• The Korean Journal of Applied Statistics
• /
• v.14 no.1
• /
• pp.103-110
• /
• 2001

This paper considers a multistage experiment. Response scales can be same or different from stage to stage. When variables are of nested structure, the response variable at each stage can be defined conditionally. For analysing such data with compound scales, this paper suggests a sequnce of dependence models and shows how to set up a sequence of models for the driver's liscense test data.

• Journal of the Korean institute of surface engineering
• /
• v.26 no.5
• /
• pp.235-244
• /
• 1993

The oxidation behavior of a two-phase(Ti3Al+TiAl) intermetallic compound, Ti-33.8wt%Al, has been in-vestigated in air at 800, 900 and $^1000{\circ}C$. Though the isothermal oxidation behavior followed a parabolic law up to 100$0^{\circ}C$ indicating that protective oxide scales were formed, the cyclic oxidation behavior followed a lin-ear law in the entire temperature range tested because flaky or stratified scales were usually spalled from the surface during cooling. During oxidation at 80$0^{\circ}C$, the alloy showed excellent oxidation resistance because continuous protective Al2O3 films were formed on the outermost surface of the alloy. However, above $900^{\circ}C$, the oxidation resistance of the alloy was decreased gradually because relatively non-protective TiO2 scales as well as some of Al2O3 scales were formed on the outer oxide scale. The oxidation mechanism of the alloy at different temperature was proposed.

• Journal of Conservation Science
• /
• v.38 no.1
• /
• pp.33-44
• /
• 2022

The study, iron-making process was examined through the scientific analysis of six by-products that were obtained during iron making at the Songdu-ri site in Jincheon. The total Fe content of the slags excavated from the Songdu-ri site was 36.29-54.61 wt%, whereas the deoxidation agent was 26.48-49.08 wt%. The compound analysis result indicated that fayalite and wüstite are the main compounds in slag. Furthermore, the microstructure analysis result confirmed the presence of fayalite and wüstite in the slag. It can be inferred from the flat shape in a bright matrix structure of the hammer scales that forging was performed in the latter stage. The Raman micro-spectroscopy results confirmed that the surface was hematite (Fe₂O₄), middle layer was magnetite (Fe₃O₄), and inner layer was wüstite (FeO). The presence of smelting and smithing slags, spheroid hammer scales, and flake hammer scales suggests that at the Songdu-ri site, iron-making process is carried out by division of labor into producing iron bloom through direct smelting, refining and forge welding, and ingot production.

• Animal cells and systems
• /
• v.10 no.3
• /
• pp.169-173
• /
• 2006

Zygomolgus dentatus n. sp. is described based on specimens from washings of compound ascidians from intertidal shores of Korea. It possesses the long caudal rami which are 5.6 times as long as their width, four scales on the convex side of mandible, and three setal elements and a large process on maxillule. Lichomolgides cuanensis Gotto, the only representative of the genus Lichomolgides, is transferred to the genus Zygomolgus.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.1
• /
• pp.25-33
• /
• 1986

Natural river channels usually have a deep section and one or two floodplains, which is called a compound channel. As the general method in the compound channel overestimates the discharge capacity, the momentum transfer due to interaction between the main channel flow and flow over its floodplain must be considered. Scale model experiments are performed for the rectangular main channel with an asymmetrical floodplain. Firstly, velocities are measured at various section grids. Secondary, boundary shear stresses are calculated from velocity distributions. Lastly, in order to determine the apparent shear force, the shear stress distributions are integrated along the wetted perimeter for the full cross-section and equated to the total weight force in the flow direction. The hydraulic characteristics in a compound channel are closely examined with the scales of length, velocity, boundary shear stress, and apparent shear force which are described with the various relationships.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.467-470
• /
• 2006

The earth volume which is the basis of all the construction has gone through great development so far with the use of construction machine; however, systematic studies on the related area is in need since the appropriate compound engineering method of earth volume equipments which is a key factor for shortening the project duration and cost reduction is not systematically established and it is dependent on experience. Reasonable mechanical earth volume should take into consideration of performance and characteristics of the equipment, the kind of project, scale and conditions in advance. Also, the optimum compound engineering should be planned by selecting several available scales of equipment. In this study, the earth volume estimate model is established for optimum compound engineering of earth volume equipment for mechanized earth volume equipment loading and moving stage among many stages of earth volume task using system dynamics technique. The optimum compound engineering model of the earth volume equipment produced as a result of this is expected to make reasonable decisions in the shortest time in selecting earth volume facility.

• Journal of the Korean institute of surface engineering
• /
• v.35 no.4
• /
• pp.193-198
• /
• 2002

Alloys of XD45 (Ti45A12Nb2Mn-0.8vol%TiB$_2$) and XD47 (Ti47A12Nb2Mn-0.8vol%TiB$_2$) were oxidized between 800 and $1000^{\circ}C$ in air, and their oxidation characteristics were studied. The oxide scales consisted primarily of an outer $TiO_2$ layer, an intermediate $Al_2$$O_3$-rich layer, and an inner mixed layer of ($TiO_2$+$Al_2$$O_3$). Nb tended to present at the lower part of the oxide scale, whereas Mn at the upper part of the oxide scale. The Pt marker tests indicated that the outer oxide layer grew primarily by the outward diffusion of Ti and Mn, and the inner mixed layer by the inward transport of oxygen.

• Ecology and Resilient Infrastructure
• /
• v.4 no.4
• /
• pp.207-215
• /
• 2017

Hydraulic issues such as flow resistance, side wall correction, sediment, erosion and deposition, and channel design have close relation with distribution of bed shear stresses but the measurement of the distribution of bed shear stresses is not easy. In this study the Preston tube which makes possible relatively simple measurement of bed shear stresses is used to analyze the characteristics of bed shear distribution in compound open channels with different depth ratio. The Preston tubes are made and calibrated to develop the calibration formula and then they are applied to measure bed shear stress distribution in 5 cases depth ratio condition of compound channels. The results are compared with former experiment data, and characteristics of bed shear stress distributions are studied with different channel scales and Reynolds numbers. Although bed shear distributions with depth ratio show overall agreement with former studies, some differences are verified in bed shear variation, formation of inflection point in main channel, and distribution near floodplain junction which are due to high Reynolds number. Through the study applicability of the Preston tubes are also verified and characteristics of bed shear distribution in compound channels are suggested with Reynolds number and depth ratio.

• Journal of Genetic Medicine
• /
• v.16 no.2
• /
• pp.62-66
• /
• 2019

Harlequin ichthyosis (HI, OMIM #242500) is one of the most severe skin diseases among the autosomal recessive congenital ichthyoses, with high morbidity and mortality, particularly in newborns. Clinically, it is characterized by a typical appearance of generalized, thick, yellowish, hyperkeratotic plates with deep erythematous fissures on the skin. Herein, we present the case of a newborn girl with HI that was genetically confirmed by targeted gene panel analysis. The premature baby was encased in an opaque white membrane with erosion covering the skin of the entire body except the lips, with her hands and feet restricted by the membrane. Humidification, emollient, and retinoic acid treatment were started; the thick ichthyosis gradually peeled off and the underlying skin was only covered with thin scales. Targeted gene panel analysis using next-generation sequencing and validation with Sanger sequencing and quantitative polymerase chain reaction analyses confirmed compound heterozygous mutations of the ABCA12 gene (p.N1380S and a partial gene deletion encompassing exon 9). The parents were carriers for each of the identified mutations. Early recognition of the genetic etiology of congenital ichthyosis can, thus, facilitate genetic counseling for patients and their families.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.5
• /
• pp.668-674
• /
• 2000

Objective : The classic and accepted surgical method of compound comminuted depressed skull fractures (FCCD) involves total resection of all the contaminated bone and fragments at the fracture site. A second operation for cranioplasty is then performed at a later date. However, we have believed that primary repair of these bony defects can be achieved by the replacement of bone fragments at the time of the initial debridement, and this can be accomplished without danger to patient. The authors retrospectively reviewed the surgical results to assess the advantages and disadvantages, and also propose the selection criteria of replacement of fractured bone fragments as a primary procedure in FCCD. Materials and Methods : The authors analyzed the data extracted from medical records, and radiological findings in 22 of 71 patients with FCCD, who underwent immediate replacement of fractured bone fragments between April 1993 and October 1998. The mean follow-up period was 13.7 months. The selection criteria for the operation included the patients with mild to moderate severity, regardless of the degree of contamination or dural violation, which presented in hospital within 24 hours of injury. Results : The ages of the patients varied from 4 to 63 years, and there were 20 males and 2 females. Seventeen of 22 patients were fully conscious on admission and the others also had relatively good Glasgow coma scales. Sixteen fractures were located in the frontal area, 9 with involvement of the frontal sinuses, and 6 in the parietal and temporoparietal areas. Of the 22 patients, 8(36.3%) had dural lacerations with 3 of these requiring patching with pericranium, and 12(54.5%) had intracranial hematoma requiring wide craniotomy. The degree of wound contamination was also variable. Fifteen patients had relatively clean wounds, while seven(31.8%) had seriously contaminated wounds with soil, sand, hair, and wood. Only one patient(4.5%) developed infection, and the bone fragments were removed. All wounds healed primarily without pulsatile defect, the skull has remained solid, and no complications have occurred, except the infected case. Conclusion : It is proposed that bone fragments removal for FCCD, regardless of the degree of contamination or dural violation, is not necessary and that primary bone fragments replacement avoids a second operation for cranioplasty.