• Journal of the Korea Safety Management & Science
• /
• v.13 no.4
• /
• pp.71-79
• /
• 2011

The work environment of locomotive cabs has long been an important issue in the design of railload systems since it is quite critical in terms of system's operational safety. It is getting more attention as the running speed of the trains goes up these days. To this end, this paper describes how to systematically construct a DB for the requirements set in the course of the improvement process for the aforementioned cab work environment. As a solution approach, we have adopted the requirement architecture concept to cover the whole activities required to do such as in requirements generation, DB construction, change management, and traceability management. Specifically, based on the requirement architecture framework a requirement process to collect requirements for improvement is discussed, and the guide lines are suggested for verification and validation of the developed requirements. In addition, a base schema and requirements templates are developed, which will be used in generating requirements and constructing a DB. Finally, it is demonstrated how the requirements DB for locomotive cabs can be constructed using a computer-aided tool in an integrated fashion.

• Convergence Security Journal
• /
• v.10 no.4
• /
• pp.39-48
• /
• 2010

In a complex, secure IT system environment there will be groups of data that be segregated from one another, yet reside on the same system. Users of the system will have varying degrees of access to specific data. The Configuration Management(CM) of the information architecture, the physical architecture, user privileges and application security policies increases the complexity for operations, maintenance and security staff. This pager describes(current work to merge the capabilities of a network CM toll with those of a Computer Aided System Engineering(CASE) tool. The rigour of Systems Engineering(SE) modelling techniques can be used to deal with the complexities of multi-level information security. The SE logical and physical models of the same system are readily tailorable to document the critical components of both the information architecture and physical architecture that needs to be managed. Linking a user-friendly, physical CM tool with the extended capabilities of a CASE tool provide the basis for improved configuration management of secure IT systems.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.6
• /
• pp.89-96
• /
• 2007

It is well known that the test and evaluation plan (TEP) is very crucial in the successful development of safety-critical systems. As such, this paper discusses an approach to the development of the TEP for a system that should meet safety requirements in the systems development process. It is studied how to incorporate the result of preliminary hazard analysis (PHA) in generating the safety requirements. It is also discussed how to deal with them when the system requirements (i.e., functions, performance, constraints, components, etc) and the safety requirements are integrated into one model. While doing so, we have constructed the required traceability among them, which is necessary and very useful when the safety requirements need to be corrected or be changed. The use of the traceability makes it possible to easily check out whether and how the safety requirements are properly incorporated in the system design process. Furthermore, without the verified traceability, the system cannot be changed or upgraded later. In order to implement the model on a computer-aided tool, we have constructed a database (DB) schema. As a result, the implemented model/DB allows to automatically generate TEP which can be used to measure the performance and safety level of the developed system.

• Management Science and Financial Engineering
• /
• v.10 no.1
• /
• pp.77-96
• /
• 2004

In this paper, we present a dynamic matching methodology for the logistics brokerage agent that intermediates empty vehicles and freights registered to the logistics e-marketplace by car owners and shippers. In this matching methodology, two types of decisions should be made： one is when to match freights and vehicles and the other is how to match freights and vehicles at that time. We propose three strategies for deciding when to match, ie. real time matching (RTM) , periodic matching (PM), and fixed matching (FM) and use Hungarian method for solving the how-to-match problem. In order to compare the performance of the when-to-match strategies, computational experiments are done and the results show that the waiting-and-matching strategies, PM and FM, give better performance than real time matching strategy, RTM. We can expect that the suggested matching methodology may be used as an efficient and effective tool for the brokerage agent in the logistics e-marketplaces.

• Nuclear Engineering and Technology
• /
• v.49 no.6
• /
• pp.1189-1198
• /
• 2017

Computer-aided design (CAD)-based Monte Carlo radiation transport is of value to the nuclear engineering community for its ability to conduct transport on high-fidelity models of nuclear systems, but it is more computationally expensive than native geometry representations. This work describes the adaptation of a rendering data structure, the signed distance field, as a geometric query tool for accelerating CAD-based transport in the direct-accelerated geometry Monte Carlo toolkit. Demonstrations of its effectiveness are shown for several problems. The beginnings of a predictive model for the data structure's utilization based on various problem parameters is also introduced.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.2
• /
• pp.258-267
• /
• 2010

The necessity of the new system development arises in both defence and commercial systems industry either when a breakthrough in technology needs to be realized in the form of a brand-new system or when the existing product already in operation needs to be upgraded to satisfy the increasing stakeholder's requirements. In the latter case, it is not rare that specific system technical specifications on the existing products are not available. The purpose of this study is to investigate how to handle the difficulty when an upgraded system is required to be developed based on the existing product whose detailed technical specifications cannot be obtained. A step-by-step process is described based on the reverse engineering of the existing product. As a result, a logical system model is obtained for the product. The process developed is further enhanced and evaluated by the computer-aided system engineering tool. The resulting logical system model should be helpful in the next phase of the new product development.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.4
• /
• pp.179-185
• /
• 2012

When manufacturing die casting mold, generally, the casting layout design should be considered based on the relation among injection system, casting condition, gate system, and cooling system. Also, the extent or the location of product defects was differentiated according to the various relations of the above conditions. In this research, in order to optimize casting design of an automobile part (Gear Box) Computer Aided Engineering (CAE) was performed by using the simulation software (Z Cast). The simulation results were analyzed and compared with experimental results. During the mold filling, internal porosities caused by air entrap were predicted and reduced remarkably by the modification of the gate system and the configuration of overflow. With the solidification analysis, internal porosities caused by the solidification shrinkage were predicted and reduced by the modification of the gate system. For making a better production die casting tool, cooling systems on several thick areas are proposed in order to reduce internal porosities caused by the solidification shrinkage.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.357-362
• /
• 2002

Most of battery industries are growing explosively as a core strategy industry for the development of the semi-conductor, the LCD, and the mobile communication device. In this thesis, dynamic characteristics of the steel can labeling machine on the automatic cell assembly line are studied. Dynamic characteristic analysis consists of dynamic behavior analysis and finite element analysis and is necessary for effective design of machines. In the dynamic behavior analysis, the displacement, velocity, applied force and angular velocity of each components are simulated according to each part. In the FEA, stress analysis, mode analysis, and frequency analysis are performed for each part. The results of these simulations are used for the design specification investigation and compensation for optimal design of cell manufacturing line. Therefore, Virtual Engineering of the steel can labeling machine on the automatic cell assembly line systems are modeled and simulated. 3D motion behavior is visualized under real-operating condition on the computer window. Virtual Prototype make it possible to save time by identifying design problems early in development, cut cost by reducing making hardware prototype, and improve quality by quickly optimizing full-system performance. As the first step of CAE which integrates design, dynamic modeling using ADAMS and FEM analysis using NASTRAN are developed.

• IE interfaces
• /
• v.16 no.4
• /
• pp.473-484
• /
• 2003

In this paper we deal with the logistics brokerage process in which a logistics agent intermediates between vehicle owners and shippers for matching empty vehicles and freights. Based on the Multi-Criteria Decision Making (MCDM) methodology, the proposed agent system matches the most preferred empty vehicle to the shipper and the most preferred freight to the vehicle owner. In the proposed agent system, an MCDM based sensitivity analysis is also used for supporting decision makers under negotiations. Among various MCDM methodologies, Analytic Hierarchy Process (AHP) is utilized in this paper. Although AHP is one of the most popular MCDM methodologies, AHP needs a number of pair-wise comparisons for assessing alternatives and hence may give excessive decision making burden to the decision makers. In this paper, in order to reduce the decision making burden, a preference function based estimation method is proposed. We can expect that the MCDM based logistics brokerage agent can be used as an efficient and effective tool for e-logistics marketplaces on the internet.

• IE interfaces
• /
• v.18 no.4
• /
• pp.390-401
• /
• 2005

In this paper, we propose an efficient internet-based logistics brokerage concept which can overcome the weakness of the traditional off-line method to intermediate between vehicle owners and shippers for matching empty vehicles and freights. For defining a business model based on the new concept and implementing an information system, it is necessary to analyze the business process for the internet-based logistics brokerage using a modeling methodology. In this paper, we analyze the logistics brokerage process using the UN/CEFACT Modeling Methodology (UMM) being utilized as a standard modeling methodology in the area of electronic commerce. After analyzing the business process, we can expect that the UMM can be used as a useful tool for modeling the business process of electronic commerce in which the description of the collaborative work is very important.