• Bulletin of the Society of Naval Architects of Korea
• /
• v.22 no.3
• /
• pp.19-26
• /
• 1985

This paper deals with the representation and fairing of ship hull using a B-spline surface which is known as a 3-D model in computer aided free-form design. The first part of this paper is devoted to the fundamental concepts of B-spline theory and its geometrical characteristics. In its second part are described the facillities for efficient application, fast rendering of B-spline surface, and intersection of B-spline surfaces. The examples are presented with actual application to a real ship in the last part. And also a new concept of evaluating the surface fairness by the Gaussian curvature isolines is briefly discussed and its examples are presented.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.613-616
• /
• 1997

MDO(Multidisciplinary Design Optimization) methodology is an emerging new technology to solve a complicate structural analysis and design problem with a number of design variables and constraints. In this paper MDO methodology is adopted through the use of computer aided engineering(CAE) system. And this paper treats the structural design problem of RIROB(Reactor Inspection Robot) through the application of MDO methodology. In a MDO methodology application to the structural design of RIBOS, kinetodynamic analysis is done using a simple fluiddynamic analysis model for the warter flow over the sensor support surface instead of difficult fluid dynamic analysis. Simultaneously the structural static analysis is done to obtain the optimum structural condition. The minimum thickness (0.8cm) of the RIROB housing is obtained for the safe design of RIROB. The kinetodynamic analysis of RIROB. The kinetodynamic analysis of RIROB is done using ADAMS and the static structural analysis of RIROB is done using NISA.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.1151-1156
• /
• 2002

This paper describes the examples of Noise, Vibration and Harshness(N.V.H) development applying Computer Aided Engineering(CAE). Some Commercial Software was used to reduce the cost, development time and to predict the Noise and vibration phenomenon of new vehicle design. This paper is including measured and analysis data, and tried to prove the good correlation between measured and calculated data, so test and analysis data were compared seriously and carefully. Analysis models, which were used to predict and develop the NVH phenomenon, analysis method, and a field of --0application are explained briefly. Also, model pictures are presenting in this paper. This paper describes the analyzing method of the calculated results, design modification and development procedure, and NVH performance target setting up and procedure.

• Spatial Information Research
• /
• v.10 no.4
• /
• pp.515-532
• /
• 2002

Planning Support System (PSS), an alternative framework of computer-aided planning system combining geographic information system (GIS), urban models, and visualization tools, has been actively researched and applied in many developed countries. This paper introduces a PSS-based land use change model, What if\ulcorner PSS, by applying it to Chongju City, Korea. This model application study used the spatial database, Restricted Development Zone (RDZ), and other hypothetical land supply- and demand-related policies of Chongju City. The collaborative PSS model supported land use planning process by helping users to speedily and easily create and test policy-oriented scenarios. The study found that the fully operational PSS model was readily applicable and useful to Korean local land use planning. The paper discusses the conceptual model framework, data requirement, application process, model output, and practical usage. This study would be considered as a prototypical approach of PSS-based land use plan making for Korean cities.

• Journal of the Korean Society of Systems Engineering
• /
• v.3 no.1
• /
• pp.1-7
• /
• 2007

For the systems engineering process-based development, all requirements of 'Smart UAV Development Program' have been constructed as the database of CORE(R), computer aided systems engineering tool. In this paper, the construction and application of model-based test & evaluation system using those database is described, which prevents omitting essential tests and performing unnecessary rests and enables automatic reflection of database changes and standardization of document formats.

• Journal of the Korean Society of Systems Engineering
• /
• v.17 no.2
• /
• pp.91-97
• /
• 2021

User interface for cancer classification system is a software application with clinician's friendly tools and functions to diagnose cancer from pathology images. Pathology evolved from manual diagnosis to computer-aided diagnosis with the help of Artificial Intelligence tools and algorithms. In this paper, we explained each block of the project life cycle for the implementation of automated breast cancer classification software using AI and machine learning algorithms to classify normal and invasive breast histology images. The system was designed to help the pathologists in an automatic and efficient diagnosis of breast cancer. To design the classification model, Hematoxylin and Eosin (H&E) stained breast histology images were obtained from the ICIAR Breast Cancer challenge. These images are stain normalized to minimize the error that can occur during model training due to pathological stains. The normalized dataset was fed into the ResNet-34 for the classification of normal and invasive breast cancer images. ResNet-34 gave 94% accuracy, 93% F Score, 95% of model Recall, and 91% precision.

• Journal of Korea Foundry Society
• /
• v.9 no.1
• /
• pp.67-72
• /
• 1989

Solidification analysis was conducted on large steel castings and ingots by a modified finite difference method. Auto-mesh generation system was developed for improving the application of the computer analysis system to casting disign. Combined use of the prediction parameters, solidification time and temperature gradient, and an auxiliary parameter, shrinkage potential, were used to predict the formation of shrinkage defects. Several examples on the prediction of shrinkage cavity by this method were campared with the experimental reslts. It was found that a quantitative design of large steel castings and ingots can be made by the computer aided analysis of solidification process.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10b
• /
• pp.22-25
• /
• 2003

The forming limits are studied for cold upsetting of high strength aluminium alloy in the present paper. Different geometry ratio and frictional conditions are investigated in the forgeability test to evaluate the forming limits and also to obtain the various strain paths. The critical fracture value can be obtained by integrating along the strain path till free surface crack initiation. To predict the damage evolution of cold upsetting, the computer-aided evaluation of forming limits is obtained by using the finite-element software DEFORM-3D and the modified Cockcroft-Latham criterion. The predicted theoretical limit strains agree quite well with the experimental results.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.5
• /
• pp.635-640
• /
• 2016

Tunnel field-effect transistor (TFET) is a promising candidate for the next-generation electron device. However, technical issues remain for their practical application: poor current drivability, shor-tchannel effect and ambipolar behavior. We propose herein a novel recessed-channel TFET (RTFET) with the asymmetric source and drain. The specific design parameters are determined by technology computer-aided design (TCAD) simulation for high on-current and low S. The designed RTFET provides ${\sim}446{\times}$ higher on-current than a conventional planar TFET. And, its average value of the S is 63 mV/dec.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.317-321
• /
• 1991

In recent years, the discrete-data and digital control systems have gained importance in all industies due in part to the advances made in microcomputers, as well as the advantages found in working with digital signals. So, the developments of the computer aided design packages to analysis, control law design and digital implementation of control systems are increasingly needed and those substantial technological improvements are now expected. In the paper, a real time control program package(RTCPP) for the implementation of digital control is developed by using C language. The digital controls for the feedfoward and feedback controllers such as PI(propotional and Integration) type, regulator and servo types can be implemented by an IBM PC compatible computer with some interface modules of A-D/D-A converter and RS-232C. The effectiveness of RTCPP is illustrated by the application controls for motor and magnetic levitation systems.