• Korean Journal of Radiology
• /
• v.22 no.8
• /
• pp.1225-1239
• /
• 2021

During the past decade, researchers have investigated the use of computer-aided mammography interpretation. With the application of deep learning technology, artificial intelligence (AI)-based algorithms for mammography have shown promising results in the quantitative assessment of parenchymal density, detection and diagnosis of breast cancer, and prediction of breast cancer risk, enabling more precise patient management. AI-based algorithms may also enhance the efficiency of the interpretation workflow by reducing both the workload and interpretation time. However, more in-depth investigation is required to conclusively prove the effectiveness of AI-based algorithms. This review article discusses how AI algorithms can be applied to mammography interpretation as well as the current challenges in its implementation in real-world practice.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.2
• /
• pp.1089-1104
• /
• 2017

We have developed an information management tool for the EDISON (EDucation-research Integration through Simulation On the Net) open platform. EDISON is, at present, a web-based simulation service for education and research in five computational areas, namely, nanophysics, fluid dynamics, chemistry, structural dynamics, and computer aided optimal design. The EDISON open platform consists of three tiers: EDISON application framework, EDISON middleware, and EDISON infra-resources. The platform provides web portals for education and research in areas such as computational fluid dynamics, computational chemistry, computational nanophysics, computational structural dynamics, and computer aided optimal design along with user service. The main purpose of this research is to test the behavior of the release version of the EDISON Open-Platform under normal operating conditions. This management tool has been implemented using the RESTful API designed in EDISON middleware. The intention is to check co-operation between the middleware and the infrastructure. Suggested tools include User management, Simulation and Job management, and Simulation software (i.e., solver) testing. Finally, it is considered meaningful to develop a management tool that is not supported in other web-based online simulation services.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.12
• /
• pp.1563-1572
• /
• 2001

Information wave of 21th century industrial society being undergone a change to knowledge post-industrial society new sense of values and life require. Also, computer is interacting, and adapts spontaneously in current enemy these age by important means on information-oriented society that change rapidly and computer-aided education is essential to improve country competitive power. Grasp computer education actual conditions of vocational high school for positivity that is industrial technology that IT base knowledge information-oriented society requires in this research hereupon, and though students' profession preference wishes to supply pabulum in course education presenting improvement direction of more efficient computer-aided education through investigation, there is the purpose. In present school curriculum, satisfaction about computer connection education responded that have interest much very appeared in general high. Also, computer connection profession preference was expose that research results keep in step and prefers most Information Communication Technology (ICT) field and multi media field that is embossed newly in post-industrial society.

• Korean Institute of Interior Design Journal
• /
• no.12
• /
• pp.40-49
• /
• 1997

What's the direction of INTERIOR ARCHITECTURAL DESIGN in 21 Century High Tech\ulcorner The purpose of this research is to show not only practical use of Computer Graphic(CG) as simple tool function, but offering conversation with computer and other ways of method. When we consider poor CG market, investment on the research of VR(Virtual Reality) is the most urgent. The investment on VR will solve various problems. Firstly. It will solve the problems drived from Interior design process by making spatial images like reality. Secondly, It will solve high wages and financial difficulties caused by raise cost funds. Thirdly, It prevents in a road from foreign company that will bring enormous program, caused by opening the domestic market. Also, It help interior designer check in advance the problems in constructure through showing him a supposed imagination including the system and location of equipments. But it is reality that even ordinary American can't offer VR(Virtual Reality) System. We should have noted that it is normal to spend 10 billion won for such presentation as Model House in the large corporation. We must acknowledge that it is such a waist of money nationally. Therefore, investment on CG & VR System is essential in order to save cost more effective presentation & interior design. We will see great result within a year. As we can see, there is huge area we have make develop. One of them is specific technical plan on VR System and study of flow chart. We close with simple methodological way to use VR System and will study Computer System. Which is fitting to CG that we have to solve the link of hardware and software on VR System\ulcorner We know from the cases in other countries that continuous research on this subject has great value for Interior Architectural Design and its effective use. When we try hard not only for methodological use but practical use, the purpose of CG and VR System will be a factor to contribute on this subject for better Interior design & presentation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.9
• /
• pp.941-946
• /
• 2011

The Loran-C, a radio navigation system based on TDOA measurements is enhanced to eLoran using TOA measurements instead of TDOA measurements. Many error factors such as PF, SF, ASF, clock errors and unknown biases are included in eLoran TOA measurements. Because these error factors can cause failure in eLoran navigation algorithm, these errors must be compensated for high accuracy eLoran navigation results. Compensation of ASF and unknown biases are difficult to calculate, while the others such as PF and SF are relatively easy to eliminate. In order to compensate all errors in eLoran TOA measurements, a simple GPS aided bias compensation method is suggested in this paper. This method calculates the bias as the difference of TOA measurement and the range between eLoran transmitters and the receiver whose position is determined using GPS. The real data measured in Europe are used for verification of suggested method and navigation algorithm.

• Journal of Acupuncture Research
• /
• v.40 no.1
• /
• pp.44-52
• /
• 2023

Background: Previous studies have investigated technology-aided needling training systems for acupuncture on phantom models using various measurement techniques. In this study, we developed and validated a vision-based needling training system (noncontact measurement) and compared its training effectiveness with that of the traditional training method. Methods: Needle displacements during manipulation were analyzed using OpenCV to derive three parameters, i.e., needle insertion speed, needle insertion angle (needle tip direction), and needle insertion length. The system was validated in a laboratory setting and a needling training course. The performances of the novices (students) before and after training were compared with the experts. The technology-aided training method was also compared with the traditional training method. Results: Before the training, a significant difference in needle insertion speed was found between experts and novices. After the training, the novices approached the speed of the experts. Both training methods could improve the insertion speed of the novices after 10 training sessions. However, the technology-aided training group already showed improvement after five training sessions. Students and teachers showed positive attitudes toward the system. Conclusion: The results suggest that the technology-aided method using computer vision has similar training effectiveness to the traditional one and can potentially be used to speed up needling training.

• Journal of Advanced Marine Engineering and Technology
• /
• v.11 no.3
• /
• pp.53-60
• /
• 1987

Steam ejector is a equipment which compresses the gases to desired discharge pressure. It is widely used for the evacuation systems because of its high working confidence. And recently it is used as the thermo-compressors in the various energy saving systems. Steam ejector is constructed of three basic parts; a suction chamber, a motive nozzle and a diffuser. The high velocity stream jet of steam emitted by the motive nozzle creats suction chamber, which draws the low pressure gases. The diffuser converts the kinetic energy of high velocity flow to pressure energy. It is not easy to determine the dimensions of a steam ejector met to the desired design condition, because that the expected suction rates must be obtained by reapeating the complicate calculation. And also such a calculation is concomitant with geometrical analysis for suction part and diffuser based on the stability of steam flow. Therefore, it is considered that the Computer-Aided Design (CAD) of steam ejector is a powerful design method. In this paper, computer program for steam ejector design is developed based on the theoretical research and the previous experimental results. And the determinating method of diffuser inlet angle and the velocity development profile of suction gas along to the diffuser are suggested. The validity of the development profile of suction gas along to the diffuser are suggested. The validity of the developed computer results with other's for the practical design calculation of a manufactured steam ejector.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1991.10a
• /
• pp.261-267
• /
• 1991

다품종소량생산의 특징을 갖고 있는 금형공업에서 컴퓨터통합생산시스템(Computer Integrated Manufacturing System;CIMS)의 실현을 위한 중요한 분야의 하나는 부품설계도면으로부터 최종제품을 생산하는데 필요한 공정계획의 자동화, 즉 컴퓨터를 이용하여 공정계획을 자동적으로 생성하는 자동공정계획시스템(Computer Aided Process Planning;CAPP) 기술의 개발이다. 국내외적으로 CAPP분야의 연구는 컴퓨터 지원에 의한 자동화 기술의 급속한 발전과 더불어 지난 20여년 동안에 기계가공품에 관한 CAPP은 약 150여가지가 개발되었으나, 이는 컴퓨터 지원에 의한 설계의 자동화(Computer Aided Design;CAD)나 컴퓨터 지원에 의한 제조의 자동화(Computer Aided Manufacturing;CAM)분야에 비해 상대적으로 저조한 형편이다. 특히 금형을 대상으로 한 CAPP시스템의 개발은 아직 초기단계에 있기 때문에, 본 연구에서는 사출금형을 대상으로 하여 실용성이 있는 공정설계시스템을 개발함을 목적으로 한다. 일반적으로 공정계획은 "소재로부터 제품을 경제적, 효율적으로 생산하는데 필요한 제조공정의 체계적인 결정"이라고 정의할 수 있다. 공정계획은 제품의 종류와 수량, 재료와 부품의 종류, 보유 생산설비와 제조기술의 수준에 따라 다르나, 공정설계(Process Design)와 작업설계(Operation Design)로 구분할 수 있다. 본 연구에서는 공정계획을 광의의 공정설계로 정의하고, 공정설계와 공정계획을 동의어로 통용토록 한다. 기존의 CAPP시스템의 개발에 관한 기본적인 접근방법은 변성형방법(Variant method), 창성형방법(Generative method) 및 자동화방법(Automatic method)이 있다. 이들 CAPP시스템을 개발할 때 사용하는 기법은 크게 5가지- (1) GT(group Technology) 접근기법, (2) Bottom-up 접근기법, (3) Top-down 접근기법, (4) AI와 전문가시스템(Expert System) 접근기법, (5) 컴퓨터 프로그래밍 언어 - 로 분류할 수 있다. 본 연구에서는 전문가시스템 기법을 도입해서 사출금형 공정계획전문가의 지식과 경험을 획득하여 지식베이스를 구축하고, 전문가시스템 셀(shell)중 CLIPS를 이용하여 자동공정계획시스템인 Mold CAPP을 개발하였다.PP을 개발하였다.

• ETRI Journal
• /
• v.43 no.2
• /
• pp.260-271
• /
• 2021

This paper addresses Very large-scale integration (VLSI) placement optimization, which is important because of the rapid development of VLSI design technologies. The goal of this study is to develop a hybrid algorithm for VLSI placement. The proposed algorithm includes a sequential combination of a genetic algorithm and an evolutionary algorithm. It is commonly known that local search algorithms, such as random forest, hill climbing, and variable neighborhoods, can be effectively applied to NP-hard problem-solving. They provide improved solutions, which are obtained after a global search. The scientific novelty of this research is based on the development of systems, principles, and methods for creating a hybrid (combined) placement algorithm. The principal difference in the proposed algorithm is that it obtains a set of alternative solutions in parallel and then selects the best one. Nonstandard genetic operators, based on problem knowledge, are used in the proposed algorithm. An investigational study shows an objective-function improvement of 13%. The time complexity of the hybrid placement algorithm is O(N2).

• Archives of design research
• /
• v.11
• /
• pp.84-93
• /
• 1995

The paper aims to identify major research issues and basic framework of computer supported collaborative work in design through reviewing recent changes in product development which is getting more integrated, collaborative and computerized. At first the importance of collaborative work in design is discussed throughout the development of design process: from blackbox approach in vernacular design to recent Nigel Cross' es Hybrid model. Then Concurrent Engineering and Quality Function Depolyment are reviewed for showing recent phenomena of integration and collaboration in the process of product development. Computer-aided product development is demonstrated with the case of Blackboard system and Computergenerated form development. In order to outline the fundamental approach for computer-supported collaborative work in design, structures and processes of some related projects are introduced. Finally, based on the findings, some research issues for further rJevelopment are proposed.