• 한국전기전자재료학회논문지
• /
• 제19권9호
• /
• pp.832-837
• /
• 2006

Antennas were fabricated by physical(adhesive) and chemical(deposition+plating) method on organic-inorganic composite material. And antennas were measured dielectric constant and gain. Dielectric constant of antennas were fabricated by physical method was decreased with increase of adhesive tape thickness and number of conduction material composition. But antennas were fabricated by chemical method was reached to 90 % of dielectric material. Gain of antennas were fabricated by physical method was decreased with increase of adhesive tape thickness. But they were unrelated with conduction material composition. The other side antennas were fabricated by chemical method excelled more 0.8 dBic than antennas were fabricated by physical method in gain of antenna. Finally, chemical method can expect excellent product process because it can produce smaller size, higher gain and elimination of many handworks.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.107-113
• /
• 2003

This research is to investigate the performance of a flexible matrix composite driveshaft with respect to shaft design parameters such as the number of layers, ply orientations, and material properties. A finite element formulation is utilized to estimate the allowable misalignment under given driving torque, the maximum temperature at steady states, and external damping for ensuring whirling stability under supercritical speed. Results indicate that the system performance can be greatly affected by the shaft laminate parameters, especially the ply orientations. Several sets of shaft parameters that will provide satisfactory overall system performance are derived.

• 한국CDE학회논문집
• /
• 제3권4호
• /
• pp.274-282
• /
• 1998

A feature is a local shape of a product directly related to the manufacturing process. The feature plays a role of the bridge connecting CAD and CAM. In the process planning for he CAM, information on manufacturing is required. To get the a manufacturing information from CAD dat, we need to recognize features. Once features are recognized, they are used as an input for the process planning. In this paper, we thoroughly investigate the composite features, which are generated by interacting simple features. The simple features in the composite feature usually have precedence relation in terms of process sequence. Based on the reason for the precedence relation, we classify the composite features for the process planning. In addition to the precedence relation, approach direction is used as an input for the process planning. In the process planning, the number of set-up orientations are minimized whole process sequence for the features are generated. We propose a process planning algorithm based on the topological sort and breadth-first search of graphs. The algorithn is verified using sample products.

• Advances in Computational Design
• /
• 제3권2호
• /
• pp.113-132
• /
• 2018

This paper presents the vibration and harmonic analysis of orthotropic laminated composite plate. The response of plate is determined using Finite Element Method. The eight noded shell 281 elements are used to analyze the orthotropic plates and results are obtained so that the right choice can be made in applications such as aircrafts, rockets, missiles, etc. to reduce the vibration amplitudes. Initially the model response for orthotropic plate and harmonic response for isotropic plate is verified with the available literature. The results are in good agreement with the available literature. Numerical results for the natural frequency and harmonic response amplitude are presented. Effects of boundary conditions, thickness to width ratio and number of layers on natural frequency and harmonic response of the orthographic plates are also investigated. The natural frequency, mode shape and harmonic analysis of laminated composite plate has been determined using finite element package ANSYS.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.293-296
• /
• 2006

The results and interpretations of push-out tests on shear connector devices for composite bridges carried out in this study are presented. The devices under investigations are headed studes, perfobond rib, ㄱtype perfobond rib, T- Connector and a new type of shear connector called T type perfobond rib. This new connector is flat steel plate with a number of holes punched through. The results obtained indicate that the T type perfobond rib shear connectors exhibit adequate ductility and substantially higher capacities. Therefore for composite beams utilizing reinforced concrete slabs, the T type perfobond rib shear connectors is a viable alternative to the headed studs.

• Restorative Dentistry and Endodontics
• /
• 제7권1호
• /
• pp.71-75
• /
• 1981

Five different labelled composite resin, Hypol (Korea), Glass-Ionomer (Japan), Simulate (U.S.A.), Durafil (U.S.A.) and Microfil (U.S.A.) were collected to employ for this experimental study. The purpose of the study is to determine the effect of finger pressure technic and traditional filling by means of plastic instruments on porosity formation in composite materials. Each material with pressure and non-pressure cases were carefully examined under electron microscope. Following were the results obtained through the study. 1. Pressured cases showed smaller number of porosity and the size of porosity was significantly smaller than non-pressured cases in each mateial. 2. Glass-Ionomer with pressure cases were seen as tube-like appearance because of pressured small porosities communicate in a certain direction. 3. Durafil cases both pressured and non pressured, appeared the least porosity formation. among the materiats. 4. Border line between the outmost periphery of the porosity and matrix of the resin in both pressured or non-pressured eases were found characteristically clear in Mierofil cases.

• 한국전기전자재료학회논문지
• /
• 제23권1호
• /
• pp.65-69
• /
• 2010

In this study, we compared two methods(an acid treatment in strong acid reflux and a heat treatment in air atmosphere) for hydrophilic surface treatment of multi-walled carbon nanotubes(MWNT) to enhance the capcity of $RuO_2$/MWNT composite electrode materials for ultracapacitor. Both treatments generated a number of defects on the surface of MWNT by the breakage of $\pi$ bond in graphene layer at which carboxyl groups were introduced. However, the degree of hydrophilicity generated by strong acid treatment was higher than that by heat treatment in air, which was revealed by the quantitative measurement of surface carboxyl groups by using Boehm titration. The increased hydrophilicity save rise to an improved dispersity of $RuO_2$ nanoparticles on MWNT. Finally, the improved dispersity resulted in the capacity enhancement of composite electrode materials for ultracapacitor.

• 한국재료학회지
• /
• 제28권12호
• /
• pp.691-695
• /
• 2018

In this study, we investigate the recycling of aluminum-based metal matrix composites(AMCs) embedded with SiC particulates. The microstructure of the AMCs is characterized by X-ray diffraction and scanning electron microscopy. The possibility of recycling the composite scrap is attempted from the melted alloy and SiC particulates by re-melting, holding and solidification in crucibles. The recovery percentage of the matrix alloy is calculated after a number of holding times, 0, 5, 10, 15, 20, 25 and 30 minutes and for different particulate sizes and weight fractions in the Al matrix. The results show that the recovery percentage of the matrix alloy, as well as the time required for maximum recovery of the matrix, is dependent on the size and weight fraction of SiC particulates. In addition, the percentage recovery increases with particulate size but drops with the particulate fraction in the matrix. The time to reach maximum recovery falls rapidly with an increase in particulate size and fraction.

• Journal of applied mathematics & informatics
• /
• 제40권1_2호
• /
• pp.99-115
• /
• 2022

The problem of Benard double diffusive Marangoni convection is investigated in a horizontally infinite composite layer system consisting of a two component fluid layer above a porous layer saturated with the same fluid, using Darcy-Brinkman model with constant heat sources/sink in both the layers. The lower boundary of the porous region is rigid and upper boundary of the fluid region is free with Marangoni effects. The system of ordinary differential equations obtained after normal mode analysis is solved in closed form for the eigenvalue, thermal Marangoni number for two types of thermal boundary combinations, Type (I) Adiabatic-Adiabatic and Type (II) Adiabatic -Isothermal. The corresponding two thermal Marangoni numbers are obtained and the essence of the different parameters on non-Darcy-Benard double diffusive Marangoni convection are investigated in detail.

• Earthquakes and Structures
• /
• 제25권6호
• /
• pp.429-442
• /
• 2023

To study the seismic vulnerability of the composite material structure of adobe and timber, we collected and statistically analysed empirical observation samples of 542,214,937 m² and 467,177 buildings that were significantly impacted during the 179 earthquakes that occurred in mainland China from 1976 to 2010. In multi-intensity regions, combined with numerical analysis and a probability model, a non-linear continuous regression model of the vulnerability, considering the empirical seismic damage area (number of buildings) and the ratio of seismic damage, was established. Moreover, a probability matrix model of the empirical seismic damage mean value was provided. Considering the coupling effect of the annual and seismic fortification factors, an empirical seismic vulnerability curve model was constructed in the multiple-intensity regions. A probability matrix model of the mean vulnerability index (MVI) was proposed, and was validated through the above-mentioned reconnaissance sample data. A matrix model of the MVI of the regions (19 provinces in mainland China) based on the parameter (MVI) was established.