• 한국항해항만학회지
• /
• 제31권8호
• /
• pp.671-674
• /
• 2007

본 논문에서는 ETC 시스템에서 다중반사로 인한 오신호 또는 시스템간의 간섭을 방지하기 위하여 사용될 전파흡수체를 설계 및 제작하였다. 자성손실 재료인 MnZn-ferrite, 도전손실 재료인 Carbon과 지지재인 CPE를 사용하여 조성비별로 전파흡수체 샘플을 제작하고, 측정된 샘플의 데이터로부터 최적의 조성비가 MnZn-ferrite : Carbon : CPE = 40 : 15 : 45 wt% 임이 확인되었다. 확인된 샘플로부터 재료정수 복소비유전율과 복소비투자율을 계산하여 시뮬레이션 하였으며, 이 결과를 토대로 전파흡수체를 실제 제작하여 전파흡수능을 분석한 결과 시뮬레이션과 실제측정 값이 거의 일치하는 것을 볼 수 있었다. 결과적으로 전파흡수체의 조성비 MnZn-ferrite : Carbon : CPE = 40 : 15 : 45 wt% 로 두께 3.38 mm, 주파수 5.8 GHz대에서 전파흡수능 20 dB 이상의 전파흡수체를 개발하였다.

• 한국항해항만학회지
• /
• 제33권3호
• /
• pp.193-197
• /
• 2009

본 논문에서는 실내 무선LAN 환경에서 발생하는 다중반사에 의한 통신속도 저하 및 데이터 손실과 같은 문제점을 해결하기 위한 전파흡수체를 설계하였다. 먼저 자성손실 재료인 Sendust와 지지재인 CPE(Chlorinated Polyethylene)조성비별 전파흡수체 샘플을 제작하였고, 각 샘플의 재료정수를 이용하여 시뮬레이션 한 결과, 최적의 조성비가 Sendust : CPE = 80 : 20 wt.% 임을 확인하였다. 그리고 시뮬레이션 결과를 토대로 전파흡수체를 실제작하였다. 제작된 전파흡수체의 측정 결과 시뮬레이션 결과와 잘 일치하였으며, 제작된 전파흡수체는 두께 3.2 5mm 조성비 Sendust : CPE = 80 20 wt.%이며, 중심주파수 2.4 GHz에서 19 dB의 전파흡수 특성을 보였다.

• 반도체디스플레이기술학회지
• /
• 제10권3호
• /
• pp.29-33
• /
• 2011

Film growth rate and composition variation are numerically analyzed during the selective area growth of InGaN on the GaN triangular stripe microfacet in this study. Both the vapor phase diffusion and the surface diffusion are considered to determine the In composition on the InGaN surface. To obtain the In composition on the surface, flux of In atoms due to the surface diffusion is added to the concentration determined from the Laplace equation which is governing the gas phase diffusion. The solution model is validated by comparing the growth rates from the analyses to the experimental results of GaN and InN films. The In composition and resulting wave length are increased when the surface diffusion is considered. The In content is also increased according to the increasing mask width. The effect of mask width to the In content and wave length is increasing in the case of a small open region.

• 대한한의진단학회지
• /
• 제16권3호
• /
• pp.1-10
• /
• 2012

Objectives: The purpose of this study is to observe clinically the anti-cholesterol effects on the prescription of red onion. Materials and methods: The subject of study were middle-aged people. We measured clinically physiological index, body composition, radial arterial pulse wave after 2 month by taking medicine (the prescription of red onion) Results: The study results were as follows. 1. Systolic and diastolic blood pressure of subjects were decreased significantly in the statistics. 2. Total cholesterol and low-density lipoprotein were decreased significantly after 2 month taking medicine. Triglyceride was decreased after 2 month but there was no significant difference and high density lipoprotein was increased after 2 month but there was no significant difference. 3. Waist-Hip ratio, body mass index and body fat percentage were decreased significantly in the statistics, after 2 month taking medicine. 4. HR was increased significantly in the statistics after 2 month but ESV and ECO were decreased signficantly in the statistics after 2 month taking medicine. 5. Pulse wave energy was increased after 2 month but there was no significant difference in the statistics. 6. RAI was decreased significantly in the statistics after 2 month taking medicine. Conclusion: The prescription of purple onion was showed significant change in physiological index, character of body composition, blood circulation index, pulse wave energy and RAI. Therefore it was showed the effect of anti-cholesterol blood circulation clinically. In the future, with diversified study on effect of prescription of purple onion, Oriental medicinal herbs will be used extensively.

• 한국항해항만학회지
• /
• 제35권9호
• /
• pp.717-720
• /
• 2011

In this paper, we designed and fabricated the Electromagnetic(EM) wave absorber for an Electronic Toll Collection(ETC or Hi-pass) system by using Amorphous metal powder and CPE. The material properties and the absorption properties of the samples containing 50 wt.%, 60 wt.%, 70 wt.%, and 80 wt.% of Amorphous. Moreover, the EM wave absorption abilities were simulated for the different thicknesses of the EM absorbers by adopting the measured permittivity and permeability, and then the EM wave absorber was fabricated based on the simulated design values. As a result, the EM wave absorber with the composition of Amorphous metal powder : CPE = 50 : 50 wt.% with the thickness of 2.6 mm has excellent absorption ability more than 40 dB at 5.8 GHz.

• Journal of electromagnetic engineering and science
• /
• 제8권3호
• /
• pp.110-113
• /
• 2008

In this paper, we designed and fabricated an electromagnetic(EM) wave absorber for automotive radar in cars using $TiO_2$ as a dielectric material and chlorinated polyethylene(CPE) as a binder. First of all, we confirmed that the optimum composition ratio of $TiO_2$ was about 70 wt.%. The complex relative permittivity of a sample containing $TiO_2$: CPE=70:30 wt.% was calculated from S-parameter. The EM wave absorption abilities were simulated for the EM wave absorbers of different thickness using the calculated relative permittivity, and the EM wave absorber was manufactured based on the simulated design. A comparison of simulated and measured results is in good agreement. Measurement shows that a 1.85 mm thick absorber has absorption ability higher than 20 dB in the frequency range of $76{\sim}77$ GHz for automotive radars.

• Steel and Composite Structures
• /
• 제31권6호
• /
• pp.641-653
• /
• 2019

In this paper, wave propagation is studied and analyzed in double-layered nanotubes systems via the nonlocal strain gradient theory. To the author's knowledge, the present paper is the first to investigate the wave propagation characteristics of double-layered porous nanotubes systems. It is generally considered that the material properties of nanotubes are related to the porosity and hygro-thermal effects. The governing equations of the double-layered nanotubes systems are derived by using the Hamilton principle. The dispersion relations and displacement fields of wave propagation in the double nanotubes systems which experience three different types of motion are obtained and discussed. The results show that the phase velocities of the double nanotubes systems depend on porosity, humidity change, temperature change, material composition, non-local parameter, strain gradient parameter, interlayer spring, and wave number.

• 대한전자공학회논문지TC
• /
• 제43권9호
• /
• pp.1-5
• /
• 2006

본 논문에서는 ITS 기반의 기본 센서인 차량 충돌방지 레이더의 허상으로 인한 오신호 또는 시스템간의 상호 간섭을 방지하기 위하여 전파흡수체를 설계 및 제작하였다. 먼저 도전손실 재료인 카본과 지지재인 CPE를 이용하여 조성비별 전파흡수체 샘플을 제작하고, 측정데이터로부터 최적의 조성비가 카본:CPE=20:80 wt% 임을 확인하였다. 그리고 이 샘플로부터 재료정수인 복소비유전율을 계산하여 시뮬레이션을 하였으며, 시뮬레이션 결과를 토대로 전파흡수체를 실제작하여 전파흡수능을 비교 분석한 결과 시뮬레이션값과 측정값이 잘 일치하였다. 결과적으로 조성비 카본:CPE=20:80 wt%로 전파흡수체 두께 2 mm 주파수 범위 $76{\sim}77$ GHz에서 전파흡수능 20 dB 이상으로 전파흡수체를 개발하였다.

• 한국항해항만학회지
• /
• 제34권1호
• /
• pp.27-31
• /
• 2010

본 논문에서는 항만 물류 시스템에서 사용하는 중심주파수 433 MHz에서 동작하는 전파흡수체를 설계 개발하였다. 먼저 자성손실 재료인 AMP (Amorphous Metal Powder)와 지지재인 CPE (Chlorinated Polyethylene)를 이용하여 AMP:CPE의 조성비가 각각 80:20 wt.%와 85:15 wt.%의 전파흡수체 샘플을 제작한 후, 입력임피던스를 측정하여 샘플의 재료정수를 계산하고 시뮬레이션에 의하여 최적의 전파흡수체를 설계하였다. 그 결과 AMP:CPE=85:15 wt.% 의 조성비에 두께 5.5 mm일 때 최적의 전파흡수특성이 얻어짐을 확인하고, 실제 제작하여 측정한 결과 433 MHz 주파수대역에서 17.5 dB의 흡수능이 얻어졌으며, 이는 본 연구에서 목표로 하는 15 dB 보다 우수한 결과이다.

• 한국조명전기설비학회지:조명전기설비
• /
• 제9권5호
• /
• pp.51-56
• /
• 1995

The transistors of single phase 3 level PWM Inverter compose output power transistors and neutral point clamping transistors, which are NPN transistors. Waveforms of driving signals for this are PWM waves for power transistors and period operating waves for neutral point clamping transistors, which signals made W-type modulation from rectangular and sine wave. The output power transistors operate at ON-time complementary and neutral point clamping transistors operate at OFF-time complementary respectively. Therefore, each transistors operate in half period at parallel. Characteristics of this inverter circuit is parallel switching method about series switching method of general inverter. As modulation of 3 level drive signals made from full-wave rectifier of sine wave and rectangular wave, which are level wave about 3 level of complementary transistor inverter. So, this circuit composed complementary operation inverter of NPN transistors only compare with PNP-NPN complementary inverter, which have high power 3 level inverter of complementary operation.