• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.402-407
• /
• 2008

Recent popularity in mobile electronics requires higher standard on the mechanical strength of electronic packaging. Thus, the method of soldering between chip and substrate in electronic packaging process is changing from conventional method using intermetallic compound to a new method using organic solderability preservative (OSP) in order to improve the stability and the reliability of final product. Since current organic solder preservatives have several serious problems like thermo-stability during packaging process, however, it is necessary to develop new OSPs having thermo-stability. The main purpose of this study is to investigate the effect of MeOH/IPA (Isopropyl alcohol) ratio on the fluxing of a new OSP, developed in previous research, andto find out an optimum formulation of flux components for the application of the OSP in current packaging process. As a result of this study, it was revealed that higher MeOH/IPA ratio in flux showed better performance of fluxing a new OSP.

• Journal of Technologic Dentistry
• /
• v.29 no.1
• /
• pp.121-131
• /
• 2007

A preparation process's conditions of aqueous sol which contains anatase-type nano titania particles with photocatalyic properties was established by using Yoldas process, so called, DCS(Destabilization of Colloidal Solution) process in this study. And crystal size change and phase transformation of titania particles in aqueous titania sol depending on reaction conditions was investigated by a light scattering method and XRD analysis of frozen dried powders, respectively. This sol with photo catalytic nano titania particles was used to the following hydrophilic hybrid coating film's fabrication and its properties was evaluated. Subsequently, for coating film using the above mentioned aqueous titania sol, non-aqueous titania sol was prepared without any chemical additives and its time stability according to aging time was investigate. By using the above mentioned aqueous titania sol and non-aqueous sol, a complex oxide coating sol for metal and ceramic substrate and a organic-inorganic hybrid coating sol for polymer substrate was prepared and it's hydrophilicity depending on UV irradiation conditions was evaluated. As a conclusions, the following results were obtained. (1)Aqueous titania sol The average particle size of titania in formed aqueous titania sol was distributed between 20$\sim$90nm range depending on reaction conditions. And the crystal phase of titania powders obtained by frozen drying method was changed from amorphous state to anatase and subsequently transformed to rutile crystal phase and it is attributed to concentration gradient in aqueous sol. (2)Non-aqueous titania sol Non-aqueous titania sol was prepared using methanol as a solvent and a little distilled water for hydrolysis and nitric acid as a catalyst were used. The obtained non-aqueous titania sol was stable at room temperature for 20 days. Additionally, non-aqueous titania sol with addition of chealating reagent such as acethylaceton and ethylene glycol prolonged the stability of sol by six months. (3)Complex sol and hybrid sol with super hydrophilicity The above mentioned aqueous titania sol as a main photocataylic component and non-aqueous titania sol as a binder for coating process was used to prepare a complex sol used for metal, ceramic and wood material substrate and also to prepare the organic-inorganic hybrid sol for polymer substrate such as polycarbonate and polyethylene, in which process APMS(3-Aminopropyltrimethoxysilane), GPTS(3-Glycidoxypropyl-trimethoxysilane) as a hydrophilic silane compound and HEMA(2-Hydroxyethyl methacrylate) as a forming network in hybrid coating film were used. The hybrid coating film such as prepared through this process showed a superhydrophilicity below 1$10^{\circ}$ depending on processing conditions and a pencil's hardness over 6 H.

• Journal of the Korea Concrete Institute
• /
• v.20 no.3
• /
• pp.283-290
• /
• 2008

The repair technique using surface impregnation of reactive compound is so effective for deteriorated concrete structures that many researches are recently focused on these works. Particularly, inorganic impregnant is regarded as ecofriendly material because there is no air-pollution during manufacturing process as well as field coating works. Furthermore, The delamination between old concrete and impregnated surface does not occur, resulting from different material characteristics. In order to evaluate the durability performance of surface-impregnated concrete, durability evaluation through the long-term exposure tests is significant, however, experiments are usually limited to the temporary and qualitative laboratorial scope. In this study, durability characteristics for inorganic and organic/inorganic impregnated concrete specimens are evaluated through longterm chloride exposure test. The specimens with 21MPa and 34MPa strength have been prepared and exposed to chloride attack in the atmospheric, tidal, and submerged conditions. Evaluation for compressive strength, chloride penetration, and electrical potential (half cell potential) for steel corrosion are performed for the specimens exposed for 2 years. From the results, no distinct strength gaining is observed but the resistance to chloride penetration and steel corrosion is evaluated to be improved through surface impregnation. The more improved resistance to chloride attack is measured in the inorganic impregnated concrete and the results from atmospheric condition show more improved resistance to chloride attack than those from submerged and tidal condition.

• Journal of Dairy Science and Biotechnology
• /
• v.34 no.2
• /
• pp.91-98
• /
• 2016

The goal of this study was to develop hydrolyzed whey protein powder (23%-GNANA) manufactured with high content of sialic acid, a marker compound that is usually present at 7% concentration in GMP obtained from the milk protein. It is a safe food, used worldwide in infant and baby foods, etc. The test substance was prepared using (7% sialic acid containing) GMP as a raw material. Alcalase, an enzyme approved as a food additive, was used after separating sialic acid, with 100% efficiency, and 23%-GNANA (composed of 23% sialic acid and protein; product name: HELICOBACTROL-23), provided by MEDINUTROL Inc. (Korea), manufactured to have high (23%) content through ethanol soaking and enrichment. Bacterial reverse mutation (Ames) test was conducted in accordance with the GLP Guideline using the test substance specified above. To detect its mutagenicity potential in microorganisms, histidine auxotrophic strains of Salmonella typhimurium, TA98, TA100, TA1535, and TA1537, and tryptophan auxotrophic Escherichia coli strain, WP2uvrA, were used. The bacterial reverse mutation (Ames) test was performed using five concentrations of the test substances (0, 61.7, 185, 556, 1,670, $5,000{\mu}g/plate$). The evaluation did not reveal repetitive increase of colony generating values and positive criteria for reverse mutagenicity for any tested concentration in the five strains regardless of the presence of metabolic activation system, and no dose-dependency. In conclusion, the safety of 23%-GNANA test substance was verified by the bacterial reverse mutation test conducted before registration of 23%-GNANA as a food additive.

• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.517-522
• /
• 2020

Electron beam have many factors that affect dose distribution, so even if identical settings are used, they should be identified and used for radiation treatment, and the effects on the structures in the body are sensitive, making it difficult to investigate uniform dose distribution on tumors. In this study, a dosimeter was produced using PbI₂ which is a photoelectric material, and electrical characteristics were analyzed for 6, 9, and 12 MeV electronics in linear accelerators. The reproducibility test results showed that RSD were 1.1215%, 1.0160%, and 0.05137% respectively at 6, 9, and 12 MeV energies, indicating that the output signals were stable. The linearity evaluation results showed that the R² values of the reliability indicator for straight line trend lines were 0.9999, 0.9999, and 0.9994, respectively, at 6, 9, and 12 MeV, to confirm that the output signal was proportional to PbI₂ as dose increased. The PbI₂ dosimeter in this study is judged to be highly applicable to electromagnet measurement and is thought to be able to be used as a basic study of electron detector through photoelectric material.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.6
• /
• pp.791-798
• /
• 2014

Cirsium setidens Nakai, a wild perennial, is widely consumed as a food and traditional medicine in Korea. In addition, diverse functionalities of C. setidens Nakai, including anti-inflammatory and antioxidant effects, have been reported. However, whether or not C. setidens Nakai and its major compound, pectolinarin have high nutritional value and functional properties remains unknown. This paper investigated the proximate compositions, mineral contents, hepatoprotective activities, hepatic fat accumulation inhibitory activities, and anti-inflammatory and anti-oxidant activities of C. setidens Nakai and its component parts, including of pectolinarin. The result showed that C. setidens Nakai and its major compounds have potential as a functional food material with natural antioxidant and anti-inflammatory activities.

• The Research Journal of the Costume Culture
• /
• v.11 no.2
• /
• pp.275-292
• /
• 2003

The purpose of this study is to recognize the aesthetic characteristics of the Maximalism depicted in contemporary costumes of new millennium. This is done by analyzing and examining the social and cultural background of fashion in the few years of 21st century. The fashion trend of the beginning of 21st century was coexisted conflicting factors with ultramodern factor and past recurrent factor. For that reason, new millennium is to be existence background of Maximalism style in contemporary costumes. The social and cultural background of Maximalism was regarded as characteristics of the Glocalism, fusion style, bobos. Glocalism means a compound word of Globalism and Localism, and used various fields of policy, economics, society etc. Consequently, the aesthetic formativeness of Maximalism of the contemporary costumes was investigated as the 'Romantic Hippie Look' and 'Romantic Sports Look' 1) Romantic Hippie Look New millennium fashion trend is affected by hippie style of 1970's. That is major reason that the antiwar consciousness of 9.11 terror, USA-Afganistan war and the economic depression is similar to 1970's situation. Accordingly, fashion trend is developed into bright, light, romantic style and fashion designers chose materials with flowers, butterflies, dragonflies pattern. Because the clothing of these material reflects well modern people's feeling to escape misgivings, unrest of political terror, war etc. The characteristics of hippie style expressed freedom as the greatest merit was raised new trend, so called 'Romantic Hippie Look' on new millennium. That is, the romantic hippie look of the contemporary costumes is depicted as the formative beauty of the multiculturalism and nationalism. 2) Romantic Sports Look : The beginning of new millennium, many fashion designers intend to graft the details of sports wear on order made or ready made clothing and try to show luxury and cheerful fashion design with combination of sporty and romantic factors. Accordingly, theses fashion trends expressed 'Romantic Sports Look' with a harmony or disharmony of unusual factors. The fashion trend of new millennium centering around special cities like New York, Paris, Milan moved to various regional culture. Accordingly, the features of fashion depicted not unique theme but multiplicity of the clothing of dissimilar style or material by the mixture of 2 or 3 factors like the fusion of femininity and masculinity and the combination of past and present of details. That is, the romantic sports look of the contemporary costumes is depicted as the formative beauty of the multi-functional and crossover.

• Advances in Traditional Medicine
• /
• v.7 no.3
• /
• pp.235-243
• /
• 2007

Anemarrhenae Rhizoma (AR) is used in traditional oriental medicine for various medicinal purposes. However, the exact mechanism that accounts for the anti-allergy and anti-inflammatory effects of the AR is still not fully understood. The aim of The present study is to elucidate whether and how AR modulates the allergic reactions in vivo, and inflammatory reaction in vitro. In this study, we showed that AR significantly decreased compound 48/80-induced systemic anaphylaxis, paw oedema, and histamine release from preparation of rat peritoneal mast cells. Also, AR inhibited the expression of inflammatory cytokine in PMA plus A23187-stimulated human mast cells (HMC-1). In addition, we showed that anti-inflammatory mechanism of AR is through suppression of nuclear factor-${\kappa}B$ activation $I{\kappa}B-{\alpha}$degradation. These results provided new insight into the pharmacological actions of AR as a potential molecule for therapy of inflammatory allergic diseases.

• Journal of Conservation Science
• /
• v.33 no.4
• /
• pp.297-312
• /
• 2017

In the ancient iron-making process, a slag former was often added so that iron and other minerals in the ore could be smoothly separated. However, there are insufficient data for judging whether a slag former was added. Thus, in this study, we conducted a smelting experiment to understand the material characteristics of a steel structure that differed depending on the addition of a slag former. It was found that the steel structure produced in the first experiment had a total Fe content of 39.45-52.94 wt%, which decreased to 34.89-38.92 wt% in the second and third experiments. CaO compounds such as calcite, gehlenite, and hercynite appeared, in addition to iron oxides, after the addition of a slag former. As a result of an assessment of whether a slag former was added by comparing the ratio between the components, it was found that the ratio of $CaO/SiO_2$ was 0.42. From a comparative analysis of $Al_2O_3/SiO_2$ and $CaO/SiO_2$, it was judged that the ratio of $Al_2O_3$ and $SiO_2$ can be utilized as an index to judge similar systems of smelting process (ore, furnace wall, and fuel).

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.6
• /
• pp.561-567
• /
• 2010

In this study, we evaluated optimal conditions for ethanol production of the spruce hydrolysate (SH) obtained from diethyl oxalate pretreatment. Fermentable sugar concentration in SH was 29.04 g/${\ell}$ except arabinose. Monosaccharides obtained from the oligomer degradation were mainly mannose (39.26 g/${\ell}$) and galactose (12.83 g/${\ell}$). Concentration of 5-HMF and furfural which are inhibitors on ethanol fermentation were 0.09 g/${\ell}$ and 0.04 g/${\ell}$ respectively. Concentration of acetic acid and total phenolic compounds in SH were 1.4 g/${\ell}$ and 2.83 g/${\ell}$. Ethanol production using hydrolysate was 11.7 g/${\ell}$ at optimal pH 6.0 after 48 h. Specific ethanol production was 0.15 (g/(${\ell}^*h$)) at pH 5.0 and 5.5. while that was 0.24 (g/(${\ell}^*h$)) at pH 6.0. Specific ethanol production has difference depend on initial pH for fermentation. Ethanol production was 14.3 g/${\ell}$ after 48 h when xylanase 20 IU was added in SH for degradation of oligomer during fermentation. It implied that ethanol production increased by 22.2% compare with control (without xylanase).