Browse > Article
http://dx.doi.org/10.11627/jkise.2012.35.4.179

Case Study for Casting Design of Automobile Part(Gear Box) Using CAE  

Kwon, Hongkyu (Dept. of Industrial and Management Engineering, Namseoul University)
Jang, Moo-Kyung (Dept. of Industrial and Management Engineering, Namseoul University)
Publication Information
Journal of Korean Society of Industrial and Systems Engineering / v.35, no.4, 2012 , pp. 179-185 More about this Journal
Abstract
When manufacturing die casting mold, generally, the casting layout design should be considered based on the relation among injection system, casting condition, gate system, and cooling system. Also, the extent or the location of product defects was differentiated according to the various relations of the above conditions. In this research, in order to optimize casting design of an automobile part (Gear Box) Computer Aided Engineering (CAE) was performed by using the simulation software (Z Cast). The simulation results were analyzed and compared with experimental results. During the mold filling, internal porosities caused by air entrap were predicted and reduced remarkably by the modification of the gate system and the configuration of overflow. With the solidification analysis, internal porosities caused by the solidification shrinkage were predicted and reduced by the modification of the gate system. For making a better production die casting tool, cooling systems on several thick areas are proposed in order to reduce internal porosities caused by the solidification shrinkage.
Keywords
Die Casting; Gate System; FEM(Finite Element Method); CAE; Solidification;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Hong, S.K., Series I : Melting and casting of Aluminum Alloys. Journal of The Korea Foundry Society, 2008, Vol. 28, No. 2, p 45-51.
2 Kim, E.S., Park, J.Y., Kim, Y.H., Son, G.M., and Lee, K.H., Evaluation of Diecasting Mold Cooling Ability by Decompression Cooling System. Journal of The Korea Foundry Society, 2009, Vol. 29, No. 5, p 238-243.
3 Kim, J.K. and Kim K.Y., Improvement of Mold Filling in Aluminum Gravity Die Casting by Vacuum Suction. Journal of The Korea Foundry Society, 2009, Vol. 29, No. 3, p 138-143.
4 Kim, Y.C., Choi, S.W., Cho, J.I., Jeong, C.Y., and Kang, C.S., Optimization of the Thin-walled Aluminum Die Casting Die Design by Solidification Simulation. Journal of The Korea Foundry Society, 2008, Vol. 28, No. 4, p 190-194.
5 Park, J.Y., Kim, E.S., Park, Y.H., and Park, I.M.; Optimization of Casting Design for Automobile Transmission Gear Housing by 3D Filling and Solidification Simulation in Local Squeeze Diecasting Process. Korean Journal of Materials Research, 2006, Vol. 16, No. 11, p 668-675.   DOI
6 Park, Y.K. and Yang, J.M., Scheduling of a Casting Sequence Under Just-In-Time (JIT) Production. Journal of the Society of Korea Industrial and Systems Engineering, 2009, Vol. 32, No. 3, p 40-48.
7 Shin, H.W., Chung, Y.J., and Kang, S.G., A Study on Die Casting Process of the Automobile Oil Pan Using the Heat Resistant Magnesium Alloy. Journal of KSEM, 2009, Vol. 17. No. 3, p 45-53.