• 천문학논총
• /
• 제16권1호
• /
• pp.25-29
• /
• 2001

We obtained three-color composite. images of 78 celestial objects most of which are listed in Messier catalogue. In order to make color images, 118 raw image sets were taken with B, V, R, I and H-alpha filters. We used the 2k CCD camera attached to the 1.8 m telescope of Bohyunsan Optical Astronomy Observatory. These composite images are to be used for educational purposes or public releases. The images are presented on the website, http://www.boao.re.kr/-ybjeon/boao_images.htrnl.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.927-929
• /
• 2003

Using received northeast region in China of Terra/MODIS data at Tokyo University of information Sciences. Make monthly division Land Surface Temperature maximum composite image. Using monthly division Land Surface Temperature maximum composite image, considered characteristic of monthly variation of Land surface temperature and relation with land covering and NDVI at the northeast region in China.

• 한국항공우주학회지
• /
• 제42권10호
• /
• pp.809-815
• /
• 2014

큰 온도 변화를 받는 이종 접합 복합재는 재료의 서로 다른 열팽창 특성으로 인해 열에 의한 형상 왜곡이 발생되기 쉽다. 성형 과정에서 이종 접합 복합재 구조물의 제작 공정 중의 형상 왜곡 현상을 고려하기 위해서 구성하는 각각의 복합재료들에 대한 열팽창 특성 분석이 우선적으로 요구된다. 본 논문에서는 Carbon/Epoxy와 Silica/Phenolic의 이종접합 복합재료 시편의 열변형 특성을 측정하기 위해 디지털 영상 상관 기법(DIC)을 활용하였다. 이종 접합 복합재 시편의 열변형에 대해 수치 해석을 수행하였고 이를 실험 결과와 비교하였다. 수치해석을 통한 예측 결과는 실험을 통하여 입증되었다.

• 한국세라믹학회지
• /
• 제56권5호
• /
• pp.443-452
• /
• 2019

In this study, TiO₂-polyvinyl alcohol (PVA) composite granules were prepared via spray drying technique. To investigate the effects of solid content and binder/powder ratio in the slurry on the granulation behavior of TiO₂ powders, the feed compositions were designed to vary over a wide range. The morphology, actual densities, and average granule size and size distribution of the TiO₂-PVA composite granules were characterized by using scanning electron microscopy technique, a gas pycnometer, and an image analyzing program (Image-J), respectively. The results indicate that solid content and the amount of PVA in the feedstock slurry are the dominant factors determining the granule morphology, size, and size distribution of TiO₂-PVA composite. Moreover, it was observed that increasing the solid content and the amount of PVA in the slurry improved the granulation process and reduced the granule defects. For the preparation of spherical TiO₂-PVA composite granules with the minimum amount of non-granulated powders, the optimized composition of the feedstock slurry was found to be 35 wt.% solid and 3 wt.% PVA.

• 비파괴검사학회지
• /
• 제33권1호
• /
• pp.40-45
• /
• 2013

위상잠금 적외선열화상기법을 이용하여 치과용 복합레진 수복재의 내부 홀 결함 크기에 따른 검출 가능성을 연구하였다 위상잠금 주파수 조건을 다르게 하며 진폭과 위상영상을 분석하였다. 진폭 이미지 분석을 통해 직경 2 mm 이상의 결함 검출이 가능함을 알았으며 0.05 Hz 부근에서 결함부의 구별이 뚜렷하고 선명한 이미지를 획득할 수 있었다. 진폭 대비차는 결함부의 직경 크기에 비례하였다. 위상 이미지 분석 결과 0.3-0.5 Hz 부근에서 최적의 대조 영상을 보였으며 0.006 Hz 에서는 반대 명암의 뚜렷한 이미지를 얻을 수 있었다. 진폭 분석보다 위상 분석에서 결함부 크기가 작은 시편의 검출 가능성이 더 높았다.

• 대한기계학회논문집A
• /
• 제40권12호
• /
• pp.1021-1026
• /
• 2016

본 연구는 점탄성을 가진 HTPB 입자강화 복합재료의 균열저항에 대하여 쐐기분열시험 및 균열선단열림각도를 이용하여 평가하였다. 일반적으로 균열진전 함수로서 균열선단열림각도는 파괴저항을 결정하기 위해 사용되며, 수치적으로 일정한 값을 가진다. 디지털 화상관련법은 임계 균열선단열림각도를 도출하기 위하여 균열선단열림변위 및 균열진전길이를 측정하기 위해 사용되었다. 본 연구의 시험 결과에서 입자강화 복합재료의 임계 균열선단열림각도는 균열초기 진전 후 일정한 값을 가진다. 임계 균열선단열림각도는 $50^{\circ}C$에서 $-40^{\circ}C$로 온도의 감소에 따라 증가한다. 이러한 임계 균열선단열림각도는 입자강화 복합재료의 파괴역학 파라미터로 사용될 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.659-663
• /
• 1995

The fiber oriented conditied inside fiber reinforced composite material is a basic factor of mechanical properties of composite materials. It is very important to measure the fiber orientation angel for the determination of molding conditions, mechanical charactistics, and the design of composite materials. In the work, the fiber orientation distribution of simulation figure plotted by PC is measured using image processing in order to examine thr accuracy of intersection counting method. The fiber orientation function measured by intersection countingmethod using image processing is compared with the calculated fiber orientation function. The results show that the measured value of fiber orientation function using intersection counting method is lower than the calculated value, because the number of intersection between the secant line and the fiber with smaller fiber aspect ratio is counted less than with larger fiber aspect ratio.

• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.479-490
• /
• 2000

The microstructure of Ni-YSZ composite as an anode of SOFC was investigated as a function of Ni content(10-70 vol%) in order to examine the correlation between microstructural-and electrical property. Image analysis based on quantitative microscopy theory was performed to quantify the microstructural property. We could get the informations about the size and distribution, contiguity and interfacial area of each phase or between the phases from the image analysis. According to the image analysis, contiguity between the same phae was mainly dependent on the amount of the phase while the contiguity between different phases was additionally influenced by the microstructural changes, especailly by the coarsening of the Ni phase. The whole length of pores perimeter was increased as Ni content increased, which indicated the overall microstructural evolution was mostly related with the coarsening of Ni phase. Ni-Ni interfacial area was also gradually increased as Ni content increased but controlled by pore phase at low Ni content region and by YSZ phase at intermediate Ni content region. These quantified microstructural properties were used to characterize the electrical properties of Ni-YSZ composite.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.225-228
• /
• 2005

According to a popularization of the Internet and digital lifestyle, digital watermarks have been proposed for protection of copyrighted multimedia content. In blind watermark detection, which an original image is not provided, robustness against geometric distortion and compression remains challenging. In this paper, we propose a new perceptual blind discrete wavelet transform - discrete Fourier transform (DWT-DFT) composite watermarking scheme that is robust against both general linear transform and JPEG compression. This algorithm constructs an image-dependent watermark in the most significant DWT coefficients, which is determined by using a hierarchical tree structure. Strength of watermark is determined from a just-noticeable difference (JND) profile of a perceptual model. Furthermore, a desired template is inserted into DFT domain of the watermarked image. In new manner, a cross-ratio of four collinear points is used for detecting the template. Experimental results have showed that the proposed scheme is robust against general linear distortion, JPEG compression and various general kinds of attacks in the Stirmark 3.1 watermark evaluation tool.

• 비파괴검사학회지
• /
• 제35권6호
• /
• pp.398-406
• /
• 2015

This paper explored the results of experimental investigation on carbon fiber reinforced polymer (CFRP) composite sample with thermal wave technique. The thermal wave technique combines the advantages of both conventional thermal wave measurement and thermography using a commercial Infrared camera. The sample comprises the artificial inclusions of foreign material to simulate defects of different shape and size at different depths. Lock-in thermography is employed for the detection of defects. The temperature field of the front surface of sample was observed and analysed at several excitation frequencies ranging from 0.562 Hz down to 0.032 Hz. Four-point methodology was applied to extract the amplitude and phase of thermal wave's harmonic component. The phase images are analyzed to find qualitative and quantitative information about the defects.