• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.834-837
• /
• 2004

In this study, the electric accelerated reinforcing bar corrosion test was carried out to estimate the coefficient of electrolytic corrosion based on the concept of Faraday's law according to rebar corrosion rate and concrete compressive strength which had an effect on the actual corrosion mass loss. The results of this paper allow the prediction of corrosion amount in the electric accelerated reinforcing bar corrosion test method.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.757-762
• /
• 2003

This paper concerns the new equations for the compressive strength of existing concrete structures by ultrasonic pulse velocity test. The proposed equation are as follows; fc =5255.9 - 3365.8Vp + $548.4Vp^2$ (here, $r^2$=89.7%)

• International Journal of Concrete Structures and Materials
• /
• 제5권2호
• /
• pp.87-96
• /
• 2011

Many studies have been performed on steel fiber-reinforced normal/high-strength concrete (SFRC, SFRHC) for years, which is to improve some of the weak material properties of concrete. Most of equations for material strengths of SFRHC, however, were proposed based on relatively limited test results. In this research, therefore, the material test results of SFR(H)C were extensively collected from literature, and material tests have conducted on SFR(H)C; compressive strength tests, splitting tensile tests, and modulus of rupture tests. Based on the extensive test data obtained from previous studies and this research, a database of SFR(H)C material strengths has been established, and improved equations for material strengths of SFR(H)C were also proposed. Test results showed that both the splitting tensile strength and the modulus of rupture of SFR(H)C increased as the volume fraction of steel fiber increased, while the effect of the steel fiber volume fraction on the compressive strength of SFR(H)C were not clearly observed. The proposed equations for the splitting tensile strength and the modulus of rupture of SFR(H)C showed better results than the previous equations examined in this study in terms of not only accuracy but also safety/reliability.

• 한국안전학회지
• /
• 제29권4호
• /
• pp.103-109
• /
• 2014

In this study, two types of water-soluble sulfur, LSA and LSB, were developed and the influence of the water-soluble sulfur on the mechanical properties and durability of concrete were experimentally evaluated. In order to evaluate mechanical properties and carbonation resistance of concrete with water-soluble sulfur, compressive strength test, flexural strength test, bonding strength test, and carbonation resistance test were performed. Compressive strength of only concrete with 1% LSA was increased while that of concrete with LSB was proportionally increased with the higher LSB dosage. On the other hand, flexural strength of concrete with LSA and LSB was increased by 12-41% and 36-74%, respectively. Carbonation resistance of concrete with water-soluble sulfur were increased by 25-66%. As a result, it should be noted that the water-soluble sulfur can not only solve the demerit of sulfur concrete but also offer the durability of sulfur concrete.

• 한국농공학회논문집
• /
• 제46권3호
• /
• pp.65-72
• /
• 2004

Modern underground and tunnel works that the wet type shotcrete is getting widely designed and applied in a large scale project. Further to its applications, the needs of improving the performance of the shotcrete, such as new and developed additives and accelerators fur increasing the performance of shotcrete, become the most important issue in the field. The main objective of this study evaluated to performance of steel fiber reinforced shotcrete using alkali free based accelerator for the durability and high quality of shotcrete. The major test variables are accelerator type and its dosage. One type silicate based accelerator and one type aluminate based accelerator and one type alkali free based accelerator were used. The dosage of accelerators is determined by the manufactures and laboratory test condition. Compressive strength test results showed that the dosage of silicate and aluminate based accelerators caused reduction of mechanical properties of shotcrete. Compressive strength of alkali free based accelerator is more stable than of silicate and aluminate based accelerators. Also, according to the compressive strength and flexural test results, it was found that steel fiber reinforced shotcrete used alkali free based accelerator could attain significant improvement in the mechanical and flexural performance.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권4호
• /
• pp.12-15
• /
• 2009

The $I_c$ degradation behavior of critical current in differently processed YBCO and SmBCO CC tapes with IBAD template has been investigated. It has been known that the residual strain in the CC tape will influence the shape of the $I_c$-strain window; $I_c$ may show a peak value if there exist a residual strain induced in the tape during manufacturing. The difference of residual strain may be resulted from the adopted different deposition techniques. In this study, bending test of CC tapes has been done using the Goldacker bending test rig which can produce both compressive and tensile bending strain continuously or alternately to the sample. For SmBCO CC tapes, in continuous compressive bending test, $I_c$ showed a minimal increase and did not degrade up to the largest strain that can be applied using the bending rig equivalent to 1.15% based on the sample thickness. However, in the case of alternate application of compressive and tensile bending strain, $I_c$ showed a larger degradation and a lower reversible limit when compared with the case of continuous application of the bending strain. When $I_c$ started to degrade significantly at the tension side, the reversibility ended, also at the compression side which is resulted from the permanent deformation like delamination or cracks that was induced due to tensile bending strain.

• 콘크리트학회논문집
• /
• 제20권2호
• /
• pp.147-156
• /
• 2008

콘크리트의 일축압축실험에서 축하중이 발생함에 따라 새로운 균열이 발생하고 이 균열의 확장이 파괴의 주된 원인이 되는 경우가 대부분인데 이는 입자 결합 모델에서 입자간의 결합이 파괴되어 해석 대상체의 균열 모사와 유사하게 해석될 수 있어 콘크리트의 표준 공시체에 대하여 일축압축실험의 모사 가능성을 연구하였다. 그러나 입자 결합 모델은 해석 대상체를 입자간의 집합체로 모사하기 때문에 입자간의 결합을 결정하는 미시변수에 의해서 해석 대상의 거시물성이 변하게 되어 이들 변수간의 정량적인 관계를 파악하는 것이 중요하다. 본 연구에서 사용된 접촉 결합 모델에서는 총 8개의 미시변수가 있어 이들 변수와 일축압축실험결과 나오는 거시물성-탄성계수, 일축압축강도, 포아송비-와 콘크리트의 압축파괴거동에 관련이 있는 균열 개시 응력과 일축압축강도와의 비로서 5개의 거시물성에 대하여 부분배치법 및 회귀분석을 통하여 이들 간의 정량적인 관계를 도출하였고 그 결과 일축압축강도를 가정한 가상시료 및 조사 자료로부터 얻은 일축압축강도를 비교적 잘 모사할 수 있었다. 또한 해석을 수행한 공시체의 응력-변형률 곡선이나 응력 수준별 균열 발생의 빈도 및 파괴거동을 관찰한 결과 일반적인 콘크리트의 일축압축하중 하에서의 파괴거동과 상당부분 유사함을 보여 입자 결합 모델을 이용하여 콘크리트 공시체에 대한 일축압축실험을 잘 모사할 수 있다고 본다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.441-446
• /
• 1994

In this study proposed to rapid and simple test method for early decision of quality of concrete. As the this paper is experimental study for compressive strength of mortar using resistance method, the obtained results are summarized as follow ; $\circled1$ The resistance ratio was decreased as the incement of water-cement ratio $\circled2$ The compressive strength presented to the tendency of increment as resistance ratio is increaing

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.672-675
• /
• 2004

The objective of this study was to understand the effect of hwangtoh and slag on various properties of concrete. Main variables were replacement level of admixtures, hwangtoh and slag, and curing temperature. Test results indicated that the compressive strength of concrete replaced by either hwangtoh and slag was significantly influenced by curing temperature. The elasticity modulus and compressive peak strain of concrete showed a small increase with increasing hwangtoh replacement.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.457-460
• /
• 2003

This paper discusses laboratory evaluations to assess the physical properties of antiwashout underwater concrete (AWC) containing pozzolanic materials such as fly ash (FA), blast furnace slag (SG) and metakaolin(MK). For the experiments, pH value, suspended solids, slump flow, efflux time and compressive strength were tested. According to the results from compressive strength test, MK10 showed the very high compressive strength characteristic during the entire curing days, but the rate of strength development was decreased as time goes by.