• 한국재료학회지
• /
• 제5권7호
• /
• pp.869-879
• /
• 1995

TiAi intermetallic compound has been extensively studied for possible high temperature structural applications because of its high specific strength at high temperature, high creep resistance, and good oxidation resistance at elevated temperatures. In addition to its good properties, an economic manufacturing routes should be developed for this material to be used more extensively. One of the promising route in manufacturing TiAl intermetallics is the Self-propagating High-temperature Synthesis (SHS) method. Thus in this study, an attempt was made to study the mechanism of the SHS process in TiAl synthesis. The composition of the sample was Ti-(45, 50, 53)at% Al and the microstuctures of the products were analyzed using optical microscope and scanning electron microscope. When the phases formed at the main SHS reaction of whicyh combustion temperature is higher than the melting temperature of aluminum were identified as TiAl and Ti$_3$Al ; Ti$_3$Al cores surrounded by TiAl phase. In order to increase the combustion temperature, carbon was added 5 and 10at.%. When the carbon content was 10at.%, the heat of the reaction was large enough to melt the phase formed and that is consistent with the theoretical calculation results of the adiabatic temperature. The combution temperatue, which was measured by a computer data acquisition system, increased with the carbon content. The phases formed from the reaction involving the carbon added were indentified as TiAl and Ti$_2$AlC using XRD. The vickers hardness of the reaction product increased with the carbon content.

• 농촌계획
• /
• 제24권1호
• /
• pp.99-111
• /
• 2018

This study was conducted for the purpose of deriving implications by observing the changing patterns and characteristics of the farmland reduction area in urban vicinity with Gimhae city, Gyeongsangnam-do as the subject. In order to achieve this goal, we first examined the problems and possibilities of farmland reduction area in urban vicinity through a theoretical review. Additionally, the characteristics of land use and community were examined for Gimhae city, Gyeongsangnam-do. The results of the study are summarized as follows. First, for 35 years from 1981 to 2015, Gimhae decreased $50.52km^2$ of farmland, which is about 17.4 times that of Yoido, and about 69.4% of the decreased farmland area. Second, the decrease in agricultural land has been expanding to the whole of Gimhae City from 1990 to 2010, and has been continuing since 2010 around dong-area. Third, in the farmland reduction area in urban vicinity, the number of settlements increases rapidly, but the aging population also increases. Fourth, the composition of the community is getting complicated with the change of the members. Taken together, it is necessary to manage the area efficiently because rapid change is present in the farmland reduction area in urban vicinity. Based on this, the implications are summarized as follows. First, there is a change in land use due to the reduction of farmland not designated as agricultural development region. Therefore, it is necessary to supplement the farmland-conversion standard. Second, despite the fact that land use management has been carried out, there have been problems such as uncontrolled development due to the development pressure beyond institutional management, and therefore it is necessary to improve the structural defects of the pertinent legal system. Fourth, while the traditional farming activities are decreasing with the decrease of agricultural land area, the increase in farms with secondary jobs and the urban-rural interchanges organization's efforts can lead to increased visits from outsiders that seek rural tourism and experiential learning.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.389-389
• /
• 2012

Molybdenum is one of the most important materials used as a back ohmic contact for $Cu(In,Ga)(Se,S)_2$ (CIGS) solar cells because it has good electrical properties as an inert and mechanically durable substrate during the absorber film growth. Sputter deposition is the common deposition process for Mo thin films. Molybdenum thin films were deposited on soda lime glass (SLG) substrates using direct-current planar magnetron sputtering technique. The outdiffusion of Na from the SLG through the Mo film to the CIGS based solar cell, also plays an important role in enhancing the device electrical properties and its performance. The structure, surface morphology and electrical characteristics of Mo thin films are generally dependent on deposition parameters such as DC power, pressure, distance between target and substrate, and deposition temperature. The aim of the present study is to show the resistivity of Mo layers, their crystallinity and morphologies, which are influenced by the substrate temperature. The thickness of Mo films is measured by Tencor-P1 profiler. The crystal structures are analyzed using X-ray diffraction (XRD: X'Pert MPD PRO / Philips). The resistivity of Mo thin films was measured by Hall effect measurement system (HMS-3000/0.55T). The surface morphology and grain shape of the films were examined by field emission scanning electron microscopy (FESEM: Hitachi S-4300). The chemical composition of the films was obtained by the energy dispersive X-ray spectroscopy (EDX). Finally the optimum substrate temperature as well as deposition conditions for Mo thin films will be developed.

• 한국정보시스템학회:학술대회논문집
• /
• 한국정보시스템학회 2000년도 추계학술대회
• /
• pp.26-31
• /
• 2000

It is said that the focus of managing venture business is currently moving from technology competition to management competition. By the way, the software venture business(SVB) has some weak points in its structural composition and itematization and no professional personnel in other several sections except technology development section. In addition, such basic functions as technology and R & D, finance and accounting, marketing required to the management of business are concentrated on only one man, its representative director. Therefore, this study aims to provide the basic data useful to the establishment of governmental policy in information and communication, to the rearing of the SVB by a local government related to the software, and to the administration of SVB by investigating the actual conditions. This study attempts to examine the literature on venture business and software industry, and its management with a questionnaire about the actual conditions of managing the SVB. The questionnaire is given to 527 local enterprises belonging to the Software Industry Association and to 171 enterprises in the Software Center. This study compromises the characteristics of the SVB, the actual conditions of its technology and R & D, finance and accounting, and marketing. The characteristics of the SVB are classified into categories such as the stage of its growth(the stage of its seed and start-up, the stage of tis development and growth, the stage of its stability and maturity) and the main business(the system integration, the software development for contract, the package software development service, the software-related service). Additionally, the study attempts to analyze positively the actual condition of its management after classified by the areas of business profile, its general management, its technology development, its finance and accounting, and its marketing The result of this study is found that the SVB has a lot of troubles in part of marketing and finance & accounting activity as well as general management. The SVB realizes the importance of the technology development rather than that of management activity including marketing activity. So we expect this study can assist the SVB to establish the business guidelines for own management plans.

• Journal of Magnetics
• /
• 제12권3호
• /
• pp.118-123
• /
• 2007

We have studied the effect of Au-Cu back layer system ${\sim}10{\AA}$ thick on the properties of a spin valve. The back layers were Cu, Au, co-sputtered $Cu_xAu_{1-x}$, laminated $[Au/Cu]_n$. and bi-layer [Au/Cu]. When Au was added to the Cu, the resistance of the spin valve abruptly increased most likely due to impurity scattering. The GMR values were not increased significantly for all the structures. In the case of co-sputtered $Cu_xAu_{1-x}$, the changes in the resistance, ${\Delta}R$, was increased at a composition of ${\sim}Au_{0.5}Cu_{0.5}$. This increase in ${\Delta}R$ is due to increase in the resistance and not from the enhanced spin-dependent scattering. The structural analyses showed that the orthorhombic $Au_{0.5}Cu_{0.5}$ was formed in the back layer instead of the face-centered tetragonal $Au_{0.5}Cu_{0.5}$ as we expected. Thermal annealing over $400^{\circ}C$ may be required to have face-centered tetragonal in the $10{\AA}$ thick ultra-thin film. In the case of a laminated or bi-layered back layer, the properties of the spin valve were improved, which may be attributed to the increase in the mean free path of conduction electrons.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.277-277
• /
• 2010

The capacity of the carbonaceous materials reached ca. $350\;mAhg^{-1}$ which is close to theorestical value of the carbon intercalation composition $LiC_6$, resulting in a relatively low volumetric Li capacity. Notwithstanding the capacities of carbon, it will not adjust well to the need so future devices. Silicon shows the highest gravimetric capacities (up to $4000\;mAhg^{-1}$ for $Li_{21}Si_5$). Although Si is the most promising of the next generation anodes, it undergoes a large volume change during lithium insertion and extraction. It results in pulverization of the Si and loss of electrical contact between the Si and the current collector during the lithiation and delithiation. Thus, its capacity fades rapidly during cycling. We focused on electrode materials in the multiphase form which were composed of two metal compounds to reduce the volume change in material design. A combination of electrochemically amorphous active material in an inert matrix (Si-M) has been investigated for use as negative electrode materials in lithium ion batteries. The matrix composited of Si-M alloys system that; active material (Si)-inactive material (M) with Li; M is a transition metal that does not alloy with Li with Li such as Ti, V or Mo. We fabricated and tested a broad range of Si-M compositions. The electrodes were sputter-deposited on rough Cu foil. Electrochemical, structural, and compositional characterization was performed using various techniques. The structure of Si-M alloys was investigated using X-ray Diffractometer (XRD) and transmission electron microscopy (TEM). Surface morphologies of the electrodes are observed using a field emission scanning electron microscopy (FESEM). The electrochemical properties of the electrodes are studied using the cycling test and electrochemical impedance spectroscopy (EIS). It is found that the capacity is strongly dependent on Si content and cycle retention is also changed according to M contents. It may be beneficial to find materials with high capacity, low irreversible capacity and that do not pulverize, and that combine Si-M to improve capacity retention.

• 한국환경복원기술학회지
• /
• 제24권4호
• /
• pp.61-75
• /
• 2021

Roadside greenery in the city is not only a means of reducing fine dust, but also an indispensable element of the city in various aspects such as improvement of urban thermal environment, noise reduction, ecosystem connectivity, and aesthetics. However, in studies dealing with the effect of reducing fine dust through trees in existing urban spaces, microscopic aspects such as the adsorption effect of plants were dealt with, structural changes such as the width of urban buildings and streets, and the presence or absence of trees, Impact studies that reflect the actual form of In this study, the effect of greenery composition applicable to urban space on PM2.5 was simulated through the microclimate epidemiologic model ENVI-met, and field measurements were performed in parallel to verify the results. In addition, by analyzing the results of fine dust background concentration, wind speed, and leaf area index, the sensitivity to major influencing variables was tested. As a result of the study, it was confirmed that the fine dust reduction effect was the highest in the case with a high planting amount, and the reduction effect was the greatest at a low background concentration. Based on this, the cost of planting street green areas and the effect of reducing PM2.5 were compared. The results of this study can contribute as a basis for considering the effect of pedestrian space on air quality when planning and designing street green spaces.

• 한국재료학회지
• /
• 제33권10호
• /
• pp.414-421
• /
• 2023

Infrared radiation (IR) refers to the region of the electromagnetic radiation spectrum where wavelengths range from about 700 nm to 1 mm. Any object with a temperature above absolute zero (0 K) radiates in the infrared region, and a material that transmits radiant energy in the range of 0.74 to 1.4 um is referred to as a near-infrared optical material. Germanate-based glass is attracting attention as a glass material for infrared optical lenses because of its simple manufacturing process. With the recent development of the glass molding press (GMP) process, thermal imaging cameras using oxide-based infrared lenses can be easily mass-produced, expanding their uses. To improve the mechanical and optical properties of commercial materials consisting of ternary systems, germanate-based heavy metal oxide glasses were prepared using a melt-cooling method. The fabricated samples were evaluated for thermal, structural, and optical properties using DSC, XRD, and XRF, respectively. To derive a composition with high glass stability for lens applications, ZnO and Sb₂O₃ were substituted at 0, 1, 2, 3, and 4 mol%. The glass with 1 mol% added Sb₂O₃ was confirmed to have the optimal conditions, with an optical transmittance of 80 % or more, a glass transition temperature of 660 ℃, a refractive index of 1.810, and a Vickers hardness of 558. The possibility of its application as an alternative infrared lens material to existing commercial materials capable of GMP processing was confirmed.

• 한국의류학회지
• /
• 제33권6호
• /
• pp.958-967
• /
• 2009

세계의 여러 종교들은 각기 다른 믿음체계를 바탕으로 다양한 체계를 갖추고 있으며, 종교적 의미의 표현인 종교복식 역시 종교별로 각기 다른 형식을 띠고 있다. 그러나 본 연구는 인류의 다양한 종교복식에서 나타나는 보편적 특징을 연구하는데 목적이 있다. 종교는 그 범위가 불분명하고, 연구의 한계성이 분명하므로 본 연구에서는 세계 4대 고등종교를 대상으로 연구한다. 본 연구의 목적은 첫째, 세계 고등종교에 대한 고찰, 둘째, 종교복식에 나타난 조형적 특징 연구, 셋째, 종교복식에 나타난 보편적 조형미와 미적가치에 대한 연구 및 논의 등이다. 세계 4대 고등종교의 종교복식에는 조형적 보편성이 존재한다. 첫째, 구성과 형태, 착장법 등에서의 비구조적 특징, 둘째, 인체를 감싸는 풍성한 실루엣, 셋째, 장식의 절제와 억제, 넷째, 무채색계열의 선호와 모노톤의 특징 등이다. 종교복식의 보편적 미적가치로는 종교적 절대성과 정숙성 등으로 인한 '감춤의 미', 장식이나 문양 등의 억제와 단조로운 색상 등에서 '절제의 미' 그리고 드레이퍼리와 비구조적인 특징에서는 '자연의 미'가 나타난다. 인간은 종교를 통해 본질적인 것을 추구하고 인체를 은폐함으로써 신성한 것과 접촉하려고 한다. 종교복식은 초자연적 타계와 믿음에 대한 표현이며, 의식의례 행위이다. 각 종교의 종교복식은 물론 종교의 영향을 받은 복식에도 이러한 감춤과 절제의 형식들이 고스란히 반영되어 있다.

• 한국재료학회지
• /
• 제19권4호
• /
• pp.198-202
• /
• 2009

For use in ultrasonic actuators, we investigated the structural and piezoelectric properties of $(1\;-\;x)Pb(Zr_{0.515}Ti_{0.485})O_3$ - $xPb(Sb_{1/2}Nb_{1/2})O_3$ + 0.5 wt% $MnO_2$ [(1 - x)PZT - xPSN + $MnO_2$] ceramics with a variation of x (x = 0.02, 0.04, 0.06, 0.08). All the ceramics, which were sintered at $1250^{\circ}C$ for 2 h, showed a typical perovskite structure, implying that they were well synthesized. A homogeneous micro structure was also developed for the specimens, and their average grain size was slightly decreased to $1.3{\mu}m$ by increasing x to 0.8. Moreover, a second phase with a pyrochlore structure appeared when x was above 0.06, which resulted in the deterioration of their piezoelectric properties. However, the 0.96PZT-0.04PSN+$MnO_2$ ceramics, which corresponds with a morphotropic phase boundary (MPB) composition in the (1 - x)PZT - xPSN + $MnO_2$ system, exhibited good piezoelectric properties: a piezoelectric constant ($d_{33}$) of 325 pC/N, an electromechanical coupling factor ($k_p$) of 70.8%, and a mechanical quality factor ($Q_m$) of 1779. The specimens with a relatively high curie temperature ($T_c$) of $305^{\circ}C$ also showed a significantly high dielectric constant (${\varepsilon}_r$) value of 1109. Therefore, the 0.96PZT - 0.04PSN + $MnO_2$ ceramics are suitable for use in ultrasonic vibrators.