• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.4
• /
• pp.453-462
• /
• 1994

An unsteady quasi one-dimensional model of momentum, heat and mass transfer in a falling film of a vertical plate absorber which is cooled by air was developed using the integral method. Energy conservation of the absorber wall is considered in the model. The model can predict absorption rate, film thickness and mean velocity as well as concentration and temperature profiles. Predictions of steady state temperature and concentration profiles for LiBr/water system for constant wall temperature condition are in good agreement with the two-dimensional finite difference method solutions. Effects of operating conditions, such as convective heat transfer coefficient between the cooling air and the absorber wall, cooling air temperature and film thickness at inlet, on absorption rate of water vapor into LiBr/water solution were shown.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.11
• /
• pp.954-958
• /
• 2000

The characterization of zinc diffusion processes applied for high-speed avalanche photodiodes has been examined. The different diffusion process conditions for InP test structures were explored. The zinc diffusion profiles, such as the diffusion depth and the zinc dopant concentration, were examined using secondary ion mass spectrometry with varying the process variables and material parameters. It is observed that the diffusion profiles are severly impacted on the process parameters, such as the amount of Zn$_3$P$_2$ source and the diffusion time, as well as material parameters, such as doping concentration of diffusion layer. These results can be utilized for the high-speed avalanche photodiode fabrication.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.731-734
• /
• 2000

The characterization of Zinc diffusion processes applied fur high-speed avalanche photodiodes has been examined. The different diffusion process conditions for InP test structures were explored. The Zinc diffusion profiles, such as the diffusion depth and the Zinc dopant concentration, were examined using secondary ion mass spectrometry with varying the process variables and material parameters. It is observed that the diffusion profiles are severely impacted on the process parameters, such as the amount of Zn$_3$P$_2$source and the diffusion time, as well as material parameters, such as doping concentration of diffusion layer. These results can be utilized for the high-speed avalanche photodiode fabrication.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.401-413
• /
• 2022

This paper provides a simple method by which to estimate the cross-section stress profiles for nozzles designed according to ASME Code Section III. Further, this method validates the effectiveness of earlier work performed by the authors on standard nozzles. The method requires only the geometric information of the pressure vessel and the attached nozzle. A PWR direct vessel injection nozzle, a PWR outlet nozzle, a PWR inlet nozzle and a BWR recirculation outlet nozzle are selected based on their corresponding specific designs, e.g., a varying nozzle radius, a varying nozzle thickness and an outlet nozzle boss. A cross-section stress profile comparison shows that the estimates are in good agreement with the finite element analysis results. Differences in stress intensity factors calculated in accordance with ASME BPVC Section XI Appendix G are discussed. In addition, a change in the dimensions of an alternate nozzle design relative to the standard values is discussed, focusing on the stress concentration factors of the nozzle inside corner.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2006.09a
• /
• pp.1-4
• /
• 2006

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.187.2-187
• /
• 2001

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.2
• /
• pp.169-178
• /
• 2011

The dispersion of a pollutant in a turbulent boundary layer has been described in this study by using a two-dimensional lattice Boltzmann method (LBM) and the Smagorinsky sub-grid-scale (SGS) model. The scalar transport equation corresponding to the pollutant concentration is adopted; the pollutant is considered to be in a continuous phase. The pollutant source is classified as ground-level source (GLS) and elevated-point source (ES). Air velocity and particle concentration profile for the pollutant are compared with the respective results and profiles obtained in the experiments of Fackrell and Robins (1982) and Raupach and Legg (1983). The numerical results obtained in this study, i.e., the simulation and the experimental data for the mean flow velocity profiles and the pollutant concentration profiles, are in good agreement with each other.

• Nutrition Research and Practice
• /
• v.3 no.1
• /
• pp.31-37
• /
• 2009

Recently, Korean people are consuming seaweeds almost 3.5 times more now than three decades ago. It is well known that seaweeds contain lots of soluble dietary fiber in addition to micronutrients such as ${\beta}$-carotene, iodine and some bioactive components. Seaweeds are considered to be effective for preventing chronic diseases including obesity, diabetes mellitus, atherosclerosis, cancer or constipation. This study was conducted to investigate the effect of seamustard intake on body weight gain, blood glucose level and lipid profiles in rats fed diets with different energy nutrient composition. Male Sprague-Dawley rats (average initial weight 103.7g) were divided into groups for two experiments as follows; Control, M2.5 & M5 groups (Exp. I) and M5, M10, HCM5, HCM10, HFM5 & HFM10 groups (Exp. II). The rats were fed diet and water ad libitum for 4 weeks. In general, there was no significant difference in blood glucose and triglyceride concentration among groups. In Exp. I, serum LDL-cholesterol level of rats fed diet with 5% seamustard powder (M5) was significantly lower than that of control group, while HDL-cholesterol level, TC/LDL ratio and weight of adrenal gland were higher. In Exp. II, food intake, body weight gain and EER of high fat diet with 10% seamustard group (HFM10) were the lowest among groups. Except gastrocnemius muscle, all organ weights of HFM10 group were the lowest. Fecal cholesterol excretion and serum LDL-cholesterol concentration of HFM10 group were the highest, while serum HDL-cholesterol level was the lowest among groups. Interestingly, HDL-cholesterol concentration was the highest in HCM5 group among groups. From these results, it was suggested that seamustard intake might be more effective for body weight control, but not for improving blood lipid profiles in high fat diet than in high carbohydrate diet.

• Animal Bioscience
• /
• v.36 no.12
• /
• pp.1860-1868
• /
• 2023

Objective: This study was conducted to evaluate the effects of optimal trace mineral levels on the physiological responses, reproductive performance, litter performance, blood profiles and milk composition in gestating sows. Methods: A total of 59 multiparous sows (Yorkshire×Landrace) with similar body weight (BW), backfat thickness (BF), and parity were assigned to one of four treatments with 14 or 15 sows per treatment using a completely randomized design. The treatments were 100% (M1), 300% (M3), 600% (M6), and 900% (M9) of the National Research Council (NRC) Nutrient Requirements of Swine. During lactation period, all the sows were fed the same commercial lactation diet. Results: No significant differences were observed in the BW, BF, reproductive performance, milk composition, or growth performance of the piglets. On day 70 of gestation, the serum zinc concentration showed a quadratic response to M6 treatment (quadratic, p<0.05). Moreover, as the dietary mineral levels increased, the zinc concentration increased linearly at 110 days of gestation (linear, p<0.05). Furthermore, copper and iron concentrations in the serum of sows at 24 h postpartum decreased linearly when high levels of dietary minerals were provided (linear, p<0.05). In the serum of piglets, serum zinc concentrations decreased linearly (linear, p<0.05), and iron concentration showed a quadratic response (quadratic, p<0.05) with an increase in trace mineral premix levels in gestation diets. Conclusion: The current trace mineral requirements of NRC (2012) are suitable for gestating sows, and the addition of dietary mineral levels in the gestating diet did not show any improvements during the gestation and lactation periods.

• Macromolecular Research
• /
• v.10 no.5
• /
• pp.246-252
• /
• 2002

In order to the development of the delivery device of long-acting local anesthetics for postoperative analgesia and control of chronic pain of cancer patient, fentnyl-loaded poly (L-lactide-co-glycolido) (PLGA, molecular weight, 5,000 g/mole; 50 : 50 mole ratio by lactide to glycolide) microspheres (FMS) were studied. FMS were prepared by an emulsion solvent-evaporation method. The influence of several preparation parameters such as initial drug loading, PLGA concentration, emulsifier concentration, oil phase volume, and fabrication temperature has been investigated on the fentanyl release profiles. Generally, the drug showed the biphasic release patterns, with an initial diffusion followed by a lag period before the onset of the degradation phase, but there was no lag time in our system. Fentanyl was slowly released from FMS over 10 days in vitro with a quasi-zero order property. The release rate increased with increasing drug loading as well as decreasing polymer concentration with relatively small initial burst effect. From the results, FMS may be a good formulation to deliver the anesthetic for the treatment of chronic pain.