• Journal of electromagnetic engineering and science
• /
• v.6 no.1
• /
• pp.10-17
• /
• 2006

For the sake of the potential ability of overcoming interference in TD-SCDMA(time division-synchronous code division multiple access) systems, pilot signal is adopted, but the presented TD-SCDMA protocol has not considered the Rake technique for their mobile terminals. This paper developed a RAKE receiver algorithm and an implementation circuit, which make use of the pilot signal in the burst structure of the TD-SCDMA base station to estimate main channel parameter(channel delays) in the downlink of TD-SCDMA wireless network. The algorithm can reduce multipath interference for the mobile units in multiusers' case. Theoretic performance analysis presented in the paper and computer simulations show that there is a range of BER for Rake receiver and confirm that the proposed RAKE receiver algorithm achieved a better performance under multipath fading propagation and multiusers conditions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1962-1967
• /
• 2013

Recently our lives have become more convenient as a development of smart phones. For this reason, smart phone users have increased rapidly as well. However existing built-in functions in smart phone are not fully supported variety of currently released applications. So Appcessories that combines mobile handsets and accessories is attracting the notice of smart phone users. In this paper, we design and implement remote control Appcessories using Bluetooth communication. Also we verify a robustness of mobile terminals and system hardware and convenience of using applications by applying it to the infant car system.

• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.66-73
• /
• 2016

The quantity of alternating current (AC) leakage and the value of distortion factor in capacitor currents are discussed with regard to a new power component called variable capacitance device (VCD). This component has terminals for controlling its capacitance. Nonlinear dielectric characteristics are utilized in this device to vary the capacitance. When VCD operates in an AC circuit, the AC leakage from this device through direct current (DC) control voltage source increases according to the conditions of DC control voltage and so on. To solve this problem, we propose techniques for suppressing AC leakage. Although VCD has strong nonlinear characteristics, the current through the capacitor is not distorted significantly. The relations between AC leakage and the distortion in current waveforms are investigated. An application example for an AC power regulator is also introduced to evaluate the distortion in waveforms.

• Annual Conference of KIPS
• /
• 2002.04b
• /
• pp.1559-1562
• /
• 2002

This paper proposes what MASTER/SLAVE design and implementation of the WAP Gateway in currently implemented Internet and CDMA Infrastructure environment to provide mobile content service to mobile terminals such as PDA, handhold computer, and notebook. We can see the local WAP network by using the CDMA emulator of the Racal Instrument mobile solution provider.

• Journal of Information Processing Systems
• /
• v.13 no.1
• /
• pp.104-113
• /
• 2017

In this paper, we present an approach to transmit data from the source to the destination through a minimal path (least-cost path) in a computer network of n nodes. The motivation behind our approach is to address the problem of finding a minimal path between the source and destination. From the work we have studied, we found that a Steiner tree with bounded Steiner vertices offers a good solution. A novel algorithm to construct a Steiner tree with vertices and bounded Steiner vertices is proposed in this paper. The algorithm finds a path from each source to each destination at a minimum cost and minimum number of Steiner vertices. We propose both the sequential and parallel versions. We also conducted a comparative study of sequential and parallel versions based on time complexity, which proved that parallel implementation is more efficient than sequential.

• Proceedings of the Optical Society of Korea Conference
• /
• 1989.02a
• /
• pp.113-118
• /
• 1989

By using the single mode optical fiber, we fabricated Fiber-optic Fabry-Perot interferometer (FFPI). The change over a wide range in the optical path length of a FFPI is observed. The temporal movement of the interference fringes by external condition to P.Z. T) is converted to circular motion on an oscilloscope display and then recorded with a micro-computer. The two output voltages of the D/A converters are applied to X and Y terminals of oscilloscope to display circular motion on oscilloscope. Thus the direction of phase shift can be determined with observing the direction of circular motion. The variation of the optical length can be measured by calculating the angle of spot of circle with an accuracy of λ/90 wave length due to variation of temperature in this system 2.7x10-4$^{\circ}C$.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.4
• /
• pp.557-564
• /
• 1986

This paper describes a standard cell placement strategy which consists of three kconsecutive steps` initial placement, iterative placement improvement, and string placement. In the initial placement step, cell placement was done by solving the linear ordering problem for a one-dimensional layout of standard cells and then zigzaging the resultant linear order width in the chip plane. The iterative placement improvement step is based on the iterative pairwise interchange using the estimated total routing length as a figure-or -merit. The string placement is used to reorder cells and terminals in each etandard cell row such that channel routing in the adjacent channels is not blocked by cyclic constraints and needs fewer routing tracks. The placement program is coded in PASCAL and kimplemented on a VAX-11/750 computer. Experimental results for several examples are included.

• International journal of advanced smart convergence
• /
• v.11 no.4
• /
• pp.41-46
• /
• 2022

This study is a Ku-band array antenna for the manufacture of low-orbit satellite communication terminals, designed to have miniaturization, high gain, and wide beam width. The transmission of low-orbit satellite communication has a right-rotating circularly polarized wave, and the reception has a left-rotating circularly polarized wave. The 4×8 array antenna was separated for transmission and reception, and it was combined with the RF circuit part of the transmitter and receiver, and was terminated in the form of a waveguide for RF signal impedance matching in the form of a transition from the microstrip line to the waveguide. The 30° beam width of the receiver maximum gain of 19 dBi and the 29° beam width of the transmitter maximum gain of 18 dBi are shown. Through this antenna configuration, the system was configured to suit the low-orbit satellite transmission/reception characteristics.

• Journal of Intelligence and Information Systems
• /
• v.12 no.3
• /
• pp.47-65
• /
• 2006

These days, the number of automated container terminals is increasing to encourage the productivity of the container terminal inside and outside of the country. So far, there have been a lot of researches on the operating one type of equipments in a container terminal. However, there is still room for further improvement as none of equipment works itself but cooperate each other to finish a job, which means synchronization among the equipments is necessary. Among lots of equipments in a terminal, this paper concerns with the operation of ATCs (Automated Transfer Crane) and YTs (Yard Truck). The purpose of this paper is to find the efficient heuristic methods for operating ATCs and YTs that can set up a schedule in a real time. Moreover, using simulation this paper shows the efficient stacking strategy to decide the location of containers to be put and the proper selection range of YTs.

• Journal of Convergence for Information Technology
• /
• v.11 no.11
• /
• pp.23-30
• /
• 2021

Due to the recent advancements of mobile telecommunication technology and high mobile phone penetration rate, researches on emergency text alert service for enhancing the accessibility have been actively conducted. The worldwide spread of COVID-19 further accelerates the efforts for the alert services. Existing emergency text services are simple and efficient. However, unclear reception area may cause unintended alert messages frequently. In this paper, we analyze survey results regarding the 5G-based text-alert services to derive service requirements for technological advancement. Then we propose an emergency disaster text service scenario using Active Geo-Targeting that enables active disaster text reception of terminals. In addition, we newly define an interface protocol that is CIB(Control Information Block) to operate the proposed scenario.