• Journal of Communications and Networks
• /
• 제6권3호
• /
• pp.235-244
• /
• 2004

There have been a lot of approaches to evaluate and predict transmission control protocol (TCP) performance in a numerical way. Especially, under the recent advance in wireless transmission technology, the issue of TCP performance over wireless links has come to surface. It is because TCP responds to all packet losses by invoking congestion control and avoidance algorithms, resulting in degraded end-to-end performance in wireless and lossy systems. By several previous works, although it has been already proved that overall TCP performance is largely dependent on its loss recovery performance, there have been few works to try to analyze TCP loss recovery performance with thoroughness. In this paper, therefore, we focus on analyzing TCP's loss recovery performance and have developed a simple model that facilitates to capture the TCP sender's behaviors during loss recovery period. Based on the developed model, we can derive the conditions that packet losses may be recovered without retransmission timeout (RTO). Especially, we have found that TCP Reno can retransmit three packet losses by fast retransmits in a specific situation. In addition, we have proved that successive three packet losses and more than four packet losses in a window always invoke RTO easily, which is not considered or approximated in the previous works. Through probabilistic works with the conditions derived, the loss recovery performance of TCP Reno can be quantified in terms of the number of packet losses in a window.

• 한국의류산업학회지
• /
• 제6권2호
• /
• pp.229-233
• /
• 2004

Andongpo, 100% Korean hemp fabric was treated with the glyoxale resin type finishing agent and/or the soluble urethane type finishing agent to determine the optimum process condition of the crease resistant finish and the crease recovery of treated sample fabrics was evaluated for the study. The treatment conditions for the study were 6 conditions, such as, A-1~A-6, in which A-1 was the condition of treatment glyoxale resin type finishing agent only and A-2~A-6 were the condition of treatment both glyoxale resin type finishing agent and soluble urethane type finishing agent. Among the 6 conditions, the crease recovery of the sample treated with A-4 condition was $148^{\circ}$(angle of recovery method) and grade 3.2(appearance method) and so, these samples showed the excellent crease recovery. From the result, 15g/l of the catalyst conc., 50g/l of the glyoxale resin type finishing agent cone., and 40g/l of the softner were the optimum treatment condition for the crease resistant finish of the andongpo.

• Membrane and Water Treatment
• /
• 제1권4호
• /
• pp.231-251
• /
• 2010

The sulfatation of chitosan, by reaction with chlorosulfonic acid under controlled conditions, allowed increasing the pH range of chitosan solubility. The biopolymer was characterized using FTIR and $^{13}C$-NMR spectroscopy, elemental analysis and titration analysis and it was tested for mercury recovery by polymer enhanced ultrafiltration (PEUF). In slightly alkaline conditions (i.e., pH 8) mercury recovery was possible and at saturation of the polymer the molar ratio $-NH_2$/Hg(II) tended to 2.6. Polymer recycling was possible changing the pH to 2 and the polymer was reused for 3 cycles maintaining high metal recovery. The presence of chloride ions influences metal speciation and affinity for the polymer and "playing" with metal speciation allowed using the PEUF process for mercury separation from cadmium; at pH 11 the formation of hydroxo-complexes of Hg(II) limits it retention. Cake formation reveals the predominant controlling step for permeation flux.

• KSBB Journal
• /
• 제13권3호
• /
• pp.272-278
• /
• 1998

Cell recovery from high cell density broths of Alcaligenes eutrophus by pretreatment with aluminum-based coagulants such as aluminum sulfate, polyaluminum hydrooxide chloride silicate (PACS), and polyaluminum hydrooxide chloride (Hi-PAX) was carried out. Cells coagulated with coagulants could be successfully recovered above 95-99% by centrifugation or filtration. The optimum initial pH of fermentation broths for cell recovery was in the range of 10 to 12. Optimum coagulants dosage for cell recovery increased with increasing of cell concentrations (21-160 g/L). The optimum coagulant dosages to recover cells with more than 95% cell recovery by centrifugation for the cell concentrations ranged 21-160 g/L were as follows: aluminum sulfate, 416-1708 mg Al/L; PACS, 211-826 mg Al/L; Hi-PAX, 320-960 mg Al/L. At optimum conditions for the coagulation of cells, centrifugal forces for 95% of cell recovery were dependent on the cell concentration. The centrifugal forces at 82 g/L and 160 g/L of cell concentration were only 45${\times}$g and 1600${\times}$g, respectively.

• Journal of Biosystems Engineering
• /
• 제11권2호
• /
• pp.23-30
• /
• 1986

A waste heat recovery system for an internal combustion engine for agriculture was developed. The system is for recovering both of exhaust heat and cooling heat of an engine and is so simple in its structure that can be used in rural area easily. A series of experiment was carried out to the experiment which will be discussed later on, collect data for the performance of the system at various operating conditions of the system and an engine and to determine a range of coolant temperature in which performance of an engine is not affected by the heat recovery system incorporated. The obtained experimental data is not only useful to materialize performance of the system at the experimental conditions but also to construct a mathematical model of the system to predict the system variables beyond the scope of

• 생명과학회지
• /
• 제20권7호
• /
• pp.999-1004
• /
• 2010

밀기울 발효에서 효소회수의 모델로 Aspergillus niger를 고체상태로 발효시켜 조사하였다. 발효시킨 밀기울에서 증류수로 효소추출 효율은 초산 완충액, 구연산 완충액, 구연산-인산 완충액 및 5% 메탄올 처리보다 높았다. 따라서, 추출 용매로 증류수를 이용하여 최적 조건을 상세히 검토하였다. 최적 조건은 고체와 액체 용매를 1:5의 비율로 증류수로서 세 번 세척하였을 때에 최대 회수율을 0.025 U/g으로 확보하였다.

• 한국의류학회지
• /
• 제48권2호
• /
• pp.254-268
• /
• 2024

Human agents are increasingly being replaced by chatbots. However, like humans, chatbots can also make mistakes in service delivery by failing to provide accurate answers to customer questions while research on service recovery has been highly focused on human employees. Recognizing the necessity of research on effective chatbot service recovery strategies, this study investigated the relationships among service recovery messages (courteous apology vs. humorous apology), perceived sincerity, recovery satisfaction, and continuous usage intention. An online experiment was conducted with the participants randomly assigned to one of two experimental conditions (courteous apology vs. humorous apology). After using the chatbot developed for this study, the participants completed a questionnaire. The analysis results revealed that, in comparison to the humorous apology, the courteous apology had a higher positive predictive effect on perceived sincerity, Furthermore, perceived sincerity and recovery satisfaction sequentially mediated the relationship between the chatbot's courteous apology and continuous usage intention. In conclusion, this study demonstrates that the courteous apology was a more effective approach as a chatbot service recovery strategy. This study offers insights into crafting recovery service messages for chatbots.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1097-1100
• /
• 2001

In this paper, the electro-chemical-machining characteristics of Ni-Ti Shape Memory Alloy(SMA) was investigated. From the experimental results, the optimal electro chemical machining conditions for satisfying the machining quality(fine surface & high recovery stress) might be confirmed. And it was concluded that optical electro chemical condition for Ni-Ti SMA could be obtained at approximately 100% current efficiency and high frequency pulse current.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVI)
• /
• pp.502-505
• /
• 2005

This study was concentrated to investigate the dependency of recovery yield on the extraction conditions. From fruiting body, the extracted amount of polysaccharide was studied with various solvent. In order to maximize the yield, the optimum extraction conditions were elucidated with respect to solvent, temperature and time. In addition, the dialysis was applied to obtain the higher purity of polysaccharide with varying the exposure time.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2003년도 추계 학술발표회 논문집
• /
• pp.299-304
• /
• 2003

Heat regenerator occupied by regenerative materials improves thermal efficiency of regenerative combustion system through the recovery of sensible heat of exhaust gases. By using one-dimensional two-phase fluid dynamics model, the unsteady thermal flow of regenerators with spherical particles were numerically analyzed to evaluate performance of ratio of waste heat recovery and temperature efficiency and to suggest optimized conditions of heat regenerator. It is predicted that exhaust gases temperature at regenerator outlet of 3.5$\times$10$^{6}$ kcal/hr heat regenerator is even lower than design condition and ratio of waste heat recovery is 75.8％.