• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.154-157
• /
• 2002

A cyto-indentation technique was used to obtain the biomechanical compressive compliance property of an chondrocyte cell attached to glass surface, which was tried to generate joint cartilage by tissue engineering. Piezo-transducer system and dual photo-diode system were used to conduct mechanical indentation through displacement-controlled testing and the measurement of corresponding cell reaction force. The Poisson's ratio of 0.37 was quoted from other report. The compressive compliance of chondrocyte, that was determined by elastic contact theory, was 1.38${\pm}$0.057 kPa. This value is 30% higher than that of MG63 osteoblast-like cell. The cyto-indentation technique employed in this study is so precise that it can quantify the biomechanical property of single cell.

• 대한기계학회논문집
• /
• 제16권6호
• /
• pp.1115-1120
• /
• 1992

본 연구에서는 ASTM의 단일시편법으로 시험해석할 때에 나타나는 가장 큰 문 제점인 균열길이 감소현상의 원인해석과, 균열길이 감소현상을 고려한 균열길이 측정 수정식을 제안하고자 하며, 다음 절차로 연구를 수행하였다. (1) 균열선단의 응력장해석과, 이 응력장해석에 의한 균열길이 감소현상을 해석하였 다. (2) CT와 TPB 시편에서의 균열길이 측정식의 수정식을 제안하였다. (3) 이 수정식의 타당성을 $J_{IC}$ 시험해석을 통하여 검토하였다.다.

• 대한기계학회논문집A
• /
• 제24권12호
• /
• pp.3010-3017
• /
• 2000

For integrity evaluation of cracked or damaged structures, fracture toughness test results in ASTM are widely used. The fracture toughness values of the structures are used as an effective design criterion in nuclear plants and aircraft structures. Sometimes the difference of P-$\delta$ curve trend during the unloading /reloading cycle in the fracture toughness test using partial unloading compliance was observed. The phenomenon as a possible source of error in determining fracture toughness may be caused by the residual stress during unloading work-hardening and bucking of a specimen. Therefore, we evaluate the effect of bucking and compressive residual stress during the K-R and J-R testing using a finite element method.

• 한국식품과학회지
• /
• 제24권2호
• /
• pp.165-170
• /
• 1992

호화된 쌀 전분 젤의 creep 거동을 농도($30{\sim}45%$)와 온도($20{\sim}85^{\circ}C$)를 달리하여 측정하였으며 전분 젤의 점탄성에 미치는 온도와 농도의 영향은 shift factor($a_{T},\;a_{C}$)를 이용하여 분석하였다. Compression creep test의 결과 쌀 전분 젤은 순간변형 부분, 지연탄성 부분 및 유동부분으로 구성된 6-element의 역학적 모델로 해석할 수 있었으며 점탄성 거동은 순간변형 부분이 주체를 이루었다. 전분 농도가 $30{\sim}45%$로 증가함에 따라 creep compliance는 감소하였고 농도 증가는 주로 순간변형 부분에 영향을 미쳤다. 각 농도에서의 total compliance는 shift factor($a_{C}$)를 이용하여 일정한 기준농도(38%)로 변환시켜 농도불변 곡선으로 정확히 나타낼 수 있었다. 온도를 $20{\sim}85^{\circ}C$로 조절하여 얻은 creep compliance는 온도의 증가에 따라 증가하여 젤의 조직이 점점 연화되었다. $20^{\circ}C$를 기준온도로 shift factor($a_{T}$)에 의해 각 온토에서의 단편적 total compliance 곡선을 log(t)에 대해 수평이동시키면 전반적으로 부드럽게 연결되는 master curve를 얻을 수 있었으므로 시간-온도 환산법칙이 잘 성립되었다. 수정된 WLF식을 이용하여 $a_{T}$의 온도 의존성을 분석한 결과 전분 젤의 활성화에너지는 일정하지 않고 온도의 증가에 따라 감소하였으며, 공유결합에 의해 망상구조를 이루는 다른 젤들에 비해 그 값이 상대적으로 작았다.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2000년도 학술대회
• /
• pp.8-9
• /
• 2000

• Structural Engineering and Mechanics
• /
• 제3권5호
• /
• pp.475-495
• /
• 1995

In the past, physical models have been proposed, in compliance with the concept of the compressive-force path, for the realistic design of various statically determinate structural concrete members. The present work extends these models so as to encompass indeterminate RC structural forms. Pilot tests conducted on continuous beams and fixed-ended portal frames have revealed that designing such members to present-day concepts may lead to brittle types of failure. On the other hand, similar members designed on the basis of the proposed physical models attained very ductile failures. It appears that, unlike current design approaches, the compressive-force path concept is capable of identifying those areas where failure is most likely to be triggered, and ensures better load redistribution, thus improving ductility. The beneficial effect of proper detailing at the point of contraflexure in an indeterminate RC member is to be noted.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.335-340
• /
• 2002

By the recently, Environmental pollution is serious by the highly economic growth and expansion of lively country basic industry. Especially, in case of industrial waste and life waste leaped into a pollution source. Also, research for processing of waste and recycling countermeasure is a pressing question on national dimension because it is prohibited an ocean disposal and reclamation. In this study, it looked for fracture characteristic value of recycling a coal ash to decrease environmental pollution by picky and exhaustion of natural resources and to reduce self-weight to prepare for a tall building and earthquake. So a coal ash examined to be possible to do as construction material. It achieved compressive strength test and three points bending test with initial notch depth rate and age for variables to show a basic research data. From the basis of the three points bending test, the fracture parameters - notch sensitivity, fracture energy, initial compliance were experimentally proposed. From the results of the compressive strength test, the elastic modulus was experimentally proposed. Also on the basis of the three points bending test, the fracture parameters - notch sensitivity, fracture energy, initial compliance were experimentally proposed. The results that the strength and fracture energy value are lower than concrete or mortar is described in this paper. Also, it shows that the deflection at fracture decreases as the age increases and the notch sensitivity decrease. However, it is judged to be available to construction material if research is continuously gone forward.

• 한국세라믹학회지
• /
• 제50권1호
• /
• pp.82-86
• /
• 2013

A poled lead zirconate titanate (PZT) cube specimen is subjected to impulse-type compressive stress with increasing magnitude in parallel to the poling direction at four room and high temperatures. During the ferroelastic domain switching induced by the compressive stress, electric displacement in the poling direction and longitudinal and transverse strains are measured. Using the measured responses, linear material properties, namely, the piezoelectric and elastic compliance coefficients, are evaluated by a graphical method, and the effects of stress and temperature are analyzed. Finally, the dependency of the evaluated linear material properties on relative remnant polarization is analyzed and discussed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권4호
• /
• pp.87-96
• /
• 2004

소일시멘트는 자연 상태의 흙을 주원료로 시멘트, 혼합수를 배합하여 일반포장용 콘크리트에 준하는 강도를 발휘하는 특수콘크리트로서 최근 도로포장뿐만 아니라 연악지반 개량 동 여러 분야에 활용되고 있다. 본 연구에서는 화강토 및 붕적토에 고화제를 첨가하여 일축압축강도의 특성 및 시간의존 거동을 규명하고자 하였다 연구 결과 일축압축강도는 시멘트 함량의 증가와 양생기간의 증가에 따라 뚜렷한 강도 증가를 타나내었으며 미 세립분이 많을 수 록 강도가 감소하였으며 X-선 회절 분석 결과 소일시멘트에서 반응생성물인 Vermiculite가 발견되었다 동적반복재하크리프 시험 결과 히스테리시스 곡선으로부터 재료의 동적특성인 복합전단컴플라이언스, 복합전단계수, 위상각을 구하였으며 재료의 동적특성으로부터 크리프 거동의 예측이 가능 하였다

• Journal of Welding and Joining
• /
• 제30권6호
• /
• pp.74-79
• /
• 2012

It depends on the joint configuration, dimensions and constraints of the joint whether the residual stress at the root of single-sided butt weld is tensile or not. Therefore, recommendation is generally made that high R ratio should be used in the fatigue test of welded joint in order to prevent excessively long life caused by compressive residual stress. In this research, the residual stress profile in butt weld joint was obtained through compliance method, using successive extension of a slot and measurement of the variation of strain during the slot extension. The residual stress profile was firstly assumed to be the linear summation of Legendre polynomials up to 9th order excluding 0th and 1st order. Strain variation on the surface was measured while the slot was being extended by cutting to find out the 8 unknown coefficients of each polynomial term. The cut was made by the electric discharge machine. It was concluded that the residual stress near the surface is positive valued, however, it turned into the negative value as soon as it passed through 2 or 3 mm of the depth.