• Journal of the Korean institute of surface engineering
• /
• v.36 no.6
• /
• pp.491-499
• /
• 2003

Copper-based leadframe sheets were oxidized in a hot alkaline solution to form brown-oxide layer on the surface and molded with epoxy molding compound (EMC). The brown-oxide-coated leadframe/EMC joints were machined to form sandwiched double-cantilever beam (SDCB) specimens and sandwiched Brazil-nut (SBN) specimens for the purpose of measuring the fracture toughness of leadframe/EMC interfaces. The SDCB and the SBN specimens were designed to measure the fracture toughness of the leadframe/EMC interfaces under nearly mode-I loading and mixed-mode (mode I ＋ mode II) loading conditions, respectively. Fracture surfaces were analyzed by various equipment such as glancing-angle XRD, SEM, AES, EDS and AFM to elucidate failure path. Results showed that failure occurred irregularly in the SDCB specimens, and oxidation time of 2 minutes divided the types of irregular failures into two classes. The failure in the SBN specimens was quite different from that in the SDCB specimens. The failure path in the SBN specimens was not dependent on the phase angle as well as the distance from tips of pre-cracks.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.5
• /
• pp.747-751
• /
• 2000

This study was carried out to improve the analysis method of gingerol compounds from ginger (Zingiber officinale Roscoe). Pungent components of ginger were extracted by acetone and lisolated by thin layer chromatography (TLC) and high performance liquid chromatography (HPLC) with LiChrosorb RP-18 column. Three homologues of gingerols were identified by HPLC-mass spectrometry (LC/MS) and nuclear magnetic resonance (NMR). The contents of [6]-, [8]- and [10]-gingerols in three homologues identified were 635.3 mg%, 206.6 mg% and 145.7 mg% in raw ginger, and were 418.2 mg%, 142.6 mg% and 103.3 mg% in ginger paste, respectively.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.495-500
• /
• 2006

Nowadays HCFCs refrigerant are restricted because it cause depletion of ozone layer. However, natural gases such as ammonia as an organic compound, propane and propylene as hydrocarbon are easy and cheap to obtain as well as environmental. Accordingly, this experiment apply the $NH_3$ and R22 to study the performance characteristic from the superheat control and compare the energy efficiency of two refrigerants from the high performance. The condensing pressure of refrigeration system is increased from 15bar to 16bar and degree of superheat is increased from 0 to $10^{\circ}C$ at each condensing pressure. As the result of experiment, when comparing the each COP, we knew the $NH_3$ is suitable as the alternative refrigerant of the R22.

• Journal of Integrative Natural Science
• /
• v.15 no.4
• /
• pp.137-144
• /
• 2022

This paper presents the effect of the supramolecular complex of GA (Glycyrrhizic acid) and Mt(menthol) and GA: Mt (4: 1) obtained on their basis can restore functional dysfunction of the liver mitochondria in alloxan diabetes, ie, inhibit lipid peroxidation. The hypoglycemic activity and mitochondrial membrane stabilizing properties of the supramolecular compound GA: Mt (4: 1) in alloxan diabetes were more pronounced than those of menthol, GA and its GK: Mt (2: 1) and GA: Mt (9: 1) compounds. According to the results obtained, the concentration of GA did not affect the peroxidation of lipid membranes of the liver mitochondria. However, a concentration of 15 μM of GA was found to reduce LPO (lipid peroxidation) formed by the effect of Fe²+ / ascorbate on the mitochondrial membrane by 58.0 ± 5.0% relative to control. The inhibitory effect of GA and its supramolecular compounds in different proportions with menthol on the peroxidation of lipids in rat heart and brain tissue has been studied

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.439-441
• /
• 2002

Cyanobacteria are the dominant micro flora in rice-fields, contributing significantly to fertility as a natural biofertilizer. Recent studies show a continuous depletion of the stratospheric ozone layer, and the consequent increase in solar UV-B (280-315 nm) radiation reaching the Earth's surface. UV-B radiation causes reduction in growth, survival, protein content, heterocyst frequency and fixation of carbon and nitrogen in many cyanobacteria. UV -B induced bleaching of pigments, disassembly of phycobilisomal complexes, thymine dimer formation and alterations in membrane permeability have also been encounterd in a number of cyanobacteria. However, certain cyanobacteria produce photoprotective compounds such as water soluble colorless mycosporine-like amino acids (MAAs) and the lipid soluble yellow-brown colored sheath pigment, scytonemin, to counteract the damaging effects of UV-B. Cyanobacteria, such as Anabaena sp., Nostoc commune, Scytonema sp. and Lyngbya sp. were isolated from rice fields and other habitats in India and screened for the presence of photoprotective compounds. A circadian induction of the synthesis of MAAs by UV -B was noted in a number of cyanobacteria. Polychromatic action spectra for the induction of MAAs in Anabaena sp. and Nostoc commune also show the induction to be UV-B dependent peaking at 290 nm. Another photoprotective compound, scytonemin, with an absorption maximum at 386 nm (also absorbs at 300, 278, 252 and 212 nm), was detected in many cyanobacteria. In conclusion, a particular cyanobacterium having photoprotective compounds may be a potent candidate as biofertilizer for crop plants.

• The Korea Journal of Herbology
• /
• v.24 no.4
• /
• pp.137-142
• /
• 2009

Objectives : This study was performed to investigate the antioxidant activities of isolated compounds from the shoot of Aralia elata. Methods : The methanol extract from the shoot of Aralia elata was fractionated into ethyl acetate, n-BuOH and $H_2O$ layers through solvent fractionation. Repeated silica gel, ODS column chromatography of n-BuOH layer afforded four flavonol glycosides. Their antioxidant activity was determined by measuring free radical scavenging activity by DPPH, ABTS and superoxide dismutase (SOD) like activity assay. Results : They were identified as quercetin 3,7-di-O-$\alpha$-rhamnopyranoside (1), quercetin 3-O-$\beta$-D-galactoside-7-O-$\alpha$-L-rhamnoside (2), kaempferol 3-O-$\beta$-glucosyl($1{\rightarrow}2$)-$\alpha$-rhamnoside-7-O-$\alpha$-rhamnoside (3) and quercetin 3-O-$\beta$-glucosyl($1{\rightarrow}2$)-$\alpha$-rhamnoside-7-O-$\beta$-rhamnoside (4) on the basis of spectroscopic data. The result showed that 1 is the most active compound in the DPPH and ABTS radical scavenging test. Conclusions : Isolated Compounds from the shoot of Aralia elata showed anti-oxidative effect.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.4
• /
• pp.531-537
• /
• 1999

A copper based leadframe was oxidized in brown-oxide forming solution, then the growth characteristics of brown oxide and the effect of brown-oxide formation on the adhesion strength of leadframe to epoxy molding compound (EMC) were studied by using sandwiched double cantilever beam (SDCB) specimens. The brown oxide is composed of fine acicular CuO, and its thickness increased up to ~150 nm within 2 minutes and saturated. Bare leadframe showed alomost no adhesion to EMC, while once the brown-oxide layer formed on the Surface of leadframe, the adhesion strength increased up to ~80 J/$\m^2$ within 2 minutes. Correlation between oxide thickness, $\delta$ and the adhesion strength in terms of interfacial fracture toughness, $G_{c}$ was linear. Considering the above results, we might conclude that the main adhesion mechanism of brown-oxide treated leadframe to EMC is mechanical interlocking, in which fine acicular CuO plays a major role.e.

• Korean Journal of Materials Research
• /
• v.33 no.9
• /
• pp.353-359
• /
• 2023

This study investigated the growth behavior and characteristics of compounds formed at the interface between a liquid Al-Si-Cu alloy and solid cast iron. Through microstructural analyses, it was observed that various AlFe and AlFeSi phases are formed at the interface, and the relative proportion of each phase changes when small amounts of strontium are added to the Al alloy. The results of the microstructural analysis indicate that the primary phases of the interfacial compounds in the Al-Si-Cu base alloy are Al₈Fe₂Si and Al_4.5FeSi. However, in the Sr-added alloys, significant amounts of binary AlFe intermetallic compounds such as Al₅Fe₂ and Al₁₃Fe₄ formed, in addition to the AlFeSi phases. The inclusion of Sr has a slight diminishing effect on the rate at which the interfacial compounds layer thickens during the time the liquid Al alloy is in contact with the cast iron. The study also discusses the nano-indentation hardness and micro-hardness of the interfacial phases.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.1
• /
• pp.26-35
• /
• 2024

Aluminum-induced crystallization (AIC) as a route to reduce the fabrication cost and to obtain polycrystalline Si (p-Si) thin-film of large grain size is a promising alternative of single-crystalline (s-Si) substrate or p-Si thin-film obtained by conventional methods such as solid phase crystallization (SPC) and laser-induced crystallization (LIC). As the AIC process occurs at the interface between a-Si and Al thin-films, there are various process and interface parameters. Also, it directly means that there is a certain parametric window to obtain p-Si of large grain size having uniform crystal orientation. In this article, we investigate the effect of the various process and interface parameters to obtain p-Si of large grain size and uniform crystal orientation from the literature review. We also suggest the potential use of the p-Si as a virtual substrate for the growth of various compound semiconductors in a form of low-dimension as well as thin-film as a way for their monolithic integration on Si.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.3
• /
• pp.293-301
• /
• 2008

A study on the operational variables of the UV-TiO$_2$ based photocatalytic air cleaning system was tried. In this study, to examine effects as various air cleaning system conditions, a duct-type reactor was made, and TiO$_2$ was immobilized on a stainless mesh. Benzene was chosen as a target compound. Removal experiments for benzene were done under different initial benzene concentration, air velocity, TiO$_2$ loading, area coated TiO$_2$ as the same TiO$_2$ loading, and UV light intensity conditions. During the experiments, relative humidity was 55%, and reactor temperature was 45$^{\circ}C$. As a result, the photocatalytic degradation of benzene decreased as the inlet concentration increased. But the photocatalytic degradation increased as the concentration boundary layer thickness, amount of TiO$_2$, area coated TiO$_2$ as the same amount of TiO$_2$, and UV light intensity increased. Based on results of current study, they can be applied to the design of air cleaning system over low level VOCs in the indoor air.