• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.2
• /
• pp.152-158
• /
• 2003

Titration method is one of the widely used methods for the concentration measurement of absorbent ammonia/water. However, this method is inconvenient because the solution should be extracted for the measurement. Moreover, significant error can be introduced by the evaporation of ammonia during the sampling and measuring procedure. In this study a reliable in-line concentration measurement method was proposed. To prove the validity of the concept, a measuring apparatus was designed, built, and tested with water. It is found that the location of flow inlet and exit is important in the measurement accuracy. The flow inlet and exit located in the middle of the test cell showed the best result. By the error analysis, it is expected that the ammonia concentration can be measured within the error of $\pm$0.18% assuming the error of 0.1 K in temperature measurement and 0.1 g in weight measurement.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1540-1545
• /
• 2004

Measurement of concentration fields in a micro-channel is the crucial technology in the area of Lab-on-a-chip to be used for various bio-chemical applications. It is wel-known that the only possible way to measure the concentration field in the micro-channel is using micro-LIF(Laser Induced Fluorescence) method. However, an accurate concentration field at a given cross plane in a micro-channel has not been made so far due to the limit of light illumination. The present study demonstrates a novel method to provide an ultra thin laser sheet beam having 5 microns thickness by a micro focus laser line generator. Nile Blue A was used as fluorescent dye for LIF measurement. The laser sheet beam illuminates an exact plane of concentration measurement in the micro-channel to increase the signal to noise ratio and reduce the depth uncertainty considerably.

• Particle and aerosol research
• /
• v.12 no.1
• /
• pp.21-26
• /
• 2016

In order to realize In-line and convenient measurement for solid-gas two phase flows, Light Transmission Fluctuation (LTF) based on the random variation of transmitted light intensity, light scattering theory and cross-correlation method was presented for online measurement of particle size, concentration and velocity. The statistical relationship among transmitted light intensity, particle size and particle number in measurement zone was described by Beer-Lambert Law. Accordingly, the particle size and concentration were determined from the fluctuation signal of transmitted light intensity. Simultaneously, the particle velocity was calculated by cross-correlation analysis of two neighboring light beams. By considering the influence of concentration variation in industrial applications, the improved algorithm based on spectral analysis of transmitted light intensity was proposed to improve measurement accuracy and stability. Therefore, the online measurement system based on LTF was developed and applied to measure pulverized coal in power station and raw material in cement plant. The particle size, concentration and velocity of powder were monitored in real-time. It can provide important references for optimal control, energy saving and emission reduction of energy-intensive industries.

• Nuclear Engineering and Technology
• /
• v.52 no.3
• /
• pp.538-543
• /
• 2020

Boric acid is used as a coolant for pressurized-water reactors, and the degree of burnup is controlled by the concentration of boric acid. Therefore, accurate measurement of the concentration of boric acid is an important factor in reactor safety. An improved system was proposed for the accurate determination of boron concentration. A new boron-concentration measurement technique, called multisensitive detection, was developed to improve the measurement accuracy of boron meters. In previous studies, laboratory-scale experiments were performed based on different sensitivity detectors, confirming a 65% better accuracy than conventional single-detector boron meters. Based on these experimental results, an experimental system simulating the coolant-circulation environment in the reactor was constructed; accuracy analysis of the boron meter with a multisensitivity detector was performed at the actual coolant pressure and temperature. In this study, the boron concentration conversion equation was derived from the calibration test, and the accuracy of the boron concentration conversion equation was examined through a repeatability test. Through the experiment, it was confirmed that the accuracy was up to 87.5% higher than the conventional single-detector boron meter.

• Herbal Formula Science
• /
• v.14 no.2
• /
• pp.57-66
• /
• 2006

Objectives : The objective of this study is to observe the effect of Saryuktangkamibang, Saryuktang with Liriopis Tuber, Lycii Fructus, Schizandrae Fructus, and Bombyx Batryticatus, on the experimental diabetes. Methods : In order to induce diabetes experimentally, injected streptozotocin to the vein in the tail of rats and then treated oral administration of Saryuktangkamibang water extracts. In the measurement of the variation levels of glucose, ALP, creatinine, and BUN concentration for each concentration levels for serum (0.2g/100g, 0.4g/l00g, 0.6g/100g), concentration level of glucose significantly decreased in 0.4g/l00g concentration level of Saryuktangkamibang. With this 0.4g/l00g concentration level of Saryuktangkamibang, the following conclusion was derived from the measurement of the serum levels of glucose. ALP, AST, ALT, creatinine, and BUN concentration for the injection of each 4th, 11th, and 18th day. Results : 1. In the measurement for each concentrations, the glucose concentration level in the serum significantly decreased on the 9th day in the Saryuktangkamibang-dosed group. 2. The creatinine and BUN concentration level in the serum significantly decreased on the 9th day in the Saryuktangkamibang-dosed group to which 0.6g/100g injected. 3. In the measurement for each dosage dates, the glucose concentration level in the serum significantly decreased on the 11th day in the Saryuktangkamibang-dosed group to which 0.6g/100g injected. 4. The AST concentration level in the serum significantly decreased on the 11th day in the Saryuktangkamibang-dosed group. Conclusion : Saryuktangkamibang, Saruktang with Liriopis Tuber, Lycii Fructus, Schizandrae Fructus, and Bombyx Batryticatus, has an effect of hypoglycemia, with no hepato-renal dysfunction. For the experimental results above, in that nephrotoxicity significantly decreased on the 0.6g/100g concentration, another research such as study for effect in other ranges and study for effect of dosage term except the concentration range of this study is necessary. Also dosage of appropriate concentration of Saryuktangkamibang is thought to provide valuable aid to cure on diabetes.

• Herbal Formula Science
• /
• v.14 no.2
• /
• pp.33-44
• /
• 2006

Objective : The objective of this study is to observe the effect of Yukmijiwhangtangkamibang(YukmD with Liriopis Tuber, Amomi Fructus, Citri Pericarpium, Zizyphi Spinosae Semen, Drynariae Rhizoma Ephedrae Herba, Ginseng Radix, Phellodendri Cortex, on the experimental diabetes. Methods : In order to induce diabetes experimentally, injected streptozoticin to the vein in the tail of rats and then treated oral administration of Yukmi water extracts. In the measurement of the variation levels of glucose, ALP, creatinine, and BUN concentration for each concentration levels for serum (382.5mg/l00g, 510.0mg/100g, 637.5mg/100g), concentration level of glucose significantly decreased in 510.0mg/l00g concentration level of Yukmi. With this 510.0mg/100g concentration level of Yukmijiwhangtanggamibang, the following conclusion was derived from the measurement of the serum levels of glucose, ALP, GOT, GPT, creatinine, and BUN concentration for the streptozotocin injection date of each 4th, 11th, and 18th day. Results : 1. In the measurement for each concentrations. the glucose concentration level in the serum significantly decreased on the 9th day in the Yukmi group. 2. In the measurement for each concentrations, the creatinine concentration level in the serum significantly decreased on the 9th day in the Yukmi group. 3. In the measurement for each dosage dates, the glucose concentration level in the serum significantly decreased on the 18th day in the Yukmi group to which 510.0mg/l00g administrated. 4. In the measurement for each dosage dates, the got concentration level in the serum significantly decreased on the 18th day in the Yukmi group to which 510.0mg/100g administrated. 5. In the measurement for each dosage dates, the creatinine concentration level in the serum significantly decreased on the 18th day in the Yukmi group to which 510.0mg/l00g administrated. Conclusion : Yukmi that is Yukmijiwhangtang with Liriopis Tuber, Amoni Fructus, Citri Pericarpium, Zizyphi Spinosae Semen, Drynariae Rhizoma, Ephedrae Herba, Ginseng Radix and Phellodendri Cortex, is known to have effects to lessen the damages on renal function and liver function without causing damages on liver and kidney.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.3
• /
• pp.486-492
• /
• 2018

Black carbon concentrations were measured along the altitude at various locations using a drone coupled with a small black carbon detector. The measurement locations are Eunseok Mountain, downtown, four places in KOREATECH campus, Byeongcheon, Cheonan, Chungcheongnam-do, and Chungbu Expressway in Ochang-eup, Cheongju, Chungcheongbuk-do. The average concentration of black carbon measured in Eunseok Mountain was $1.64{\mu}g/m^3$ and the average concentration near the Chungbu Expressway was measured to be $3.86{\mu}g/m^3$. The average concentrations of four places inside campus ranged from 1.37 to $2.67{\mu}g/m^3$. The concentration of black carbon at all places tended to be slightly decreased according to the altitude, but the influence of pollution source, geometry, wind speed, and wind direction are thought to be larger than the effect of altitude. Effect of air flow caused by drone flight on the measurement of black carbon were investigated and it resulted in that the measurement of BC concentration was affected by less than 5%.

• 한국연소학회:학술대회논문집
• /
• 2000.12a
• /
• pp.168-174
• /
• 2000

A diode laser sensor system based on absorption spectroscopy techniques has been developed to measure $CO_2$ concentration and temperature non-intrusively in high temperature combustion environments using a 2.0 ${\mu}m$ DFB(Distributed Feedback) laser. Two optics was fabricated in pig-tail fashion and all optical components were implemented in a single box. The evolution of measurement sensitivity was done using test cell by changing sweep frequency and $CO_2$ concentration. Gas temperature was determined from the ratio of integrated line strengths. Species concentration was determined from the integrated line intensity and the measured temperature. The result show that the system has 2% error in wide operation frequency range and accuracy of $CO_2$ concentration was about 3%. The system was applied to measure temperature and concentration in the combustion region of a premixed $CH_4$ +air triangular flame. The measurement results of gas temperature agreed well with thermocouple results. Many considerations were taken into account to reduce optical noise, etalon effect, beam steering and base line matching problem. The evaluations results and actual combustion measurement demonstrate the practical and applicability for in-situ and real time combustion monitoring in a practical system.

• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.5
• /
• pp.389-394
• /
• 2019

In order to determine the location of average concentration and distribution status of dissolved oxygen in the rectangular aeration tank of the sewage treatment plant was analyzed and the difference of dissolved oxygen concentration was remarkable at each location. Compared with the computational fluid dynamics analysis, it was found that the results were consistent with the measurement results by showing the difference of dissolved oxygen concentration between the locations. Based on the measured data, the representative location of dissolved oxygen in aeration tank was selected by using statistical analysis method and the representative location was expressed in three-dimensional coordinates(LWH : 25%, 50%, 33%) from flow direction and left wall. Also the difference between the dissolved oxygen concentration at the actual measurement location and the average concentration value of the entire aeration tank was founded, and the equations for calibrating the automatic measurement data considering the actual measurement location were calculated.

• Journal of ILASS-Korea
• /
• v.26 no.4
• /
• pp.212-218
• /
• 2021

The present study aims to develop the Surface Plasmon Resonance (SPR) imaging system facilitating the real-time measurement of the concentration of evaporating binary mixture droplet (BMD). We introduce the theoretical background of the SPR imaging technique and its methodology for concentration measurement. The SPR imaging system established in the present study consists of a LED light source, a polarizer, a lens, and a band pass filter for the collimated light of a 589 nm wavelength, and a CCD camera. Based on the Fresnel multiple-layer reflection theory, SPR imaging can capture the change of refractive index of evaporating BMD. For example, the present study exhibits the visualization process of ethylene glycol (EG)-water (W) BMD and measures real-time concentration change. Since the water component is more volatile than the ethylene glycol component, the refractive index of EG-W BMD varies with its mixture composition during BMD evaporation. We successfully measured the ethylene glycol concentration within the evaporating BMD by using SPR imaging.