• Mass Spectrometry Letters
• /
• 제5권1호
• /
• pp.30-33
• /
• 2014

A solid phase extraction (SPE) method was optimized for the quantitative analysis of perfluorooctanoic acid (PFOA) in serum using hydrophilic-lipophilic balance SPE and LC-MS/MS. Fetal bovine serums spiked with $^{13}C_8$-PFOA before or after SPE were used as test samples for evaluation of the SPE efficiency. Simultaneous evaluation of matrix effects and absolute SPE recovery for $^{13}C_8$-PFOA in serum using different sample pre-treatments and SPE conditions allowed optimization of SPE process efficiency with minimal matrix effect and decent SPE recovery. Introduction of protein precipitation as a sample pre-treatment procedure for serum samples before SPE generally decreased matrix effect in LC-MS/MS analysis and provided more stable recovery of PFOA.

• 한국축산식품학회지
• /
• 제35권4호
• /
• pp.466-472
• /
• 2015

A rapid and simple analytical method, using liquid chromatography tandem mass spectrometry (LC-MS/MS), was developed to detect myo-inositol (MI) in infant formulas. For protein removal: acid hydrolysis and lipid removal through organic solvent extraction. The operating conditions for instrumental analysis were determined based on previously reported analogous methods that used LC-MS/MS. Quantitative analysis was used for the detection limit test, infant formula recovery test, and standard reference material (SRM) 1849a to verify the validity of our LC-MS/MS analytical method, which was developed to quantify MI. For validation, the results of our method were compared with the results of quantitative analyses of certified values. The test results showed that the limit of detection was 0.05 mg/L, the limit of quantitation was 0.17 mg/L, and the method detection limit was 17 mg/kg. The recovery test exhibited a recovery between 98.07-98.43% and a relative standard deviation between 1.93-2.74%. Therefore, the result values were good. Additionally, SRM 1849a was measured to have an MI content of 401.84 mg/kg and recovery of 98.25%, which is comparable to the median certified value of 409 mg/kg. From the aforementioned results, we judged that the instrumental analysis conditions and preparation method used in this study were valid. The rapid analytical method developed herein could be implemented in many laboratories that seek to save time and labor.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.189-194
• /
• 2009

In a gas engine based cogeneration system, heat is recovered from two parts, which are jacket water and exhaust gas. The heat from the jacket water is often recovered by a plate type heat exchanger and used for the room heating and/or hot water supply. Depending on the operating conditions of engine and heat recovery system, there should be imbalance in the flow rate and supply pressure between engine and heat recovery side of the heat exchanger. The imbalance cause the deformation of the plate, which affects the pressure drop characteristics. In the present study, the pressure drop inside the heat exchanger has been investigated in a 1/5 scaled test rig and compare with the experimental correlations, which are used for the design.

• 소성∙가공
• /
• 제12권4호
• /
• pp.382-387
• /
• 2003

In this study, to achieve the optimal conditions for mechanical hyper-fine pattern fabrication process, deformation behaviors of the materials during indentation were studied with numerical method by ABAQUS S/W. Brittle materials (Si, Pyrex glass 7740) were used as specimens, and forming conditions to reduce the elastic recovery and pile-up were proposed. The indenter was modeled a rigid surface. Minimum mesh sizes of specimens are 1-10nm. Comparisons between the experimental data and numerical result demonstrated that the finite element approach is capable of reproducing the loading-unloading behavior of a nanoindentation test.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.199-200
• /
• 2019

The purpose of the research is assessing the possibility of strength recovery for mortar added with accidently high amount of fly ash. For compressive strength at 28 day, the sample painted with sodium hydroxide showed higher compressive strength than the sample painted with calcium hydroxide. Regarding the curing conditions, the curing temperature 65℃ provided better conditions than the curing temperature 20℃ in aspect of solution penetration depth and reactivity of fly ash. In the case of drying after saturation, the case painted with sodium hydroxid 65℃ showed the clearest engrossing mark.

• 대한간호학회지
• /
• 제26권1호
• /
• pp.107-126
• /
• 1996

The Purpose of this study was to build a substantive theory about the experience of postpartum depression. The qualitative research method used was rounded theory. The interviewees were eight others who had experienced postpartum depression. The data were collected through in-depth interviews with audiotape recording done by the investigator over a period of twelve months. he data were analyzed simultaneously by a constant comparative method in which new data were continuously coded into categories and properties according to Strauss and Corbin's methodology. Analysis the grounded data resulted in 28 concepts being identified. Eight categories emerged from the analysis. The categories were regret, loss of freedom, isolation of oneself, heartache, loss, emotional upset, avoidance, recovery. These substantive categories are consistent with precious research results. Causal conditions included : regret, loss of freedom. Phenomena : heartache, loss, emotional upset. Context : isolation oneself. Intervention condition : avoidance. Action/interaction strategies : desire for recovery. Consequences : recovery. These categories were synthesized into the core concept-The process of filling the empty loss of self. The process of the experienced postpartum depression was ① change after delivery, ② searching for a reason for depression, ③ effort to recover from postpartum depression, ④ recovery from postpartum depression and return to previous life. The process of recovery from postpartum depression was proceeded by ① support from others, especially husband, ② resolution of stressful life events, ③ reconstructing of life goals and resolution strategies, ④ acceptance of depression and seeking psychiatric treatment. Seven hypotheses were derived from the analysis. ① Mothers who experienced stressful life event and economic problem are more depressive. ② Mothers who have conflict with parents are more depressive. ③ The more somatic symptoms, the more depression. ④ Social support facilitates recovery from postpartum depression. ⑤ Mothers who have lower self-esteem are more depressive. ⑥ Mother's role overload disturbs recovery from postpartum depression. ⑦ Ideal maternal identity facilitates recovery from postpartum depression. Through this substantive theory, nurses can understand the importance of postpartum depression management.

• 한국전산구조공학회논문집
• /
• 제25권4호
• /
• pp.347-354
• /
• 2012

형상기억합금의 복원력 및 복원량은 열 하중 및 기계적 하중으로 인한 마르텐사이트 상에서 오스테나이트 상으로의 상변이에 의한 상변형률 발생에 기인한다. 복원력 및 복원량은 초기 형상 및 하중 부여 방식에 따라 차이가 발생하는데 적절한 설계 전략없이 상변형률에만 의지한 경우 큰 복원력은 발생할 수 있어도 큰 복원량을 기대하기는 어렵다. 이는 형상기억합금의 큰 복원력과 작은 복원량 간의 비대칭성에 기인하며 형상기억합금의 효율적인 이용에 걸림돌이 된다. 본 연구에서는 형상기억합금의 상변이로 발생하는 복원량을 극대화하는 방안으로 형상기억합금 선이 이중으로 감겨있는 이중 나선 구조 형상기억합금 스프링을 제안한다. 그리고 열 하중에 의해 발생하는 복원량을 예측하고 단일 나선 구조 형상기억합금 스프링과 비교 분석하여 이중 나선 구조 형상기억합금 스프링이 단일 나선 구조 형상기억합금 스프링보다 성능 비대칭성을 보다 완화시킬 뿐만 아니라 복원력 대비보다 큰 복원량을 가짐을 보였다.

• 자원리싸이클링
• /
• 제16권1호
• /
• pp.54-58
• /
• 2007

실제 사진폐액에서 은의 회수를 위한 연속순환식 환원 공정을 적용하여 전해시간 및 두 전극간의 전압 차, 농도에 따른 영향을 검토하였다. 희석된 사진폐액에서의 은의 전해효율은 적용전압이 증가하면서 효율이 증가하다가 6V 정도에서 최고의 효율을 보였다. 그러나 그 이상 전압이 증가할수록 은의 회수율은 낮아지는 경향을 보였다. 희석되지 않은 원 사진폐액의 경우에서는 실험조건 하, 전해반응 시 적용 전압이 낮아질수록 효율을 높일 수 있음을 확인하였다.

• 상하수도학회지
• /
• 제30권1호
• /
• pp.105-111
• /
• 2016

This paper presents the applicability of natural zeolite (Clinoptilolite) for recovery of ammonium nitrogen from high-strength wastewater stream. Isotherm experiments showed the ammonium exchange Clinoptilolite followed Freundlich isotherm and its maximum exchange capacity was $18.13mg\;NH_4{^+}-N/g$ zeolite. The X-ray photoelectron spectroscopy (XPS) analysis indicated that a significant amount of nitrogen was adsorbed to the Clinoptilolite. Optimal flowrate for recovery of high concentration ammonium nitrogen was determined at 16 BV/d (=19.2 L/min) throughout the lab-scale column studies operated under various flowrate conditions. This study also provided a method to determine the recovery rate of final product of nitrogen fertilizer based on the model application to the lab-scale continuous data.

• 설비공학논문집
• /
• 제23권4호
• /
• pp.281-286
• /
• 2011

The objective of this study is to optimize the four-bed six-step pressure swing adsorption(PSA) process for high purity $CH_4$ recovery from the biogas. The effects of P/F(purge to feed) ratio and cycle time on the process performance were evaluated. The cyclic steady-states of PSA process were reached after 12 cycles. The purity and recovery rate of product gas, pressure and temperature changes were constant as the cycle repeated. It was shown that the P/F ratio gave significant effect on the product recovery rate by increasing the amount of purge gas in purge and regeneration step. The optimal P/F ratio was found to be 0.08. As the cycle time increased, the product purity decreased by increasing the feed gas flow rate. It was found that the optimal operating conditions were P/F ratio of 0.08 and total cycle time of 1,440 seconds with the purity of 97%.