• 제목/요약/키워드: Compression Factor

검색결과 479건 처리시간 0.027초

인간 시각 장치의 특성을 이용한 의학 영상 압축에 관한 연구 (The Study on the Medical Image Compression using the Characteristics of Human Visual System)

  • 지영준;박광석
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1993년도 춘계학술대회
    • /
    • pp.38-41
    • /
    • 1993
  • For efficient transmission and storage of digital images, the requirements of image compression is incresing. Because the medical images contain diagnostic information small distortion has been more important factor than the low rate in such images. Generally the distortion in image is the difference of pixel values. However the image is percieved by human visual systems. So it is reasonable that human visual system characteristics be used as criteria of the image compression. In this paper, the Just Noticeable Difference curve is used as criteria of determining the homogeniety of a block and acceptibility of distortions. And Block Truncation Coding using spatial masking effect of eyes is adopted to code the blocks which contain line components. And small blocks which varies slowly can be approximated to polynomial functions successfully. We proposed the hybrid block coding scheme based on the block characteristics and human visual system characteristics. Simulation to several kinds of the medical images using this method showed that medical images can be compressed 5:1 - 10:1 without noticeable distortion.

  • PDF

A Fast Algorithm for Fractal Image Coding

  • Kim, Jeong-Il;Kwak, Seung-Uk;Jeong, Keun-Won;Song, In-Keun;Yoo, Choong-Yeol;Lee, Kwang-Bae;Kim, Hyen-Ug
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1998년도 춘계학술대회 논문집
    • /
    • pp.521-525
    • /
    • 1998
  • In this paper, we propose a fast algorithm for fractal image coding to shorten long time to take on fractal image encoding. For its performance evaluation, the algorithm compares with other traditional fractal coding methods. In the traditional fractal image coding methods, an original image is contracted by a factor in order to make an image to be matched. Then, the whole area of the contracted image is searched in order to find contractive transformation point of the original image corresponding to the contacted image. It needs a lot of searching time on encoding and remains limitation in the improvement of compression ratio. However, the proposed algorithm not only considerably reduces encoding tin e by using scaling method and limited search area method but also improves compression ratio by using bit-plane. When comparing the proposed algorithm with Jacquin's method, the proposed algorithm provides much shorter encoding time and better compression ratio with a little degradation of the decoded image quality than Jacquin's method.

  • PDF

Feasibility of Serum Pentosidine Level as a Potential Risk Factor for Osteoporotic Vertebral Compression Fracture

  • Choi, Dong-Hyuk;Lee, Sang-Min;Lim, Sung-An;Choi, Yong-Soo
    • Asian Spine Journal
    • /
    • 제12권6호
    • /
    • pp.992-997
    • /
    • 2018
  • Study Design: Feasibility study. Purpose: To evaluate the feasibility of using serum pentosidine level as a potential marker for osteoporotic vertebral compression fracture (OVCF). Overview of Literature: A review of previous studies suggests a negative correlation between serum pentosidine concentration and bone strength. However, it is unclear whether serum pentosidine level might be a potential marker of OVCF in Koreans. Methods: Forty patients who underwent bone mineral density examination were included in this study, and their serum pentosidine levels were prospectively analyzed. Serum pentosidine level was evaluated using enzyme-linked immunosorbent assay. Among all the patients, 11 with OVCF were assigned to the vertebral fracture group and 29 who did not have vertebral fracture were included in the non-fracture group. In addition, we used the Fracture Risk Assessment (FRAX) tool Korean version for assessing the 10-year probability of fracture. Results: There was a statistically significant difference in the mean serum pentosidine level (p=0.04) of the vertebral fracture group (110.8 ng/mL) and the non-fracture group (64.3 ng/mL). Logistic regression analyses showed that serum pentosidine was significantly associated with OVCF. The vertebral fracture group had significantly higher 10-year probability of major osteoporotic fracture as per FRAX than the non-fracture group. There was a positive correlation between pentosidine level and FRAX results (r=0.35, p=0.02). Conclusions: These results suggest that increased serum pentosidine level could be a potential marker for OVCF.

웨이브렛 변환을 이용한 점진적 영상 부호화 (The Progressive Image Coding using Wavelet Transform)

  • 황도연;박정호;유강수;곽훈성
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 하계종합학술대회 논문집(3)
    • /
    • pp.73-76
    • /
    • 2001
  • We propose a new method for image coding that it is based on highly related property between a spatial image and wavelet transform image. The characteristics have an important role in the design of proposed algorithm. This algorithm for image coding is to obtain high compression rate at low bit rate. The other side, the high activity regions are related to significant coefficients which give much influence to image reconstruction, because they mean the important factor to represent the appearance of images such as edge or boundary. For some images with low activity, we can obtain the reconstructed image with near to 30 dB at 150: 1 compression ratio.

  • PDF

피라미드 코어를 가진 샌드위치 판재의 두께 방향 압축 특성에 대한 연구 (A Study on the Compressive Characteristics of Sandwich Sheet with Pyramid Core in the Thickness Direction)

  • 조기철;김지용;김종호;정완진
    • 소성∙가공
    • /
    • 제15권9호
    • /
    • pp.635-640
    • /
    • 2006
  • Sandwich sheet with inner structure is expected to find many applications because of high stiffness to mass ratio. However, low resistance to the compressive pressure in the thickness direction is a dominating factor in the formability of sandwich sheet. In this study, sandwich sheet with pyramid type core is considered. For the compressive characteristics in the thickness direction, experiments and finite element simulations are carried out. In the experiment, deformation behavior is observed and discussed as the compression proceeds. It is shown that a corresponding finite element simulation can give a reasonable agreement with experiment in terms of maximum pressure. However, simulation shows some discrepancy from the experiment in terms of compressive pressure-displacement characteristics. The reasons for this discrepancy are studied in the geometrical imperfectness of sandwich sheet. It is also observed that most of deformation is dominated by buckling mode of pyramid legs.

압축파 속도를 이용한 콘크리트의 강도 평가 (Evaluation of Concrete Strength Using Compression Wave Velocity)

  • 이회근;이광명;김동수;김지상
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
    • /
    • pp.697-702
    • /
    • 1999
  • Among several non-destructive testing methods, ultrasonic pulse velocity method has been widely used for the evaluation of concrete strength. However, this method might not provide accurate estimated results since factors influencing the relationship between strength and wave velocity is not considered. In this study, the evaluation methods of concrete strength using compression wave velocities measured by either ultrasonic pulse velocity method or impact-resonance method are proposed. A basic equation is obtained by the linear regression with velocity vs. strength data at a specific age and then, ageing factor is employed in the equation to consider the difference of the increasing rate between wave velocity and strength. Strengths predicted by the proposed equation agree well with test results.

  • PDF

An experiment on compressive profile of the unstiffened steel plate-concrete structures under compression loading

  • Choi, Byong Jeong;Han, Hong Soo
    • Steel and Composite Structures
    • /
    • 제9권6호
    • /
    • pp.519-534
    • /
    • 2009
  • This study intends to examine the characteristics of compressive behavior and conducts comparative analysis between normal compressive strength under existing equations (LRFD, ACI 318, EC 4) and experimental the maximum compressive strength from the compression experiment for the unstiffened steel plate-concrete structures. The six specimens were made to evaluate the constraining factor (${\xi}$) and width ratio (${\beta}$) effects subjected to the compressive monotonic loading. Based on this experiments, the following conclusions could be made: first, compressive behaviors of the specimens from the finite element analysis closely agreed with the ones from the actual experiments; second, the higher the width ratio (${\beta}$) was, the lower the ductility index (DI) was; and third, the test results showed the maximum compressive strength with a margin by 7% compared to the existing codes.

A Novel Drug Delivery Approach to Olanzapine Orally Dispersible Tablet (ODT) in the Phase of Schizophrenia and Its Pharmacokinetics

  • Kim, Hyun-Jo;Park, Jeong-Hwan
    • Journal of Pharmaceutical Investigation
    • /
    • 제40권5호
    • /
    • pp.297-304
    • /
    • 2010
  • The present work focuses on preparation of olanzapine, orally dispersing tablets by direct compression method. Effect of super disintegrant crospovidone, disintegration time, drug content on in vitro release has been studied. A factorial design was employed in formulating a prompt dispersible tablet. The selected independent variables crospovidone and fmelt showed significant effect on dependent variables i.e. disintegration time and percent drug dissolved. Disintegration time and percent drug dissolved decreased with increase in the level of crospovidone. The similarity factor $f_2$ was found to be 97.48 for the developed formulation indicating the release was similar to that of the marketed formulation. Pharmacokinetics of olanzapine after single-dose oral administration of orally disintegrating tablet in normal volunteers were evaluated and the results showed that PK parameters (Cmax, Tmax, AUC) of the designed ODT matrix were similar to those of commercial product, Zyprexa Zydis$^{(R)}$ as a reference.

분산감소광섬유에서의 고차 솔리통 펄스 생성 및 압축을 통한 광시간분할다중시스템 광원의 제작에 대한 연구 (Higher-order soilton puliton pulse generation and compression in dispersion decreasing fiber for optical time division multiplexing system source applications)

  • 이덕기;김나영;박남규
    • 한국광학회지
    • /
    • 제11권2호
    • /
    • pp.102-107
    • /
    • 2000
  • 본 논문에서는 분산감소광섬유를 이용하여 정현파를 고차 솔리톤으로 진행시켜서 원하는 펄스 압축율을 얻은 후, 수반되는 pedestal을 반응시간이 빠른 포화 흡수제(Fast Saturable Absorber : FSA)로 제거하는 현실적인 방법을 제시하였다. 또한 DDF-MALM-DDF 구조를 제안하여 280 이상의 압축율과 변환 제한에 가까운 솔리톤 펄스열을 생성할 수 있도록 하였다. 그 결과로서 광시간분할다중시스템과 광샘플링 등에 이용될 수 있는, 10GHz의 반복율과 176 fs의 펄스폭을 가지는 고품질의 솔리톤 펄스열을 구현할 수 있는 시스템을 디자인하였다.

  • PDF

Structural lightweight concrete containing expanded poly-styrene beads; Engineering properties

  • Vakhshouri, Behnam
    • Steel and Composite Structures
    • /
    • 제34권4호
    • /
    • pp.581-597
    • /
    • 2020
  • Light-Weight Concrete containing Expanded Poly-Styrene Beads (EPS-LWC) is an approved structural and non-structural material characterized by a considerably lower density and higher structural efficiency, compared to concrete containing ordinary aggregates. The experimental campaign carried out in this project provides new information on the mechanical properties of structural EPS-LWC, with reference to the strength and tension (by splitting and in bending), the modulus of elasticity, the stress-strain curve in unconfined compression, the absorbed energy under compression and reinforcement-concrete bond. The properties measured at seven ages since casting, from 3 days to 91 days, in order to investigate their in-time evolution. Mathematical relationships are formulated as well, between the previous properties and time, since casting. The dependence of the compressive strength on the other mechanical properties of EPS-LWC is also described through an empirical relationship, which is shown to fit satisfactorily the experimental results.