• Korean Journal of Hydrosciences
• /
• 제4권
• /
• pp.21-32
• /
• 1993

The estimates of both runoff depth and peak runoff by the basin runoff curve numbers, which are CN-II for antecedent moisture condition- II and CN -III for antecedent moisture condition-III, obtained from hydrological soil-cover complexes of 26 watersheds are investigated by making use of the observed curve numbers, which are median curve number and optimum curve number, computed from 250 rainfall-runoff records. For gaged basins the median curve numbers are recommended for the estimation of both runoff depth and peak runoff. For ungaged basin, found is that for the estimate of runoff depth CN-II is adequate and for peak runoff CN-II is suitable. Also investigated is the variation of the runoff curves during storms. By the variable runoff curve numbers, the prediction of runoff depth and peak runoff can be improved slightly.

• 한국항만학회지
• /
• 제14권1호
• /
• pp.87-95
• /
• 2000

This stability of a plate structure is very crucial problem which results in wrinkle and buckling. In this study, the effect of the pattern of spot-welding points of the two rectangular plates on the compressive and shear buckling load is studied with respect to the thickness, aspect ratio of plates and number of welding spots. Buckling coefficient of the plate not welded was compared with that of two plates with various thickness to extract the effect of thickness. The effect of number of welding spots are studied in two directions, longitudinal and transverse directions. The conclusions obtained were that the reinforcement effect was maximized when the aspect ratio was close to 1.75 at compressive load condition and that the effect of number of welding spots in transverse direction was larger than that in longitudinal direction at shearing load condition.

• 대한수학회논문집
• /
• 제16권1호
• /
• pp.137-152
• /
• 2001

Steady two-dimensional flows due to an applied pressure distribution in water of finite depth are considered. Gravity is included in the dynamic boundary condition. Gravity is included in the dynamic boundary condition. The problem is solved numerically by using the boundary integral equation technique. It is shown that, for both supercritical and subcritical flows, solutions depend on three parameters: (i) the Froude number, (ii) the magnitude of applied pressure distribution, and (iii) the span length of pressure distribution. For supercritical flows, there exist up to two solutions corresponding to the same value of Froude number for positive pressures and a unique solution for negative pressures. For subcritical flows, there are solutions with waves behind the applied pressure distribution. As the Froude number decreases, these waves when the Froude numbers approach the critical values.

• 오토저널
• /
• 제10권4호
• /
• pp.66-74
• /
• 1988

The ignition quality of ignition system is influenced by spark energy, discharge pattern of spark energy and spark duration. In this paper, the characteristics of multiple spark ignition system have been investigated for various number of spark and spark interval. The results, which were compared with those obtained with a standard single spark ignition, show that engine output is increased, and lean misfire limit is extended with the multiple spark ignition system. The most effective number of spark at the most effective spark interval that are determined by engine performance test, were 6 times spark at 0.02ms spark interval. For the above condition of spark, engine torque was increased about 20% comparing with conventional ignition system and lean misfire limit was extended to air-fuel ratio 22.5:1. This study researched the rate of heat release and quantity of heat release influenced by a condition of spark on the mass burned in order to investigate the relationship between the rate of mass burned and number of spark times.

• 설비공학논문집
• /
• 제13권5호
• /
• pp.348-355
• /
• 2001

The coupled conduction and convection heat transfer from a protruding heated module in a horizontal channel with a variation of channel height is experimentally investigated. The input power to the module is 3, 7W and thermal resistance of module support is 0.06 , 1.03 and 158K/W. the Reynolds number ranged from 350 to 4500 corresponding to the inlet velocity(0.4~1.3 m/s) and channel height(11~35 mm). The results were obtained that the decrease of thermal resistance of module support reduces the module temperature by redistributing the heat flux and the overall thermal resistance of the module. In the study the effect of channel height is very significant in the adiabatic condition, but negligible in the conjugate condition. Finally, correlations for Nusselt number and $Q_B$/Q with a variation of Reynolds number were developed respectively.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1999년도 추계학술대회논문집
• /
• pp.265-272
• /
• 1999

This stability of a plate structure is very crucial problem which results in wrinkle and bucking. In this study, the effect of the pattern of spot-welding points of the two rectangular plates on the compressive and shear bucking load is studied with respect to the thickness, aspect ratio of plates and number of welding spots. Buckling coefficient of the plate not welded was compared with that of two plates with various thickness to extract the effect of thickness. The effect of number of welding spots are studied in two directions, longitudinal and transverse directions. The conclusions obtained were that the reinforcement effect was maximized when the aspect ratio was close to 1.75 at compressive load condition and that the effect of number of welding spots in transverse direction was larger than that in longitudinal direction at shearing load condition.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제13권1호
• /
• pp.11-18
• /
• 2006

Let f : (X, A) ${\rightarrow}$ (Y, B) be a map of pairs of compact polyhedra. A surplus Nielsen root number $SN(f;X\;{\backslash}\;A,\;c)$ is defined which is lower bound for the number of roots on X \ A for all maps in the homotopy class of f. It is shown that for many pairs this lower bound is the best possible one, as $SN(f;X\;{\backslash}\;A,\;c)$ can be realized without by-passing condition.

• 대한수학회보
• /
• 제45권1호
• /
• pp.53-57
• /
• 2008

Let G be a graph, and let a, b, k be integers with $0{\leq}a{\leq}b,k\geq0$. Then graph G is called an (a, b, k)-critical graph if after deleting any k vertices of G the remaining graph of G has an [a, b]-factor. In this paper, the relationship between binding number bind(G) and (a, b, k)-critical graph is discussed, and a binding number condition for a graph to be (a, b, k)-critical is given.

• 대한수학회보
• /
• 제60권4호
• /
• pp.933-955
• /
• 2023

For any prime number p, let J(p) be the set of positive integers n such that the numerator of the n^th harmonic number in the lowest terms is divisible by this prime number p. We consider an extension of this set to the generalized harmonic numbers, which are a natural extension of the harmonic numbers. Then, we present an upper bound for the number of elements in this set. Moreover, we state an explicit condition to show the finiteness of our set, together with relations to Bernoulli and Euler numbers.

• International Journal of Internet, Broadcasting and Communication
• /
• 제15권3호
• /
• pp.203-210
• /
• 2023

In this paper, we develope a stock trading system that automatically buy and sell stocks in Kiwoom Securities' HTS system. The system is made by using Kiwoom Open API+ with the Python programming language. A trading strategy is based on an enhanced system query method called a Condition-Search. The Condition-Search script is edited in Kiwoom Hero 4 HTS and the script is stored in the Kiwoom server. The Condition-Search script has the advantage of being easy to change the trading strategy because it can be modified and changed as needed. In the HTS system, up to ten Condition-Search scripts are supported, so it is possible to apply various trading methods. But there are some restrictions on transactions and Condition-Search in Kiwoom Open API+. To avoid one problem that has transaction number and frequency are restricted, a method of adjusting the time interval between transactions is applied and the other problem that do not support a threading technique is solved by an IPC(Inter-Process Communication) with multiple login IDs.