• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.45-48
• /
• 2007

The aim of this study is to estimate the compressive force of steel member using a system identification technique with vibration measurements. To date, several methods have been presented to estimate the compressive force using static and/or dynamic responses of the steel member. However, each and every one of these methods has its disadvantages as well as advantages in its procedures, level of accuracy, and equipment requirements. The paper reports a qualitative investigation of vibration under monoharmonic excitation. The methodology utilizes the relationship between the natural frequencies, the structural parameters, and the compressive force of the member. In this paper, experimental results are presented with a steel beam subjecting to several compressive forces and the proposed method is validated using both numerical and experimental data.

• 한국지반환경공학회 논문집
• /
• 제20권4호
• /
• pp.5-9
• /
• 2019

본 논문은 건설재료(암석, 콘크리트, 목재 등) 등의 압축강도를 비파괴적으로 산정하기 위하여 재료타격 시 발생하는 충격력에 대한 응답신호를 모두 측정하고 이를 누적한 전체 충격력 신호에너지의 이용성 및 가능성에 관해 기초연구를 수행하고 그 결과를 제시하는 것이다. 본 연구에서는 이를 위해서 충격 및 측정장치를 고안하였고 이를 이용하여 측정대상물을 회전 자유낙하에 의해 초기 타격토록하고 이후 반발작용에 의한 반복타격이 소멸될 때까지 발생할 수 있도록 하였다. 본 연구에서는 서로 다른 강도를 가지는 목재와 암석시편에 대하여 충격력실험을 실시하고 발생신호를 측정하였다. 시편별 산정된 전체 충격력 신호에너지는 직접압축강도시험을 통한 시편별 압축강도와 상호 비교하였다. 비교결과, 충격력 응답신호를 통해 산정된 전체 충격력 신호에너지는 시편의 직접압축강도와 직접적인 관계가 있다는 것을 확인하였으며, 이를 통해 다양한 건설재료의 압축강도는 재료타격 시 발생하는 충격력 응답신호로부터 산정된 전체 충격력 신호에너지를 이용하여 비파괴적으로 산정할 수 있음을 알 수 있었다.

• 한국지반환경공학회 논문집
• /
• 제23권10호
• /
• pp.13-19
• /
• 2022

본 연구는 암석의 압축강도를 비파괴적으로 산정하기 위하여 암석시편 초기타격 및 반발에 의한 연속적인 반복타격 시 발생하는 타격력에 대한 응답신호를 모두 측정하고 이를 누적한 전체 타격력 신호에너지를 이용하고 그 결과를 제시하는 것에 관한 것이다. 본 연구에서는 이를 위해서 타격 및 측정장치를 고안 및 셋업하였고 이를 이용하여 암석시편을 회전 자유낙하에 의해 초기 타격토록하고 반발작용에 의한 반복타격이 이루어질 수 있도록 하였다. 본 연구에서는 서로 다른 세 종류의 암석시편에 대하여 타격력실험을 실시하고 발생신호를 측정하였다. 각 시편별 초기 및 반발타격으로부터 발생된 신호로부터 산정된 전체 타격력 신호에너지와 각 시편별 측정한 직접압축강도와 상호 비교하였다. 비교결과, 타격력 응답신호로 부터 산정된 전체 타격력 신호에너지는 시편의 직접압축강도와 직접적인 관계가 있다는 것을 확인하였으며, 이를 통해 암석의 압축강도는 타격 시 발생하는 타격력 응답신호로부터 산정된 전체 타격력 신호에너지를 이용하여 비파괴적으로 산정할 수 있음을 알 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1690-1692
• /
• 2000

The principle of crimping connection is to produce a compressive connection force between terminal and cores(wire conductor). Compressive connection force is produced by pushing each other on that stress(crimping force) of barrel by restored elastic strain after plastic deformation and the expansion force of cores' elastic stress. And resistance and tension force between terminal and cores are determined according to the condition of compressive connection force. In this study, we've found out that the adaptive height which has maximum tensile force by measuring a tensile force with a height of terminal.

• 한국운동역학회지
• /
• 제21권3호
• /
• pp.335-343
• /
• 2011

Patellofemoral pain syndrome is the most common problem involving the knee, accounting for 25% of knee injuries. Repetitive, overuse activities cause increased force at the patellofemoral joint, resulting in pain during flexion and extension activities. Most research have been conducted in exploring the patellofemoral compressive force in gait, squat and lunges, even though in real cases, possibilities in landing exist. The purpose of this study was to compare the differences in patellofemoral compressive force according to two different height. Sixteen collegiate male students(age: 22.25 ${\pm}$ 3.30 yrs, height: 177.25 ${\pm}$ 4.44 cm, weight: 77.50 ${\pm}$ 8.18 kg) were chosen. The subjects performed drop landings in 45 cm, 60 cm. The findings demonstrated that higher height showed peak knee extension moment, quadriceps contraction force, patellofemoral compressive force with increased VGRF. Regarding the patellofemoral joint compressive force, it increased by quadriceps contraction force with knee flexion during landing, yet, it showed no difference in maximal knee flexion. To minimize patellofemoral joint stress and reduce the likelihood of developing PFPS, we recommend that predesigned quadriceps and hip muscle group strengthening are needed during conditioning and training.

• 한국정밀공학회지
• /
• 제23권5호
• /
• pp.149-154
• /
• 2006

The cold expansion method (CEM) is one of the widely used a method to improve the fatigue behavior of materials in aerospace industry. Such improvement is due to the compressive residual stress developed when a tapered mandrel goes through the fastener holes a little smaller than the mandrel. CEM is retarded of crack initiation due to the compressive residual stress developed on the hole surface. Many researchers are studied a finite element analysis of residual stress around fastener hole. But in case of real model, fastener hole has a clamping force after CE. Therefore, it is respected that residual stress distributions should be changed due to clamping forces. In this paper, it was performed finite element analysis of residual stress by clamping force after CE in the plate having adjacent holes. From this study, it has been found that compressive residual stress near the hole increases according to clamping force. Also, the more increase clamping force, the more increases compressive residual stress. However, tensile residual stress increase beyond clamping force area.

• Structural Engineering and Mechanics
• /
• 제3권5호
• /
• pp.475-495
• /
• 1995

In the past, physical models have been proposed, in compliance with the concept of the compressive-force path, for the realistic design of various statically determinate structural concrete members. The present work extends these models so as to encompass indeterminate RC structural forms. Pilot tests conducted on continuous beams and fixed-ended portal frames have revealed that designing such members to present-day concepts may lead to brittle types of failure. On the other hand, similar members designed on the basis of the proposed physical models attained very ductile failures. It appears that, unlike current design approaches, the compressive-force path concept is capable of identifying those areas where failure is most likely to be triggered, and ensures better load redistribution, thus improving ductility. The beneficial effect of proper detailing at the point of contraflexure in an indeterminate RC member is to be noted.

• 대한치과교정학회지
• /
• 제28권3호
• /
• pp.391-398
• /
• 1998

본 연구는 유한요소법을 사용하여 상악견치에 intrusion arch wire를 강제로 engage시켰을 때 상악 견치와 치근막에서 발생되는 압축력과 인장력의 분포의 양을 알아보고 어느 부분에 집중되는가를 분석하였다. 또한 각 부분에서의 압축력과 인장력의 비율을 비교하기 위해서 시행하여 다음과 같은 결과를 얻었다. 1. 상악 견치의 FA point와 백악법랑경계부분에서는 압축력과 인장력의 비율이 거의 비슷하게 나타났다. 2. 치근첨 부분에서는 압축력이 인장력의 거의 4배정도 크게 나타났다. Intrusion force적용시 치근흡수 정도가 치근첨에서 발생되는 것을 정량화시켜서 보여준 결과이다. 3. 백악법랑경계부분은 즉 FA point를 제외하고는 압축력과 인장력이 가장 큰 값을 보이고 있다. 즉 치아에 교정력이 직접 적용된 부분을 제외하고는 치아와 치주인대가 처음 접촉되는 백악법랑경계부에서 응력이 집중되는 것을 유추할 수 있다.

• Safety and Health at Work
• /
• 제2권3호
• /
• pp.236-242
• /
• 2011

Objectives: To determine the feasibility of predicting static and dynamic peak back-compressive forces based on (1) static back compressive force values at the lift origin and destination and (2) lifting speed. Methods: Ten male subjects performed symmetric mid-sagittal floor-to-shoulder, floor-to-waist, and waist-to-shoulder lifts at three different speeds (slow, medium, and fast), and with two different loads (light and heavy). Two-dimensional kinematics and kinetics were captured. Linear regression analyses were used to develop prediction equations, the amount of predictability, and significance for static and dynamic peak back-compressive forces based on a static origin and destination average (SODA) backcompressive force. Results: Static and dynamic peak back-compressive forces were highly predicted by the SODA, with R2 values ranging from 0.830 to 0.947. Slopes were significantly different between slow and fast lifting speeds (p < 0.05) for the dynamic peak prediction equations. The slope of the regression line for static prediction was significantly greater than one with a significant positive intercept value. Conclusion: SODA under-predict both static and dynamic peak back-compressive force values. Peak values are highly predictable and could be readily determined using back-compressive force assessments at the origin and destination of a lifting task. This could be valuable for enhancing job design and analysis in the workplace and for large-scale studies where a full analysis of each lifting task is not feasible.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2007년도 추계학술발표논문집
• /
• pp.325-330
• /
• 2007

Uniaxial tensile test are generally much simpler than uniaxial compressive test. Uniaxial compressive test is experimentally more difficult because of the low buckling resistance of a sheet of paper. In order to avoid buckling, many researchers have applied various lateral restraint techniques to investigate paper uniaxial compression behavior. Adding unnecessary force to inhibit compressive deformation of the sheet is unwanted, but sufficient force must be used to inhibit buckling. This study has been carried out to develop new uniaxial compressive standard test method without exerting unnecessary force to paper specimen to prevent buckling.