• Wind and Structures
• /
• 제25권2호
• /
• pp.131-156
• /
• 2017

This paper deals with the dynamic stability of embedded functionally graded (FG)-carbon nanotubes (CNTs)-reinforced micro cylindrical shells. The structure is subjected to harmonic non-uniform temperature distribution and 2D magnetic field. The CNT reinforcement is either uniformly distributed or FG along the thickness direction where the effective properties of nano-composite structure are estimated through Mixture low. The viscoelastic properties of structure are captured based on the Kelvin-Voigt theory. The surrounding viscoelastic medium is considered nonhomogeneous with the spring, orthotropic shear and damper constants. The material properties of cylindrical shell and the viscoelastic medium constants are assumed temperature-dependent. The first order shear deformation theory (FSDT) or Mindlin theory in conjunction with Hamilton's principle is utilized for deriving the motion equations where the size effects are considered based on Eringen's nonlocal theory. Based on differential quadrature (DQ) and Bolotin methods, the dynamic instability region (DIR) of structure is obtained for different boundary conditions. The effects of different parameters such as volume percent and distribution type of CNTs, mode number, viscoelastic medium type, temperature, boundary conditions, magnetic field, nonlocal parameter and structural damping constant are shown on the DIR of system. Numerical results indicate that the FGX distribution of CNTs is better than other considered cases. In addition, considering structural damping of system reduces the resonance frequency.

• Steel and Composite Structures
• /
• 제28권3호
• /
• pp.289-308
• /
• 2018

Numerous urban seismic vulnerability studies have recognized pounding as one of the main risks due to the restricted separation distance between neighboring structures. The pounding effects on the adjacent buildings could extend from slight non-structural to serious structural damage that could even head to a total collapse of buildings. Therefore, an assessment of the seismic pounding hazard to the adjacent buildings is superficial in future building code calibrations. Thus, this study targets are to draw useful recommendations and set up guidelines for potential pounding damage evaluation for code calibration through a numerical simulation approach for the evaluation of the pounding risks on adjacent buildings. A numerical simulation is formulated to estimate the seismic pounding effects on the seismic response demands of adjacent buildings for different design parameters that include: number of stories, separation distances; alignment configurations, and then compared with nominal model without pounding. Based on the obtained results, it has been concluded that the severity of the pounding effects depends on the dynamic characteristics of the adjacent buildings and the input excitation characteristics, and whether the building is exposed to one or two-sided impacts. Seismic pounding among adjacent buildings produces greater acceleration and shear force response demands at different story levels compared to the no pounding case response demands.

• Steel and Composite Structures
• /
• 제35권3호
• /
• pp.415-437
• /
• 2020

Circular concrete filled steel tube (CFST) columns have an advantage over all other sections when they are used in compression members. This paper proposes a new approach for deriving a new empirical equation to predict the axial compressive capacity of circular CFST columns using the Artificial Neural Network (ANN). The developed ANN model uses 5 input parameters that include the diameter of circular steel tube, the length of the column, the thickness of steel tube, the steel yield strength and the compressive strength of concrete. The only output parameter is the axial compressive capacity. Training and testing the developed ANN model was carried out using 219 available sets of data collected from the experimental results in the literature. An empirical equation is then proposed as an important result of this study, which is practically used to predict the axial compressive capacity of a circular CFST column. To evaluate the performance of the developed ANN model and the proposed equation, the predicted results are compared with those of the empirical equations stated in the current design codes and other models. It is shown that the proposed equation can predict the axial compressive capacity of circular CFST columns more accurately than other methods. This is confirmed by the high accuracy of a large number of existing test results. Finally, the parametric study result is analyzed for the proposed ANN equation to consider the effect of the input parameters on axial compressive strength.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.289-292
• /
• 2012

현재 대한민국에는 동록 되지 않은 시각장애인을 포함하여 20~30만 명의 시각장애인이 있다. 시각 장애인들은 보행을 할 때 주로 흰 지팡이(White Stick)를 사용하고 있다. 안내견의 도움을 받는 시각 장애인도 있지만 비용문제 등 여러 복합적인 문제로 인해 소수의 시각장애인만이 이용하고 있다. 현재 상용되어지고 있는 시각장애인을 위한 길 안내 서비스 보조기구는 시각장애인들이 사용하고 있는 흰 지팡이에 RFID태그를 부착하고, 이를 이용하여 표지블록과 RF통신을 하는 정도의 수준에 머무르고 있다. 이는 인식거리가 짧고, 명확한 장애물의 위치, 크기 및 형태를 판단하기 힘들기 때문에 실제 시각장애인들의 보행에 큰 도움이 되지 못하고 있는 실정이다. 이에 본 논문에서는 시각장애인들이 좀 더 수월하게 보행 할 수 있도록 Cortex-A8 Platform기반의 'Smart Portable Navigation System'개발에 대한 연구를 다루고자 한다.

• Progress in Superconductivity
• /
• 제10권1호
• /
• pp.55-59
• /
• 2008

A Superconductor Flywheel Energy Storage System(SFES) mainly consists of a pair of non-contacting High Temperature Superconductor(HTS) bearings that provide very low frictional losses, a composite flywheel with high energy storage density. The HTS bearings, which offer dynamic stability without active control, are the key technology that distinguishes the SFES from other flywheel energy storage devices, and great effort is being put into developing this technology. The Superconductor Journal Bearing(SJB) mainly consists of HTS bulks and a stator, which holds the HTS bulks and also acts as a cold head. Static properties of HTS bearings provide data to solve problems which may occur easily in a running system. Since stiffness to counter vibration is the main parameter in designing an HTS bearing system, we investigate SJB magnetic force through static properties between the Permanent Magnet(PM) and HTS. We measure stiffness in static condition and the results are used to determine the optimal number of HTS bulks for a 100kWh SFES.

• Journal of Preventive Medicine and Public Health
• /
• 제35권1호
• /
• pp.41-48
• /
• 2002

Objectives : To review the drug prescription pattern of antiulcerative agents for elderly inpatients, Methods : The study population comprised inpatients of community hospitals who were members of the Korean Elderly Pharmacoepidemiologic Cohort (KEPEC), aged 65 years or over, beneficiaries of the Korea Medical Insurance Corporation (KMIC) and residing in Busan city in 1993. The drug prescription information was collected from the claims data of hospitals where the cohort members received medical care between January 1993 and December 1594. The information included personal identification, age, gender, diagnosis, drug dosage, date of hospital admission and name of medical institutions where the study subjects received drug prescriptions. The data analysis produced outcomes in terms of distribution of antiulcerative agents by class and by medical institution and trend of relative prescription, Analysis was also performed in terms of combined prescriptions of antiulceratives and drugs that could induce risk from drug interaction with antiulceratives. Results : The number of patients prescribed antiulcerative agents was 1,059 (64,9%) male and 1,724 (65.5%) female among the total inpatients. An antacid and composite agent was the most frequently prescribed antiulcerative agent (70.8%), followed by $H_2$ antagonist (16.0%), Among the potential drugs that could induce risk from drug interaction with the antiulcerative agents, diazepam was the most frequently prescribed. The proportion of diazepam co-prescription was 22.5% of the total cimetidine prescriptions and 14.5% of the fetal omeprazole prescriptions. Conclusions : Antiulcerative drugs were frequently prescribed in the elderly inpatients. The adverse drug reaction could possibly be due to drug interaction. The study results could be used as fundamental data for further drug utilization review of antiulceratiye agents.

• The Journal of Korean Physical Therapy
• /
• 제32권4호
• /
• pp.203-209
• /
• 2020

Purpose: This study examined the effects of a physical stability exercise program on the functional movement and balance of middle school volleyball players to provide future management and training data to improve the performance of volleyball players. Methods: The subjects were 20 volleyball players from Y Middle School in Mokpo. The results of comparing and analyzing the effects of the physical stability exercise program on the functional movement and balance of middle school volleyball players for 10 weeks are as follows. Results: The number of participants who showed power and agility (p<0.01) was increased significantly, and the response time was shortened significantly (p<0.01). On the evaluation of functional movement, the total score showed a significant difference between the pre-test at 10.90±1.30 points and the post-test at 13.81±.60 (p<0.001). The subjects' balance showed a significant difference from 84.11±7.53 to 97.65±8.47 (p<0.001), and the Right Composite Score showed a significant difference from 83.74±6.64 to 97.27±8.48 (p<0.001). Conclusion: The application of a physical stability exercise program for 10 weeks is effective in improving the speed, agility, functional movement, and balance to volleyball players who are weakened and at risk of injury. This is believed to prevent or reduce injury.

• 한국농공학회지
• /
• 제34권1호
• /
• pp.78-86
• /
• 1992

This paper aims at investigating the effect of steel ratio and the magnitude of edge-ratio on the mechanical characteristics of reinforced concrete ring sector plate. The influence of steel bars was taken into account by coupling stiffness matrix of the steel bar element with that of the concrete plate element without dealing with separate element of steel bar and by establishing the composite stiffness matrix, which leads to the desirable result which does not increase th number of element could be obtained. Through case studies with 6 cases various steel ratios in ring sector plate supported at four edges and 4 cases with different open angles, the influence of the steel ratio was examined. A numerical analysis to find out the effect of the steel ratio d ue to above mentioned cases was carried out by 4 boundary conditions ; all edges clamped (B.C-1), all edges simply supported (B.C-2), curvilinear two edges clamped and other edges free (B.C-3) and curvilinear two edges simply supported and other edges free(B.C-4). The main results obtained are summarized as follows : 1. The effect of steel ratio on the magnitude of lateral deflection and x-directional bending moment at the center of sector plate and the midpoint of outer and inner curvilinear edges is almost the same up to $30^{\circ}$ of open angle. Beyond $30^{\circ}$ of the angle, the larger the angle, the greater the effect of ratio. 2. In design works using balanced steel ratio, the effect of steel bar can be ignored. But for larger open angles, especially greater than $90^{\circ}$, it proves desirable to consider the effect of steel bar. 3. The effect of the arc length of center circle/straight edge on lateral deflection and bending moment is remarkable in B.C-2. For larger open angle, the effect is also noted except for B.C-3 which turn out hardly affected. 4. The effect of the radius of curvature/straight side length on lateral deflection and x-directional bending moment is noted in B.C-2. As open angle increases, B.C-1 and B.C-3 almost agree and B.C-2 approaches B.C-4.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권5호
• /
• pp.1567-1587
• /
• 2014

Virtual Machine (VM) resource management is crucial to satisfy the Quality of Service (QoS) demands of various multimedia services in a media cloud platform. To this end, this paper presents a VM resource allocation model that dynamically and optimally utilizes VM resources to satisfy QoS requirements of media-rich cloud services or applications. It additionally maintains high system utilization by avoiding the over-provisioning of VM resources to services or applications. The objective is to 1) minimize the number of physical machines for cost reduction and energy saving; 2) control the processing delay of media services to improve response time; and 3) achieve load balancing or overall utilization of physical resources. The proposed VM allocation is mapped into the multidimensional bin-packing problem, which is NP-complete. To solve this problem, we have designed a Mixed Integer Linear Programming (MILP) model, as well as heuristics for quantitatively optimizing the VM allocation. The simulation results show that our scheme outperforms the existing VM allocation schemes in a media cloud environment, in terms of cost reduction, response time reduction and QoS guarantee.

• 품질경영학회지
• /
• 제48권1호
• /
• pp.51-68
• /
• 2020

Purpose: The primary objective of this research is to develop the optimal operating conditions as well as their associated design spaces for a Cryogenic Submerged Arc Welding(SAW) process by improving its quality and productivity simultaneously. Methods: In order to investigate functional relationships among quality characteristics and their associated control factors of an SAW process, a stepwise design of experiment(DoE) method is proposed in this paper. Based on the DoE results, not only a multi-dimensional design space but also a safe operating space and normal acceptable range(NAR) by integrating statistical confidence intervals were demonstrated. In addition, the optimal operating conditions within the proposed NAR can be obtained by a robust optimal design method. Results: This study provides a customized stepwise DoE method (i.e., a sequential set of DoE such as a factorial design and a central composite design) for Cryogenic SAW process and its statistical analysis results. DoE results can then provide both the main and interaction effects of input control factors and the functional relationships between the input factors and their associated output responses. Maximizing both the product quality with high impact strength and the productivity with minimum processing times simultaneously in a case study, we proposed a design space which can provide both acceptable productivity and quality levels and NARs of input control factors. In order to confirm the optimal factor settings and the proposed NARs, validation experiments were performed. Conclusion: This research may provide significant contributions and applications to many SAW problems by preparing a standardization of the functional relationship between the input factors and their associated output response. Moreover, the proposed design space based on DoE and NAR methods can simultaneously consider a number of quality characteristics including tradeoff between productivity and quality levels.