• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.271-275
• /
• 1996

In this paper, an automatic spot inspection system has been developed for camera target lens using the computer aided vision system. The developed system comprises: light source, magnifying optics, vision camera, XY robot, and a PC. An efficient algotithm for the spot detection has been implemented, thus up tof ew micrometer size spots can be effectively identified in real time. The developed system has been fully interfaced with XY robot systenm, PLCs, thus the practical spot inspection system has been implemented. The system has been applied to a practical camera manufacturing process, and showed its efficiency.

• 한국CDE학회논문집
• /
• 제3권1호
• /
• pp.22-30
• /
• 1998

The deflection yoke (DY) controls the direction of the electron beam that falls on the screen of the television monitor. Its quality depends on the shape and density of coils wound around the DY coil separator. Winding frames are used to make these coils, and therefore, their shapes are essential in making quality coils. A reverse engineering(RE) is applied to create the 3D model of the winding frame. It considerably shortens the design verification time and shows the level of accuracy that is feasible in the production mode. The paper explains each step of the reverse engineering process in detail.

• 대한기계학회논문집
• /
• 제13권3호
• /
• pp.443-450
• /
• 1989

본 연구에서는 공작기계 생산 현장에서 직접적으로 이용될 수 있는 측정시스 템의 개발을 목표로 이제까지 이론적으로 제안된 스핀들 정밀도 측정방법을 종합 분석 하여 디지틀 측정의 기본이론을 정립하고 이를 기반으로 마이크로 컴퓨터를 이용한 측정시스템을 실계 제작하였다.또한 실험을 통하여 본 연구에서 제안된 측정 시스 템의 성능을 기존의 애널로그 측정방법과 비교 검토함으로써 본 방법의 우수성 및 제한점을 실증적으로 입증하고자 하였다.

• 한국정밀공학회지
• /
• 제21권11호
• /
• pp.61-68
• /
• 2004

Recently, there has been an increasing demand for computer-vision based inspection and/or measurement system as a part of factory automation equipment. Existing manual inspection method can inspect only specific samples and has low measuring accuracy as well as it increases working time. Thus, in order to improve the objectivity and reproducibility, computer-aided analysis method is needed. In this paper, front and side profile inspection and/or data transfer system are developed using computer-vision during the inspection process on three kinds of pipes coming from a forming line. Straight line and circle are extracted from profiles obtained from vision using Laplace operator. To reduce inspection time, Hough Transform is used with clustering method for straight line detection and the center points and diameters of inner and outer circle are found to determine eccentricity and whether good or bad. Also, an inspection system has been built that each pipe's data and images of good/bad test are stored as files and transferred to the server so that the center can manage them.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.190-195
• /
• 1997

Abstract: In this paper,an autoematic gear inspection system has been been developed using the computer aided vision system. Image processing and data analysis algorithms for gear inspection have been investigated and shown to perform quickly with high accuracy. As a result,dimensions of a gear can be measured upto few micrometer size in real time. In addition, the system can be applied to a practical manufacturing process even under nosiy conditions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.485-489
• /
• 1996

In this paper, an automatic gear inspection system has been developed using the computer aided vision system. Image processing and data analysis algorithms for gear inspection have been investigated and were shown to perform quickly with high accuracy. As a result, dimensions of a gear can be measured upto few micrometer size in real time. In addition, the system can be applied to a practical manufacturing process even under noisy conditions.

• 한국정밀공학회지
• /
• 제21권7호
• /
• pp.145-152
• /
• 2004

This paper proposed efficient manufacturing system using the OMM (on-machine measurement) system. The OMM system is software based 3D modeler for inspection on machine and it is interfaced tool machine with RS232C. The software is composed of two inspection modules that one is touch probe operating module and the other is laser displacement sensor operating module. The module for touch probe has need of inspection feature that extracted it from CAD data. Touch probe moves to workpiece by three operating modes as follows: manual, general and automatic mode. The operating module of laser displacement sensor is used inspection for profile and very small hole. An Advantage of this inspection method is to be able to execute on-line inspection during machining or after it. The efficiency of proposed system which can predict and definite the machining errors of each process is verified, so the developed system is applied to inspect the mold-base(cavity, core).

• 정보처리학회지
• /
• 제5권1호
• /
• pp.62-74
• /
• 1998

This paper deals with developing a remote & real-time Computer-Aided Logistics Support (CALS) Systems through Information Super-Highway. A prototype of CALS is designed and implemented considering the environment of Information Super Highway. The concept of CSCW based virtual enterprise is discussed in con-nection with the four different activities. development of remote & virtual equipment controller remote-monitoring & inspection real time tracking of logistics information and web-based bidding and delivery system. A real implemented system is demonstrated under the Infor-mation Super-Highway with the corresponding software and hardware configuration.

• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.7-13
• /
• 1998

In this paper, an automatic ball-stud inspection system has been developed using the computer-aided vision system. Index table has been used to get the rapid measurement and multi-camera has been used to get the high resolution in physical system. Camera calibration was suggested to perform the reliable inspection. Image processing and data analysis algorithms for ball stud inspection system have been investigated and were performed quickly with high accuracy. As a result, inspection system of a ball stud could be used with a high resolution in real time.

• 한국정밀공학회지
• /
• 제17권10호
• /
• pp.26-34
• /
• 2000