A g^-1, it still maintains a charge/discharge capacity of 362/361 mAh g^-1.

• 지질공학
• /
• 제3권2호
• /
• pp.125-148
• /
• 1993

암반지하수유동 해석의 복잡성은 열극과 공극간의 유동관계, 응력의 영향, 열극체계의 복잡한 기하학적 분포상태에 기인한다. 열극체계의 불규칙한 발달로 인한 규모종속과 이방성 특성은 지금까지의 해석방법으로는 만족할 만한 결과를 얻을 수 없다. 분리열극망(Discrete Fracture Network) 모델은 암반 지하수가 근본적으로 분리된 열극을 통하여 유동한다는 가정하에서 출발한다. 유동경로(flow path)는 열극의 기하학적 분포 및 상호간의 연결형태에 의하여 결정되며, 열극분펴 및 수리특성은 현장조사자료의 통계학적 처리에 의한 접근방법을 시도하고 있다. 본 모델을 적용한 연구지역은 평택군 포승면 원정리 일대 $1\textrm{km}^2$지역으로서, 열극자료 분석은 등면적투영도로부터 6개의 set를 도출하였으며, 열극의 크기는 lognormal분포를 나타냈다. 6개 열극 set가 차지하는 총투수성열극확률밀도(conductive fracture intensity)는 1.52로 나타났으며, set 1의 투수성열극밀도가 0.37로 가장 높게 나타났다. 지하공동으로으 유입량 계산은 열극투수계량계수를 $10^{-8}\textrm{m}^2/s$으로 하였을 경우, 29ton/일로 산출되며, $10^{-7}\textrm{m}^2/S$로 하였을 때 약 22배가 큰 65ton/일로 계산되었다. 본 모델은 지하공동건설시 부지특성조사나 평가시에 해석도구로 사용될 수 있으며, 정량적인 자료뿐만 아니라 정상적인 자료도 해석 및 평가과정에 응용될 수 있는 반복적인 실행을 통한 Forward 모델링방법을 사용하는 장점이 있다.

• 마이크로전자및패키징학회지
• /
• 제22권1호
• /
• pp.55-61
• /
• 2015

신축성 전극소재는 웨어러블 밴드나 전자피부와 같은 플렉서블 제품으로의 적용 때문에 주목 받고 있다. 플렉서블 소자로서 사용하기 위해선 구부리거나 비틀거나 늘리는 등 물리적 변형에도 전기저항의 증가가 최소화되어야 한다. 카본블랙은 저가의 간단한 공정, 특히 인장 시 비저항의 감소라는 장점 때문에 후보소재로 고려되고 있다. 하지만 카본블랙의 전도도는 전극으로 사용되기에 상대적으로 낮다. 이에 비해 그래핀은 뛰어난 전기전도도 및 유연성 때문에 촉망받고 있는 전자소재이다. 따라서 그래핀을 첨가한 카본블랙은 신축성 전극으로 적합한 소재로 예상된다. 본 논문을 통해 인장 시 그래핀을 첨가한 카본전극의 전기적 특성을 연구하였다. 기계적인 인장은 전극 내의 균열(crack)을 형성시켜 도전경로의 파괴를 일으켰다. 하지만 인장으로 정렬된 그래핀은 카본필러 간의 연결성을 강화하고 도전구조를 유지하였다. 무엇보다도 그래핀 첨가로 인하여 인장 시 카본전극의 전자구조가 변화하여 전자를 효과적으로 전도하게 하였다. 결론적으로 그래핀 첨가를 통해 카본블랙 복합체에 신축성 전극으로의 가능성을 부여하였다.

• 한국화재소방학회논문지
• /
• 제30권6호
• /
• pp.71-77
• /
• 2016

핸드폰 충전기 내 커패시터의 전해액이 전원 입력단자로 누출되고 PCB 기판에 트래킹이 발생하여 탄화도전로가 형성되는 것을 확인하였다. 트래킹이 발생하는 원인을 구조적으로 분석한 결과, 전원 입력단자와 PCB 기판이 커넥터를 이용하여 직결되는 경우에 발생하였다. 커패시터에서 누출된 전해액이 전원입력단자로 흘러 들어가는 양이 많을수록, 전원입력단자의 플러그 핀 사이에 설치된 격벽의 높이가 낮을수록 트래킹 발생율이 높았다. 이에 따라 충전기 내 트래킹 발생율을 낮추기 위해서는 누출된 전해액이 전원입력단자로 흘러 들어가지 않도록 커패시터에 격벽을 설치하거나, 전원입력단자에 설치된 격벽의 높이를 높일 필요가 있다. 또한, 전원 연결단자와 맞닿아 있는 PCB기판의 형태를 ${\Pi}$로 변경한다면 트래킹 발생율이 더욱 줄어들 것으로 판단된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.158-158
• /
• 2009

The electrophoretic deposition(EPD) technique with a wide range of novel applications in the processing of advanced ceramic materials and coatings, has recently gained increasing interest both in academic and industrial sector not only because of the high versatility of its use with different materials and their combinations but also because of its cost-effectiveness requiring simple apparatus. Compared to other advanced shaping techniques, the EPD process is very versatile since it can be modified easily for a specific application. For example, deposition can be made on flat, cylinderical or any other shaped substrate with only minor charge in electrode design and positioning[1]. The synthesis of the nano-sized Ce0.2Sm0.8O1.9(SDC)particles prepared by aurea based low temperature hydrothermal process was investigated in this study[2].When we made the SDC nanoparticles, changed the time of synthesis of the SDC. The SDC nanoparticles were characterized with field-emission scanning electron microscope(FESEM), energy dispersive X-ray analysis(EDX), and X-ray diffraction(XRD). And also we researched the results of our investigation on electrophoretic deposition(EPD) of the SDC particles from its suspension in acetone solution onto a non-conducting NiO-SDC substrate. In principle, it is possible to carry out electrophoretic deposition on non-conducting substrates. In this case, the EPD of SDC particles on a NiO-SDC substrate was made possible through the use of a adequately porous substrate. The continuous pores in the substrates, when saturated with the solvent, helped in establishing a "conductive path" between the electrode and the particles in suspension[3-4]. Deposition rate was found to increase its increasing deposition time and voltage. After annealing the samples $1400^{\circ}C$, we observed that deposited substrate.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.286-287
• /
• 2012

Reset-first resistive switching mechanism based on reduction reaction in HfO2-x with oxygen drift-diffusion was studied. we first report that the indirect evidence of local filamentary conductive path formation in bulk HfO2 film with local TiOx region at Ti top electrode formed during forming process and presence of anion-migration at interface between electrode and HfO2 during resistive switching through high resolution transmission electron microscopy (HRTEM), electron disperse x-ray (EDX), and electron energy loss spectroscopy (EELS) mapping. Based on forming process mechanism, we expected that redox reaction from Ti/HfO2 to TiOx/HfO2-x was responsible for an increase of initial current with increasing the post-annealing process. First-reset resistive switching in above $350^{\circ}C$ annealed Ti/HfO2 film was exhibited and the redox phenomenon from Ti/HfO2 to TiOx/HfO2-x was observed with high angle annular dark field (HAADF) - scanning transmission electron microscopy (STEM), EDX and x-ray photoelectron spectroscopy. Therefore, we demonstrated that the migration of oxygen ions at interface region under external electrical bias contributed to bipolar resistive switching behavior.

• 접착 및 계면
• /
• 제15권4호
• /
• pp.169-173
• /
• 2014

크기가 다른 2가지 SiC 필러를 Nylon 66에 충전하여 용융혼련 시켜 복합재료를 제조하고 필러 크기가 열확산도에 미치는 영향을 고찰하였다. 필러를 충전하지 않은 경우에 비하여 60 vol%의 SiC 필러를 함유한 경우에 복합재료의 열확산도가 10배 이상 증가함을 확인하였고, SiC 필러의 평균크기가 $24{\mu}m$인 고분자복합재료의 열확산도가 $2.2{\times}10^{-2}cm^2/sec$였으나 필러크기가 76{\mu}m$인 경우에는 $1.75{\times}10^{-2}cm^2/sec$로 20% 감소하였다. 필러의 크기가 $24{\mu}m$인 경우에 열전도성 필러와 Nylon 66 매트릭스의 계면 접촉과 필러와 필러 사이의 접촉을 용이하게 하여 포논이 효과적으로 전달되는 것으로 보인다. Nylon 66보다 상대적으로 강직한 구조와 높은 가공온도를 가지는 Nylon 46를 매트릭스로 사용한 Nylon 46/SiC 400 (60 vol%) 복합재료의 열확산도는 $1.61{\times}10^{-2}cm^2/sec$였다.