• 소성∙가공
• /
• 제1권1호
• /
• pp.42-51
• /
• 1992

The ring compression test has been widely employed as an experimental means to determine the friction factor. The calibration curves are obtained by the rigid-plastic finite element analysis for various work-hardening exponent and strain-rate hardening exponent. The effects of work-hardening exponent and strain-rate hardening exponent are thoroughly studied and discussed from the finite element computation. The change of friction factor during height reduction in ring compression is also discussed. Then, the method to estimate the change of friction factor during ring compression is proposed.

• 디지털산업정보학회논문지
• /
• 제14권3호
• /
• pp.69-75
• /
• 2018

Recently, various convergence technologies are attracting attention due to the block chain innovation technology in the M2M environment. Although the block-chain-based technology is known to be secure in its own right, there are various problems such as security and weight reduction in various M2M environments connected with this. In this paper, we propose a new lightweight method for the hash tree generation of block chains to solve the lightweight problem. It is designed considering extensibility without affecting the existing block chain. Performance analysis shows that the computation performance increases with decreasing the existing hash length.

• International Journal of Aeronautical and Space Sciences
• /
• 제5권1호
• /
• pp.64-74
• /
• 2004

The Grid is a communication service that collaborates dispersed highperformance computers so that those can be shared and worked together. It enablesthe analysis of large-scale problem with the reduction of computation time bycollaborating high performance computing resources in dispersed organizations. Thus,the present paper focuses on the efficient flow calculation using the Grid. To increaseparallel efficiency, a simple load balance algorithm for the Grid computing is proposedand applied to various aerodynamic problems.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.71-74
• /
• 2005

The present study describes the prediction of the flow induced noise level of a high-speed rotating hexagonal disk and proposes the way how to reduce it. Since a hexagonal disk, which is used in the laser printer and named a Polygon mirror, has six sharp corners, there are low and high pressure regions on each of six edges when it rotates. Therefore, the pressure difference generates three dimension flow field and causes aerodynamic noise. The Ffowcs-Williams and Hawkings (FWH) method is employed for the analysis. We have measured the sound pressure levels and compared them with the computational results. The calculated sound pressure levels agree well with the experimental results. We modified the shape of the edges of a hexagonal disk to reduce the noise level and confirm their effects through numerical computation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.377-382
• /
• 1987

To obtain a high resolution microwave images, back scattering microwave fields from one, two, four poles on a rotating object is measured. A computation algorithm to reconstruct these poles images from measured data is programed. The program is tested for these poles on a rotating object for different frequency intervals in the X-Band. The more frequency data yield the reduction of side lobe level. The reconstructed image for the two pole objects having the diameter of 1cm and separated by 1 lamda, 2 lamda (lamda-3.75 cm) from the measured data is shown. And, the image of two objects having the different reflectivity coefficient from the measured data is also shown and it assumes that this reconstructing algorithm from the measured angular spectrum provides quite accurate images.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권4호
• /
• pp.246-251
• /
• 2003

This paper proposes a new methodology for the estimation of impedance characteristics, which is one of the important issue in the power distribution network design of printed circuit boards. The modeling process of the proposed method divides the power distribution network into uniform segment, and each segment is modeled by distributed RLC transmission lines. Then, for the efficient computation of impedance characteristics in frequency domain. the proposed method uses a model-order reduction method.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.229-234
• /
• 2005

This study aims to build basic data for a optimization of a ventilation system for indoor environment improvement in school building. To this end, we conducted field tests and computation fluid dynamics simulations about a indoor environment in dependence on operation of a ceiling type inverter air conditioner and ventilation system. The results could be summarized as follows. (1) For the ventilation system of 350CMH, 500CMH and 850CMH, reduction of each $CO_2$ concentration was measured 662ppm, 748ppm and 526ppm. (2) A optimal discharge angle of the ceiling type inverter air conditioner system was evaluated 45 degree in heating and cooling.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1991년도 학술발표회 논문집
• /
• pp.163-168
• /
• 1991

In this paper, we propose a new systolic architecture for the order statistics(OS) constant false alarm rate(CFAR) processor. In the proposed architecture, each processing element(PE) can compare two reference data cells with one test cell simultaneously in each clock cycle. So the utilization of each PE in this architecture is 100% whereas the utilization of each PE in the systolic architecture previously reported by Ritcey and Hwang is 50% because of one clock delay between two adjacent PE's active in computation. This can speed up the data processing rate by a factor of two. With this architecture, we can obtain the reduced number of communication links between adjacent PE's and reduction of the latency by half in comparison with the one proposed by Ritcey and Hwang.

• 한국경영과학회지
• /
• 제29권2호
• /
• pp.59-75
• /
• 2004

Recommendation is a personalized information filtering technology to help customers find which products they would like to purchase. Collaborative filtering works by matching customer preferences to other customers in making recommendations. But collaborative filtering based recommendations have two major limitations, sparsity and scalability. To overcome these problems we suggest using adjusted product hierarchy, grain. This methodology focuses on dimensionality reduction and uses a marketer's specific knowledge or experience to improve recommendation quality. The qualify of recommendations using each grain is compared with others by several experimentations. Experiments present that the usage of a grain holds the promise of allowing CF-based recommendations to scale to large data sets and at the same time produces better recommendations. In addition. our methodology is proved to save the computation time by 3∼4 times compared with collaborative filtering.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1964-1967
• /
• 2002

Recently design verification have been played an important role in the design of large scale and complex systems. In this article, we especially focus on model checking methods. Behaviors of modeled systems are generally specified by temporal formulas of computation tree logic. However. Users must know well temporal specification because the specification might be complex. We proposed method that temporal formulas are gained inductively and amounts of memory and time are reduced. Finally, we will show verification results using our proposed method.