• 대한인간공학회지
• /
• 제32권1호
• /
• pp.9-16
• /
• 2013

Objective: The aim of this study is to investigate a trend of human error types observed in a series of verification and validation experiments for an Advanced Control Room(ACR) equipped with Lager Display Panel(LDP), Work Station Flat Panel Display(WS FPD), list type Alarm System(AS), Soft Control(SC) and Computerized Procedure System(CPS). Background: Operator behaviors in a fully computerized control room are quite different from those in a traditional hard-wired control room. Operators in an ACR all together monitor plant status and variables through their own interface system such as LDP and WS FPD, are notified of abnormal plant status through their own list type AS, control the plant through their own SC, and follow the structured procedure through their own CPS whereas operators in a traditional control room only separately do their duty directed by their supervisor. Especially the secondary task such as manipulating the user interface of ACR can be an extra burden to all the operators including the supervisor. Method: The Reason's human error classification method was applied to operators' behavioral data collected from a series of verification and validation experiments where operators showed their plant operational behaviors under a couple of harsh scenarios using the ACR simulator. Results: As operators accustomed to the new ACR system, knowledge or rule based mistakes appearing frequently in the early series of experiments decreased drastically in the latest stage of the series. Slip and lapse types of errors were observed throughout the series of experiments. Conclusion: Education and training can be one of the most important factors for the operators accustomed to the traditional control room to be adapted to the new system and to run the ACR successfully. Application: The results of this study implied that knowledge or rule based mistakes can be reduced by training and education but that lapse type errors might be reduced only through innovative improvement in human-system interface design or teamwork culture design including a new leadership style suitable for ACR.

• 대한족부족관절학회지
• /
• 제16권1호
• /
• pp.53-57
• /
• 2012

Purpose: To study computerized measurements of angular parameters on 100% and 150% resized digital radiography of hallux valgus deformity Materials and Methods: 30 digital radiography of standing foot anteroposterior view of hallux valgus patients were included. Two observers(A, B) independently measured hallux valgus angle (HVA), 1-2 intermetatarsal angle (IMA), and distal metatarsal articular angle (DMAA) in two times on both 100%-size and 150% magnified images respectively, using computerized measurement software tools. The results were interpreted with the statistical software program, Statistical Analysis System, version 9.2. Results: In repeated measurements of each observer, measurements on 150% magnified image showed no differences of all three parameters and with 100%-size image, there were differences of HVA (observer A) and 1-2 IMA (observer B) (p>0.05). When testing interobserver reliability, both observers showed differences in measurement of HVA and DMAA (p<0.05), but no differences in measurement of 1-2 IMA in both images. Within the 95% confidence interval, limits of error of measurements between two observers on HVA, IMA and DMAA were $2.7^{\circ}$ $1.4^{\circ}$ and $5.0^{\circ}$ respectively in 100%-size images, and $2.6^{\circ}$, $1.6^{\circ}$ and $4.7^{\circ}$ respectively in 150% magnified images. Conclusion: In computerized measurements for angular parameters of hallux valgus with digital radiography, 150% magnified images showed intraobserver reliability. Both 100% and 150% magnified images failed to show interobserver reliability. Measurement of 1-2 IMA in both 100% and 150% images showed less interobserver error.

• 한국의료질향상학회지
• /
• 제19권1호
• /
• pp.64-72
• /
• 2013

Objective: To improve customer satisfaction through accurate information using computerized automation of the test reservation system and by performing all fasting tests on the same day with one fasting. Methods: Quality improvement activities of the test reservation system of Seoul National University Bundang Hospital improves internal and external customer satisfaction at the time of test scheduling by having the reservation system reflect test order and test time automatically and making the system to increase the same day test reservation rate. Results: Test process was smooth due to accurate test reservation and information based on test priority due to the introduction of the computerized test reservation system. Internal and external customer satisfaction improved due to the marked reduction in time required for making a reservation thanks to the improvement of work process. Conclusion: Building a computerized test reservation system was an effective measure to improve external and internal customer satisfaction.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2280-2285
• /
• 2011

As the prefecture railroad construction accelerates, unmanned system's reliability and safety is increasing in demand. Accordingly, effective management of construction projects for the PM and SE techniques are being applied, with the introduction and use of PMIS computerized systems. Due to the construction of railways, from the start of PMIS research planning, design, procurement, to construction and commissioning, various expertise is being carefully gathered, and by integrating it into the unified budget ideas and processes, rational, efficient, organized, and manageable financial plans are developed for the computerized system. However, the current PMIS does not take into account the life-cycle. This study is to bring attention to the BIM smart BOM-based configuration management for life-cycle through the consideration for railway construction project management.

• 대한산업공학회지
• /
• 제12권2호
• /
• pp.1-11
• /
• 1986

This study is concerned on computerized analysis of COG, torques and EMG amplitudes in weight-lifting motion. The results show that; (1) torques on major joints show a rather consistent relationship with respect to the sequence of four distinct motions in weight-lifting, (2) analysis of EMG amplitudes is a sensitive measure of both athlete's skill and his potential capability, and (3) range of COG variations can be used as indicator of motion stability, existence of undesirable posture, and target muscle for intensive training. A computerized routine, which includes analyses on COG, EMG and torque, is a scientific tool for coaching athletes. In addition, an Expert System which includes CAD routine was developed in order to promote better understanding for athletes and coaches.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.159-162
• /
• 1997

Since customer's demand is various and product life cycle is getting shorter, many manufacturing company is trying to reduce product development time and cost. For that reason they make an effort to design product on collaborative environment. The various activities in a product development are highly distributed. This distributed nature of the activities implies that teams will be working indifferent place and technical environments. Thus at a given time, teams might work on he same product from different perspectives. This will require efficient communication amongst the various individuals and the various softwaretools that are used by them. Therefore, there is a need for a computerized frame work that can support distributed design such that participants from different backgrounds collaborate towards one common goal. This paper presents the architecture of a collaborative design system. It then reports on the study of computerized frame work focused on collaboration for product development.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.275-276
• /
• 1998

In this paper, we present the software on the development of the computerized imaging system for diagnosis and treatment plannig of orthodontics and orthognathic surgery. Soft tissue changes followed by orthognathic surgery mainly depends on surgical movements of hard tissue. Then, the stepwise multiple regression method was used to investigate the soft tissue changes followed by hard tissue changes. As a result of this research, we were able to develop a system which diagnoses automatic X-ray images and predicts soft tissue changes after othognathic surgery.

• 한국시뮬레이션학회논문지
• /
• 제8권2호
• /
• pp.87-100
• /
• 1999

A manufacturing environment without a computerized system causes numerous problems, since many important decisions are made based on the experience of veteran staffs. Especially, when a strategy for the improvement of manufacturing efficiency is considered, it is hard to predict the effect of the strategy. A solution to the problem without large investment of the computerized system is the simulation study. This paper shows the modeling and simulation based on DEVS(Discrete Event System Specification). Two types of models are implemented, one for representing the current production strategy and the other for the new strategy. The new strategy is expressed as priority rules within the model. The process in concern is the metal grating production process in which the size of the group, for applying a specific cutting and scheduling strategies, is one of the important factors in improving the production efficiency. Some reliable criteria for the evaluation related to the production effeciency are established from the simulation study.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 춘계학술대회 및 창립 30주년 심포지엄(논문집)
• /
• pp.215-220
• /
• 2006

해양오염의 가장 큰 오염원은 선박에 실린 기름들이다. 근래에 들어 HNS(Hazardous and noxious substances)로 명명하는 유해위험물질의 운반이 점차 증가함에 따라 국가적으로 기름만을 해양오염의 방제 대상으로 두지 않고 유해위험물질을 모두 해양오염 및 인명안전에 관계된다는 것에 관심사를 집중시키고 있다. HNS 물질의 해양 사고 발생 시 가장 중요한 것은 얼마나 신속하고 정확하게 반응을 하는가 하는 것이 중요한 관점이다. 이러한 중요한 사항을 위한 결정을 위해 필요한 HNS 방제정보지원시스템의 구축에 대해서 소개하고자 한다.

• 한국조경학회지
• /
• 제39권5호
• /
• pp.76-90
• /
• 2011

조경 도면이 전산화되면서 레이어의 표준화에 대한 요구가 증가하고 있다. 그러나 식재도면에 비해 조경시설물 도면의 레이어 분류 체계 정립은 늦어지고 있다. 이에 본 연구는 조경 시설물 전산 도면의 레이어 분류체계를 정립하는 것을 목적으로 하였다. 연구의 시작단계에서 "건설 CALS/EC전산도면 작성표준 v1. 1"과 "전자설계도서 납품지침"은 시설물 도면에 적합하지 않은 레이어의 분류체계로 되어 있는 것을 발견하였다. 10개 조경설계사무소에서 작성된 1,154개 도면을 수집하여 레이어의 작성 실태를 분석하였다. 분석결과, "건설 CALS/EC전산도면 작성표준"이 조경시설물 도면에 도입되지 않고, 레이어의 46%가 불명확하게 작성되고 있음이 밝혀졌다. ISO의 건설정보 분류체계를 적용하여 15개의 항목으로 구성된 레이어 분류 체계가 도출되었다. 본 연구에서 제시된 레이어 분류체계는 실무진이 참조하는 법률, 조경설계 기준, 조경공사표준시방서, 공공기관의 설계지침 등을 근거로 설정되었다. 이로 인해 새로운 레이어 분류체계가 조경설계 사무실에서 조기에 정착될 것으로 기대된다.