• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.8 no.3
• /
• pp.54-63
• /
• 1994

In this paper, we fixed to the needle electrode on the plate spacer fabricated the plate electrode of the gap interval 40[mm]and divided into the interval lO[mm]in the gap. When set up the particle and barrier on the material as well as spacer in the each intervaL We investigated that FOV and discharge path to AC, OC positive polarity. The results are as follow. 1) When the barrier is settled on the high potential side and the particle is hidden on the back of barrier, FaV has been increased. 2) When the particle is located on the tip of needle electrode, FaV has been decreased considembly. 3) When the particle is between electrodes. FaV has been decreased because discharge path through the particle.

• Journal of the Korean Ceramic Society
• /
• v.32 no.3
• /
• pp.359-365
• /
• 1995

The grain boundary effect on the ionic conductivity was investigated using a.c. admittance analysis in (Bi2O3)0.715(CaO)0.285 oxygen-ion conducting solid electrolyte. As a separated arc representing grain boundary polarization was not observed in the admittance plane, bulk conductivity was measrued for samples with various grain sizes in the temperature range from 48$0^{\circ}C$ to 72$0^{\circ}C$ and the conductivity distribution between grain interior and grain boundary was determined by the reported analytical methods. In the above temperature range, grain boundary worked as a high conductive path instead of blocking layer and ionic conduction through grain boundary was significant. The activation energy for conduction through grain and grain boundary was 78 and 106 kJ/mol, respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.4
• /
• pp.69-80
• /
• 2000

Generally, die polishing is a lime consuming process, resulting in 30∼50％ of the whole die manufacturing time. However, die polishing has not been automated yet, since it needs a great deal of experience and skill. This paper describes a new development of automated system for die polishing and focuses on the successful achievements of the element techniques to realize from hand skill to automation, as followings: (1) The 5 axes polishing system by the aid of robot with 2 degrees of freedom, is developed for the application of curved surface die. (2) The CAM system realizes a 5 axes tool path control for polishing and measuring. (3) The conductive elastic tool is able to meet curved surfaces of die and gives a high efficient and quality polishing characteristics. (4) The surface roughness measurement device with noncontact laser is developed and has a high reliability without surface damage.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.3
• /
• pp.93-98
• /
• 2017

2-Ethylhexyl acrylate, butyl acrylate, methyl methacrylate, and 2-hydroxyethyl methacrylate were polymerized to synthesize acrylic pressure sensitive adhesive (PSA). Alumina and graphite as a filler were added to acrylic PSA to give thermal conductivity. In case of addition of both graphite and alumina, the thermal conductivity of PSA was increased compared with alumina alone due to enhancement of contact between two fillers followed by increasing thermal path in PSA matrix.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.213-214
• /
• 2022

The purpose of this study is to compare and analyze the effect of the length and volume fraction of smooth steel fiber on the electrical conductivity and shielding effectiveness of cementitious composites. As the length and volume fraction of the fiber increase, the movement of electrons becomes active and the formation of a conductive path becomes advantageous, thereby increasing electrical conductivity. Accordingly, the electrical conductivity and the shielding effectiveness showed a very close relationship. Thereafter, it is judged that research is needed to increase the shielding effect.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.183-184
• /
• 2023

The purpose of this study is to compare and analyze the effect of type and volume fraction of fiber on the electrical conductivity and shielding effectiveness of cementitious composites. The large specific surface area of amorphous metallic fiber, as well as the high number of fibers per unit weight, provided an advantage in the formation of conductive path. As the result, the electrical conductivity of amorphous metallic fiber was evaluated to be higher, and the shielding effectiveness was also higher. However, the shielding effectiveness according to electrical conductivity was confirmed to have a threshold point, and further research is needed to improve it.

• Journal of Adhesion and Interface
• /
• v.10 no.1
• /
• pp.30-34
• /
• 2009

The effect of pressure on the thermal conductivity in two-phase composite system was studied. Thermally conductive polypropylene (PP)/silicon carbide (SiC) composites were prepared by applying various pressures from 0 to 20 MPa. The thermal conductivity of the composite was 1.86 W/mK at 20 MPa, increased by 40% compared to the value of at 0 MPa. It was 9 times higher than that of unfilled polypropylene. It implies the pressure induces the easy path for phonon transport. Also, the experimental values were compared with Maxwell's prediction and Agari's prediction. Agari's prediction gave a better agreement compared to that of Maxwell's prediction due to the consideration of interactions between filler-filler and filler-polymer.

• Korean Journal of Materials Research
• /
• v.30 no.10
• /
• pp.522-532
• /
• 2020

Conductive polymer composites with high electrical and mechanical properties are in demand for bipolar plates of phosphoric acid fuel cells (PAFC). In this study, composites based on natural graphite/fluorinated ethylene propylene (FEP) and different ratios of carbon black are mixed and hot formed into bars. The overall content of natural graphite is replaced by carbon black (0.2 wt% to 3.0 wt%). It is found that the addition of carbon black reduces electrical resistivity and density. The density of composite materials added with carbon black 3.0 wt% is 2.168 g/㎤, which is 0.017 g/㎤ less than that of non-additive composites. In-plane electrical resistivity is 7.68 μΩm and through-plane electrical resistivity is 27.66 μΩm. Compared with non-additive composites, in-plane electrical resistivity decreases by 95.7 % and through-plane decreases by 95.9 %. Also, the bending strength is about 30 % improved when carbon black is added at 2.0 wt% compared to non-additive cases. The decrease of electrical resistivity of composites is estimated to stem from the carbon black, which is a conductive material located between melted FEP and acts a path for electrons; the increasing mechanical properties are estimated to result from carbon black filling up pores in the composites.

• Composites Research
• /
• v.28 no.2
• /
• pp.70-74
• /
• 2015

In this paper, carbon nanotubes (CNTs) and micro glass bubbles (GBs) have been incorporated into a polyamide6 (PA6) matrix to impart thermoelectric properties. The spaces created in the matrix by GBs allows the formation of "segregated" CNT network. The tightly bound CNT network, if controlled properly, can serve as a conductive path for electron transport, while prohibiting phonon transport, which would provide an ideal configuration for thermoelectric applications. The CNTs and GBs were dispersed in a nylon-formic acid solution using horn sonication followed by coagulation in deionized water, and nanocomposite panels were fabricated using a hot press. The performance of nanocomposite panels was evaluated from thermal and electrical conductivities and Seebeck coefficient, and a thermoelectric figure of merit as high as 0.016 was achieved.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.6
• /
• pp.297-301
• /
• 2006

In the present work, we investigate the characteristics of new composition material, chalcogenide $Ge_1Se_1Te_2$ material in order to overcome the problems of conventional PRAM devices. The Tc of $Ge_1Se_1Te_2$ bulk was measured $231.503^{\circ}C$ with DSC analysis. For static DC test mode, at low voltage, two different resistances are observed. depending on the crystalline state of the phase-change resistor. In the first sweep, the as-deposited amorphous $Ge_1Se_1Te_2$ showed very high resistance. However when it reached the threshold voltage(about 11.8 V), the electrical resistance of device was drastically reduced through the formation of an electrically conducting path. The phase transition between the low conductive amorphous state and the high conductive crystal]me state was caused by the set and reset pulses respectively which fed through electrical signal. Set pulse has 4.3 V. 200 ns. then sample resistance is $80\sim100{\Omega}$. Reset pulse has 8.6 V 80 ns, then the sample resistance is $50{\sim}100K{\Omega}$. For such high resistance ratio of $R_{reset}/R_{set}$, we can expect high sensing margin reading the recorded data. We have confirmed that phase change properties of $Ge_1Se_1Te_2$ materials are closely related with the structure through the experiment of self-heating layers.