• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(2)
• /
• pp.602-607
• /
• 1995

This article presents safety review experience of microprocessor-based Interposing Logic System(ILS) of Engineering Safety Feature Actuation System(ESFAS). The ILS is the first application of computerized logic design to safety system in Korean nuclear power plants without verification of the system reliability by proven technology concept. As a result of evaluation for the ILS, Korea Institute of Nuclear Safety(KINS) concluded that the microprocessor-based ILS is not acceptable in some features detailed enough to defend against software common mode failures(CMF). Therefore, we required licensee to install hardwired interlock signal configuration and a Hardwired Backup Panel to control safety-related equipment. We believe that the microprocessor-based ILS with the hardwired backup panel and inter-connection of interlock signal by hardwired configuration will improve the plant safety.

• 한국항공운항학회지
• /
• 제18권3호
• /
• pp.92-98
• /
• 2010

The AHP methodology compares criteria, or alternatives with respect to a criterion, in a natural, pairwise mode. AHP has been applied in a wide variety of applications multi objective decision making being just one. If a group of expert with different aspect, they need some way to revise expert group. We proposed the concatenation of expert to survey the AHP pairwise question for multi-attribute decision making. In this paper, we suggest a way to revise the expert's priorities in hierarch using concept of different group opinion.

• 한국전자파학회논문지
• /
• 제25권6호
• /
• pp.690-699
• /
• 2014

제트엔진변조(Jet Engine Modulation: JEM) 식별기법은 제트엔진의 주기적인 회전에 의해 변조되는 레이더 반사 신호로부터 제트엔진의 종류를 식별하는 기법이다. 본 논문에서는 JEM의 새로운 접근법으로서, 제트엔진의 특성을 추출하기 위한 자동화 알고리즘을 제안한다. 먼저 복소 신호의 경험적인 모드 분리법(Complex Empirical Mode Decomposition: CEMD)을 거친 JEM 신호의 자기상관도로부터 제트엔진의 회전 주기를 산출한다. 그 후 DM(Divisor-Multiplier) 규칙 및 'Scoring' 개념을 JEM 스펙트럼 해석에 도입하여 최종적인 날개개수를 추정한다. 시뮬레이션 및 측정 JEM 신호로의 적용 결과를 통해 제안된 알고리즘이 정확하고 자동적인 제트엔진 정보 추출에 효과적임을 입증하였다.

• Earthquakes and Structures
• /
• 제15권6호
• /
• pp.667-685
• /
• 2018

In eccentrically braced steel frames (EBFs), the links are fuse members which enter inelastic phase before other structure members and dissipate the seismic energy. Based on the force-based seismic design method, damages and plastic deformations are limited to the links, and the main structure members are required tremendous sizes to ensure elastic with limited or no damage. Force-based seismic design method is very common and is found in most design codes, it is unable to determine the inelastic response of the structure and the damages of the members. Nowadays, methods of seismic design are emphasizing more on performance-based seismic design concept to have a more realistic assessment of the inelastic response of the structure. Links use ordinary steel Q345 (the nominal yielding strength $f_y{\geq}345MPa$) while other members use high strength steel (Q460 $f_y{\geq}460MPa$ or Q690 $f_y{\geq}690MPa$) in eccentrically braced frames with high strength steel combination (HSS-EBFs). The application of high strength steels brings out many advantages, including higher safety ensured by higher strength in elastic state, better economy which results from the smaller member size and structural weight as well as the corresponding welding work, and most importantly, the application of high strength steel in seismic fortification zone, which is helpful to popularize the extensive use of high strength steel. In order to comparison seismic behavior between HSS-EBFs and ordinary EBFs, on the basis of experimental study, four structures with 5, 10, 15 and 20 stories were designed by PBSD method for HSS-EBFs and ordinary EBFs. Nonlinear static and dynamic analysis is applied to all designs. The loading capacity, lateral stiffness, ductility and story drifts and failure mode under rare earthquake of the designs are compared. Analyses results indicated that HSS-EBFs have similar loading capacity with ordinary EBFs while the lateral stiffness and ductility of HSS-EBFs is lower than that of EBFs. HSS-EBFs and ordinary EBFs designed by PBSD method have the similar failure mode and story drift distribution under rare earthquake, the steel weight of HSS-EBFs is 10%-15% lower than ordinary EBFs resulting in good economic efficiency.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.124-127
• /
• 2005

As computer capability and test skill become more and more advanced, finite element method and modal test are being widely applied in engineering design. In order to correlate and reconcile the inevitable discrepancies between the analytical and experimental models, many techniques have been developed. Among these methods, multiple-system methods are known as the effective tools in that they can supply the rich modal data available which are experimentally obtained. These abundant modal data can help structural system parameters estimated well. Multiple-system methods can be classified into the structural modification methods and feedback controller methods. The structural modification methods need the physical attachment of structures and their concept may limit the application of them. To overcome this drawback, the feedback controller methods are addressed which enable us to get more modal data without the structural change. Mode decoupling controller(MDC), one of them, is to use acceleration out)ut feedback to perturb an open-loop system. The output feedback controller generally cannot guarantee the stability of a closed-loop system. However, MDC can solve this problem under the certain constraints. So far, MDC utilizes accelerations as the sensor signals. In this research, strain sensors are going to be picked up to apply to the MDC. Strain output is recently used for structural system identification due to the drastically improved and miniaturized strain sensor. In this paper, we show that the MDC using strain output has differences compared with acceleration output in estimating the structural system parameters. The associated simulation is performed to demonstrate the above mentioned characteristics.

• 한국자동차공학회논문집
• /
• 제15권1호
• /
• pp.162-170
• /
• 2007

Currently, due to the serious world-wide air pollution by substances emitted from vehicles, emission control is enforced more firmly and it is expected that the regulation requirements for emission will become more severe. Anew concept combustion technology that can reduce the NOx and PM in relation to combustion is urgently required. Due to such social requirement, technologically advanced countries are making efforts to develop an environment-friendly vehicle engine at the nation-wide level in order to respond to the reinforced emission control. As a core combustion technology among new combustion technologies for the next generation engine, the homogeneous charge compression ignition (HCCI) is expanding its application range by adopting multiple combustion mode, catalyst, direct fuel injection and partially premixed combustion. This study used a 2-staged injection method in order to apply the HCCI combustion method without significantly altering engine specifications in the aspect of multiple combustion mode and practicality by referring to the results of studies on the HCCI engine. And it is investigated that the effects of the engine rpm and load(or A/F) to emission characteristics.

• 한국전산구조공학회논문집
• /
• 제22권1호
• /
• pp.89-103
• /
• 2009

이 연구에서는 얇은 판형구조물의 손상탐지에 널리 사용되어오는 램파에 시간반전(time reversal)개념의 적용성을 이론적으로 규명한다. 고전적 시간반전 음향학에 의하면, 센서에서의 출력신호를 시간영역에서 반전 후 재입사시켜 원래의 가진점으로 돌려보내면, 그 가진점에서 원래 입력신호가 복원된다. 그러나 램파에 시간반전과정을 적용하게 되면 램파 고유의 분산성과 판 경계에서의 파 반사로 인해 시간반전성이 복잡한 양상을 띠게 된다. 이러한 램파의 시간반전성을 보다 잘 이해하기 위해 이 연구에서는 램파의 시간반전과정을 이론적으로 규명한다. 특히, 램파의 내부모드분산, 다중모드분산, 그리고 판 경계면에서의 램파의 반사가 시간반전성에 미치는 영향을 정식화하였다 간단한 수치예제를 통해 이 연구에서 제시된 이론적 발견들의 타당성을 검증한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.508-514
• /
• 2005

This paper is concerned with the active vibration control of a grid structure equipped with piezoceramic sensors and actuators. The grid structure is a replica of the solar panel commonly mounted on satellites, which contains complex natural mode shapes. The multi input and multi output positive position feedback controller is considered as an active vibration controller for the grid structure. A new concept, the block-inverse technique, is proposed to cope with more modes than the number of actuators and sensors. This study also deals with the stability and the spillover effect associated with the application of the multi-input multi-output positive position feedback controller based on the block inverse technique. It was found that the theories developed in this study are capable of predicting the control system characteristics and its performance. The new multi-input multi-output positive position feedback controller was applied to the test structure using a digital signal processor and its efficacy was verified by experiments..

• 한국소음진동공학회논문집
• /
• 제15권9호
• /
• pp.1037-1044
• /
• 2005

This paper is concerned with the active vibration control of a grid structure equipped with piezoceramic sensors and actuators. The grid structure is a replica of the solar panel commonly mounted on satellites, which contains complex natural mode shapes. The multi-input and multi-output positive position feedback controller is considered as an active vibration controller for the grid structure. A new concept, the block-inverse technique, is proposed to cope with more modes than the number of actuators and sensors. This study also deals with the stability and the spillover effect associated with the application of the multi-input multi-output positive position feedback controller based on the block-inverse technique. It was found that the theories developed in this study are capable of predicting the control system characteristics and its performance. The new multi-input multi-output positive position feedback controller was applied to the test structure using a digital signal processor and its efficacy was verified by experiments.

• 복식문화연구
• /
• 제21권3호
• /
• pp.309-323
• /
• 2013

This study examined the expression mode and feature about photomontage indicated in the 21st century's Contemporary fashion. This intends to have better understanding on photomontage and to provide theoretical explanation to help a creative design development using photomontage in the future. For the research method, review over photomontage concept and its historical background was carried out with relevant literature and precedent studies. Then, analysis was followed about 258 pieces of photomontage application works featured in the four major global collections from 2001S/S to 2011F/W. Among types of photomontage expression in the Contemporary fashion, objects in the nature like animal, plant, scenery picture took up the highest frequency as motive. Other types appeared in the following order: the people-oriented type such as eminent person's figure or partial body, the ready-made image including diverse daily goods in the modern consumption society, a variety of printed stuff like cartoon, newspaper and magazine, the type of photomontage expression through borrowing the earlier famous art pieces or doing the cooperative work with artists in different fields, applications like architecture, land marks in many cities in the world, and interior, things assembled with various images, modified religious images in photomontage from Buddha or holy picture. Therefore, the modern fashion that uses photomontage could possibly feature popularity, naturalism, playfulness and creativity.