• 복식
• /
• 제57권1호
• /
• pp.93-104
• /
• 2007

This study is considered about the fabrics culture of Baekje Period by analyzing the fabrics pieces at a inner part of the It-bronze shoes found at the tomb of King Mu-ryeong in 1971 AD. The analysis methods of the fabrics pieces are a photographing of fabrics pieces surface by VMS, Digital camera(Nikon Coolpix 995) and the analysis of samples by SEM, XRD and FT-IR. It is assumed this fabrics pieces are the inner shoes, which consisted of compound woven silk at outward, some of tabby and a hemp at inward and the braids for decoration, of the gilt-bronze shoes. The features are as follows. 1. All of compound woven silk are the warp-faced compound tabby of plain fabrics and the density is various from high to low one. Compound woven silk which is attached the gilt-bronze shoes of the tomb of King Mu-ryeong weaves in high density by a thick thread. The fibers material of compound woven silk prove to be a silk by the analysis of wrap samples by SEM, XRD and FT-IR. 2. Tabby are excavated under the condition which attached on reverse side of compound woven silk. Those ran classify two types. First, the fine weaving by high density of wrap and weft. Second, the loose warp weaving with one warp and some of weft. 3. Hemp is almost ramie by SEM analysis and the density is different. Ramie which supposed to be attached Guem has the very low density. In addition to, Ramie pieces, excavated in condition and weaved finely, proved the conspicuous weaving skill in Baekje period. 4. Various kinds of braid are found and these ones classifies by fiber material and entwining way. Two types out of these are the one of silk thread, decorates the upper, middle parts of compound woven silk shoes and the other of hemp thread, decorates the lower parts.

• Bulletin of the Korean Chemical Society
• /
• 제32권10호
• /
• pp.3802-3804
• /
• 2011

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.414-415
• /
• 2005

A solar cell is an element to transform the solar light energy into the electric energy in a moment. The single crystal element of high quality on which many studies were conducted in the past has a high efficiency of energy transformation, but its price competitiveness is so poor that it has failed to be popularized However, recently, in terms of an environment-friendly alternative energy, studies on applicability of the polycrystal solar cell have been actively under way. Among subject substances for such solar cell, $CuInSe_2$ has several good physical properties so that the greatest attention is paid to it as an optical absorption layer material for a low-cost solar cell of high efficiency. In order to manufacture the $CuInSe_2$ compound thin film, the unit element was deposited by using the sputtering method and the evaporation method and the heat treatment process was used in an electric furnace. Thereby, we intended to get a single-phase $CuInSe_2$ compound thin film.

• 한국산업융합학회 논문집
• /
• 제13권4호
• /
• pp.191-196
• /
• 2010

This study explores the solution of a variety of conditions of the natural dyeing with the Mulberry. To obtain this, the Cu complex compound was added into the extracts. The Mulberry extract was added the Copper acetate to obtain the Black sediment the metal complex compound of anthocyanidin. According to the result of using the complex compound of the solid material, the dyeing properties were excellent. The metal complex compound acted as a mordant, thus it reduced the process of mordanting in the natural dying.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.123-128
• /
• 1996

As electrode materials like as Cu-Pb, Cu-Bi, WC-Ag, W-Ag for vacuum circuit breaker have high chopping current or bad insulation-recovery characteristics, it can affect induction machinery like as transformer and motor. To produce low surge electrode material, it have been suggested Co-Ag-Te electrode which were infiltrated with Ag-Te intermetallic compound into sintered Co matrix in vacuum. In this paper, we would like to represent that production method and microstructure of Co-Ag-Te electrode material in each condition. The microstructure and characteristics of Ag-Te intermetallic compound and Co-(Ag-Te) electrode were investigated by using optical microscope, SEM, XRD, EPMA.

• 대한기계학회논문집A
• /
• 제32권6호
• /
• pp.488-495
• /
• 2008

In order to achieve long fatigue lifetimes for cyclically pressurized thick cylinders, multi-layered compound cylinder has been proposed. Such compound cylinder involves a shrink-fit procedure incorporating a monobloc tube which has previously undergone autofrettage. The basic autofrettage theory assumes elastic-perfectly plastic behaviour. Because of the Bauschinger effect and strain-hardening, most materials do not display elastic-perfectly plastic properties and consequently various autofrettage mo dels are based on different simplified material strain-hardening models, which is assumed that combination of linear strain-hardenig and power strain-hardening model. This approach gives a more accurate prediction than the elastic-perfectly plastic model and is suitable for different strain-hardening materials. In this paper, a general autofrettage model that incorporates the material strain-hardening relationship and the Bauschinger effect, based upon the actual tensile-compressive stress-strain curve of a material was proposed. The model was obtained using the von Mises yield criterion and plane strain condition. The tensile-compressive stress-strain curve was obtained by experiment. The parameters needed in the model were determined by fitting the actual tensile-compressive curve of the material. Finally, strain- hardening model was compared with elastic-perfectly plastic model.

• Elastomers and Composites
• /
• 제44권1호
• /
• pp.47-54
• /
• 2009

본 연구에서는 다양한 종류의 보강제를 혼합한 EPDM 컴파운드의 원적외선에 의한 가교 반응을 조사하였다. 보강제가 원적외선에 의한 가교 반응에 미치는 영향을 평가하기 위하여 컴파운드의 발열 온도 및 DSC 분석에 의한 가교도를 측정하였으며, 특히 원적외선에 의한 가교 특성을 비교하기 위하여 동일 조건에서 열풍에 의한 가교 반응을 조사하였다. 원적외선 가교 조건에서 카본블랙을 혼합한 EPDM 컴파운드는 입자크기가 증가함에 따라 열전도도가 증가하며 이에 따라 원적외선에 의한 가교도 역시 증가하였으나, 열풍에 의한 가교도의 변화에는 거의 영향을 주지 못하였다. 보강제 종류에 따른 원적외선 가교 특성 평가 결과, 열전도도가 높은 아세틸렌 블랙을 함유한 컴파운드의 가교도가 가장 높게 나타났으며, 열전도도가 유사한 카본블랙 및 침강실리카의 경우 상대적으로 원적외선 흡수 특성이 우수한 침강실리카 배합 컴파운드의 경우 원적외선에 의한 가교도가 높게 나타났다.

• 열처리공학회지
• /
• 제37권2호
• /
• pp.49-57
• /
• 2024

We investigated the changes in microstructure and surface roughness of the compound layer of GC250D gray cast iron, commonly used in brake discs, during gas nitriding. The gas atmosphere of the nitriding process was controlled with a hydrogen partial pressure of 49.5%, and the process was conducted at a nitriding temperature of 520℃ with various process times. As the nitriding process time of the GC250D material increased, both the depth of hardening and the thickness of the compound layer increased, with a maximum surface hardness of approximately 1265 HV_0.1 was measured. Additionally, the surface roughness increased with the process time. Phase analysis of the compound layer revealed an increase in the proportion of the γ' phase as the nitriding process time increased. Changes in the formation of the compound layer were observed depending on the orientation of graphite within the material, leading to the formation of wedges. Therefore, the increase in surface roughness appears to be attributed to the uneven compounds, the expansion of the compound layer and wedges formed on the surface during the nitriding process.

• 설비공학논문집
• /
• 제17권12호
• /
• pp.1123-1131
• /
• 2005

The floor material is known as the most influential emission source of the residential building, because most floor material is made of wood compound and adhesive like a plywood flooring. Moreover, floor heating system keeps the inside temperature of the material high. As the emission of hazardous chemical compound from the construction material is influenced by many factors, it is necessary to analyze the emission characteristics of the floor material to improve IAQ. In this study, numerical analysis is performed to investigate the emission characteristics of the floor material affected by several factors such as temperature, air exchange rate, initial concentration, and internal diffusion coefficient. A simulation program is also written based on the mass transfer theory. The simulation results show that there is some level of difference on the TVOC concentration when each of the factors is variable.

• 약학회지
• /
• 제30권6호
• /
• pp.348-351
• /
• 1986

New synthetic method for methyl-7-iodoheptanoate was studied. Methyl-7-iodoheptanoate is important compound in the synthesis codlemone, the sex pheromone of codling moth which doing harm to apple tree significantly, and this compound also be used essentially in the synthesis of prostaglandin derivatives. In previous the methyl-7-iodoheptanoate has been prepared from-7-chloroheptanoic acid as a starting material with disadvantage, since the 7-chloroheptanoic acid is expensive and the process is much complicate. In this paper the method to preparing methyl-7-iodoheptanoate was developed economically by using dihydropyran as a starting material in the course of 5 steps. Hence, methyl-7-iodoheptanoate which can be synthesized by new method studied onthis paper should be very useful compound for preparing codlemone or its acetate which will be used to developing pollution-free insecticides, and for preparing prostaglandin derivatives with advantage.