• Economic and Environmental Geology
• /
• v.14 no.2
• /
• pp.77-91
• /
• 1981

An airborne magnetometer survey was carried out over an offshore area of about $200,000km^2$ from the southeastern, southern and western part of Korea. Detailed magnetic studies on the geological structure of the southern part of above area ($100,000km^2$) was accomplished. Residual aeromagnetic map was made in order to delineate magnetic provinces, magnetic lineaments and sedimentary basins by application of least square method using computer system. To determine the depth of the sedimentary basins pseudo-gravimetric method was applied. 1. The area studied is divided into four magnetic provinces for the purpose of interpretation on the basis of the magnetic maps. 2. Near shore area and its attached islands of southern part (fiirst and second magnetic province) can be regarded as being the extension from the land geology due to presentation of strong magnetic anomalies and shallow magnetic basements. 3. Magnetic lineament 1-1 is strong magnetic anomalous region which is presumably relevant to volcanic activities in Cretaceous. The depth of magnetic basement of the lineament was determined to 1,500 m. Negative magnetic anomalous zones B1-1 and B1-2 which represent Tertiary basins showed depth of magnetic basement 3 km and 4 km each. The latter can be interpreted as extension of the Taiwan basin which is consisted of Tertiary sediments. 4. Magnetic lineament 2-1 coincide with Rainan-Fukien massif running NE-SW direction. A lineament located in central part of magnetic lineament 2-1 is well connected with extension of Sobacksan anticlinal axis on land. Volcanic rocks in Gyongsang system concentrated along this lineament. 5. The characteristics of magnetic pattern in the southern Yellow sea basin of western part of Jeju island show weaker magnetic anomalies and deeper magnetic basements than first and second magnetic provinces indicating geological structure of this basin seems to be quite different from that of Jeju strait. 6. In southern part of Jeju island, smoother magnetic pattern develope southward. Maximum depth of magnetic basement in sedimentary basins BIV-1 and BIV-2 were determined down to 6,000 m increasing its thickness toward Taiwan up to 11,000 m in the shelf area off Taichung, Taiwan. Judging from the fact that hydrocarbon was founded in the Tertiary sediments of western coastal area of Taiwan, it can be expected that hydrocarbon will be existed in these sedimentary basins of southern part of Jeju island.

• Journal of Internet Computing and Services
• /
• v.14 no.6
• /
• pp.59-70
• /
• 2013

With advances in information and communication technologies, many innovative technologies have been developed. Those technologies are changing every aspect of our daily life. Especially smart technologies are changing our life dramatically. Smart devices such as tablet PCs and smart phones are used in education so that new concept called "smart learning" is created and used. Currently smart learning becomes popular in accordance with wide distribution of smart devices and smart contents in schools. In order to compare and check the current status and progress of individuals in smart environment, we need smart literacy standards. However, there has been only few works for smart literacy standards for teachers and students. Also, those standards need to be improved. The purpose of this paper is to develop smart literacy standards for teachers and students in smart learning environment. The proposed literacy standards are developed based on the existing ICT literacy standards. In this work, smart literacy standards consist of four main areas, smart education, smart knowledge, smart application, and smart ethics, respectively. For development of smart literacy, wide experts from teachers, professors, and researchers are selected and surveyed. Their responses are analyzed using through statistical analysis so that final smart literacy standards are obtained.

• Journal of Food Hygiene and Safety
• /
• v.26 no.4
• /
• pp.377-382
• /
• 2011

This test was performed to evaluate the acute oral toxicity and skin irritation of Lamia-Kill$^{(R)}$, disinfectant, containing 20% benzalkonium chloride and 10% citric acid. In acute oral toxicity, Lamia-Kill$^{(R)}$ was orally administered at dose levels of 2,000, 1,000, 500, 250 and 0 mg/kg body weight. After single oral administration to both sexes of SD rats, the rats were observed for 14 days. In primary skin irritation test, New Zealand white rabbits were dermally treated with Lamia-Kill$^{(R)}$ for 24 hr and observed for 3 days. All rats treated with Lamia-Kill$^{(R)}$ were induced no toxic signs in mortalities, clinical findings, body weights and gross findings. Also, the disinfectant did not induce any adverse reactions such as erythema and edema on intact skin sites for the most part rabbits, but on abraded skin sites, some rabbits showed very slight erythema on 24 hr after topical application. With the results of this study, Lamia-Kill$^{(R)}$ have no effect on acute toxicity and side effect in SD rats and was classified as a practically non-irritating material based on the score 0.50 of primary irritation index.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.185-196
• /
• 1997

By considering the definition and application of resolution as well as the concept and theory of SAR, the essential contents of the SAR design and analysis are described. This paper is to compare and analyze the resolution performance capability of three techniques for achieving azimuth resolution such as the real aperture, the unfocused and the focused techniques, through the simulation. Simulation is performed to make the restricted conditions for the unfocused technique that can be implemented by the less commputing load of signal processingand the lower cost. Through the mission analysis, the use of SAR image can be applied for estimation of whole situation at the regional area in the field of military demands for tactical purpose as well as civilian demands for the damage of disaster. RPV and sall or medium aircraft are selected to carry the SAR for these purposes and the proper resolution turns ou 5~15 m. The trade-off study of variables through the simulations results in the proper conditions such that range is less 3, 000 m, Wavelength is 1~10 m, and the raw signals and results processed by three techniques for two point targets are exhibited undr such conditions. Therefore, at some points, the result of this paper si proposed for useful applications of unforcused technique in the restricted conditions except the identification of the small target at a long range re- quired for high resolution.

• Journal of Broadcast Engineering
• /
• v.25 no.4
• /
• pp.609-619
• /
• 2020

In accordance with a demand for high quality video streaming, it needs high data rate in limited bandwidth and more traffic congestion occurs. In particular, when providing real time video service, packet loss rate and bit error probability increase significantly. To solve these problems, a raptor code, which is one of FEC(Forward Error Correction) techniques, is pervasively used in the application layers as a method for improving real-time service quality. In this paper, we propose a method of determining image transmission parameters based on various deep neural networks to increase transmission efficiency at a similar level of image quality by using raptor codes. The proposed neural network uses the packet loss rate, video encoding rate and data rate as inputs, and outputs raptor FEC parameters and packet sizes. The results of the proposed method present that the throughput is 1.2% higher than that of the existing multimedia transmission technique by optimizing the transmission efficiency at a PSNR(Peak Signal-to-Noise Ratio) level similar to that of the existing technique.

• Investigative Magnetic Resonance Imaging
• /
• v.16 no.2
• /
• pp.103-114
• /
• 2012

Purpose : In an attempt to further improve the radiofrequency (RF) magnetic ($B_1$) field strength in temporomandibular joint (TMJ) imaging, a 4-channel spiral-loop coil array with RF circuitry was designed and compared with a 4-channel single-loop coil array in terms of $B_1$ field, RF transmit (${B_1}^+$), signal-to-noise ratio (SNR), and applicability to TMJ imaging in 7T MRI. Materials and Methods: The single- and 4-channel spiral-loop coil arrays were constructed based on the electromagnetic (EM) simulation for the investigation of $B_1$ field. To evaluate the computer simulation results, the $B_1$ field and ${B_1}^+$ maps were measured in 7T. Results: In the EM simulation result and MRI study at 7T, the 4-channel spiral-loop coil array found a superior $B_1$ performance and a higher ${B_1}^+$ profile inside the human head as well as a slightly better SNR than the 4-channel single-loop coil array. Conclusion: Although $B_1$ fields are produced under the influence of the dielectric properties of the subject rather than the coil configuration alone at 7T, each RF coil exhibited not only special but also specific characteristics that could make it suited for specific application such as TMJ imaging.

• The Journal of Art Theory & Practice
• /
• no.14
• /
• pp.87-124
• /
• 2012

This paper focuses on the social implication of new media art, which has evolved with the advance of technology. To understand the notion of human-computer interactivity in media art, it examines the meaning of "cybernetics" theory invented by Norbert Wiener just after WWII, who provided "control and communication" as central components of his theory of messages. It goes on to investigate the application of cybernetics theory onto art since the 1960s, to which Roy Ascott made a significant contribution by developing telematic art, utilizing the network of telecommunication. This paper underlines the significance of the relationship between human and machine, art and technology in transforming the work of art as a site of communication and experience. The interactivity in new media art transforms the viewer into the user of the work, who is now provided free will to make decisions on his or her action with the work. The artist is no longer a godlike figure who determines the meaning of the work, yet becomes another user of his or her own work, with which to interact. This paper believes that the interaction between man and machine, art and technology can lead to various ways of interaction between humans, thereby restoring a sense of community while liberating humans from conventional limitations on their creativity. This paper considers the development of new media art more than a mere invention of new aesthetic styles employing advanced technology. Rather, new media art provides a critical shift in subverting the modernist autonomy that advocates the medium specificity. New media art envisions a new art, which would embrace impurity into art, allowing the coexistence of autonomy and heteronomy, embracing a technological other, thereby expanding human relations. By enabling the birth of the user in experiencing the work, interactive new media art produces an open arena, in which the user can create the work while communicating with the work and other users. The user now has freedom to visit the work, to take a journey on his or her own, and to make decisions on what to choose and what to do with the work. This paper contends that there is a significant parallel between new media artists' interest in creating new experiences of the art and Jacques Ranci$\grave{e}$re's concept of the aesthetic regime of art. In his argument for eliminating hierarchy in art and for embracing impurity, Ranci$\grave{e}$re provides a vision for art, which is related to life and ultimately reshapes life. Ranci$\grave{e}$re's critique of both formalist modernism and Jean-Francois Lyotard's postmodern view underlines the social implication of new media art practices, which seek to form "the common of a community."

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.5
• /
• pp.396-401
• /
• 2016

Owing to developments in the internet of things, many products have developed and various researches have processed. Smart home systems in Internet of things area are receiving attention from many people than the other areas. Autonomous mobile robots perform various parts in many industries. In this paper, a smart housekeeping robot was implemented using internet of things and an autonomous mobile robot. In order to make a smart housekeeping robot, Raspberry Pi, wireless USB camera, and uBrain robot of Huins Corp. is used. To control the robot, cell-phone connected with IP of Raspberry Pi, and then Raspberry Pi connected with uBrain robot using Bluetooth. a smart housekeeping robot was controlled using commands of a cell-phone application. If some user wants to move a robot automatically, we implemented that a robot can be chosen an autonomous driving mode from the user. In addition, we checked a realtime video using a cell-phone and computer. This smart housekeeping robot can help user check their own homes in real time.

• Journal of Drive and Control
• /
• v.12 no.4
• /
• pp.60-70
• /
• 2015

A front-end loader (FEL) mounted on an agricultural tractor is one of the most commonly used implements for farm work. However, when the tractor carries material using the bucket attached to the FEL on a sloping ground, the materials can spill or roll back over the operator due to the tilted body, thereby requiring the bucket surface to remain level at a constant value regardless of varying slopes. In this study, an active system for controlling the angle of the FEL bucket on a tractor based on the real-time measurement of ground slopes was developed to enable the bucket to constantly remain level. A FEL simulator operated based on an electro hydraulic proportional valve (EHPV) was constructed in the laboratory to develop a proportional-integral-derivative (PID) controller forming a virtual electronic control unit (ECU) on the computer, which could automatically adjust the bucket angles depending on varying input angles while sending SAE-J1939 associated messages via CAN BUS to the EHPV. The different parameter values for the PID controller due to the gravity effect of the bucket were determined using a manual PID tuning method while assuming that the tractor travels on either an ascending slope or a descending slope. The developed PID control-based self-leveling system showed a mean of steady-state errors of within $1^{\circ}$ and a mean of delayed times of ~ 0.8s when the step input of $+20^{\circ}$ was given, implying that the developed system and control algorithm would be effective in maintaining the bucket angle at a certain value. Future studies include the improvement of the control algorithm to reduce such a time delay as well as the application of the developed algorithm to the FEL mounted on a tractor tested at a testing ground.

• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.409-414
• /
• 2007

The effect of multipath is especially serious in urban area and sea surface where buildings and water reflect GPS signal. Multipath brings about the performance degradation on many GPS application because the presence of multipath causes the diminution of pseudorange measurement accuracy in turn position accuracy. In this paper, a multipath mitigation named weighted correlation method is implemented on software GPS receiver, in which the asymmetric correlation function is compensated by modifying the late correlation value. Asymmetry compensation is obtained as weighted sum of two correlators which have different early-late chip spaces. This structure is adopted to lessen the computation load lower keeping up performance similar to that. The performance of implemented multipath mitigation technique is evaluated using GPS signal and multipath signal generated by GPS signal generator and software GPS receiver. The test results show that the weighted correlation method gives hefter performance than the standard correlator and the narrow correlator.