• Journal of Animal Science and Technology
• /
• v.48 no.6
• /
• pp.767-776
• /
• 2006

Corresponding author:Deukhwan Lee, Department of Animal Life Resources, Hankyong National Univ. Seokjeong-dong Anseong-si Gyeonggi-do, Rep. of Korea 456-749Tel: 031-670-5091, Fax: 031-676-5091, E-mail : dhlee@hknu.ac.krGeneral performance with including environmental and management effects on linear type traits in Holstein cows were investigated. 115,646 valid records measured from cows over 1 yrs of age by Korean Animal Improvement Association from 2000 to 2004 were used for this study. Farm, appraisal year-month, appraisal person should affect linear type and scoring traits. Most of type traits and scoring traits would be significantly affected by parity and lactation stage after absorbing farm-appraisal year-month-person effects. Otherwise, some traits such as traits related to udder would be affected by registration criteria. However, interval of appraisal time and milking time would not affect these traits. The scores related to udder, teat placement and foot angle would be positively related to parity. Final score would be optimized at cows of 2nd and 3rd parities. Dairy form, front teat placement, rear udder height, rear udder width and final score would show similar to pattern of lactation curve at lactation stage. Dairy capacity composite index would also show similar to lactation curve. This result would be indicated that more concise standardizing system for linear type scoring rules would be needed. Furthermore, correcting system for parity and lactation stage would be needed because this factor should affect physiological status, specially, udder status.

• Steel and Composite Structures
• /
• v.35 no.6
• /
• pp.799-813
• /
• 2020

Fatigue cracks of rib-to-deck (RD) joints have been frequently observed in the orthotropic steel decks (OSD) using conventional U-ribs (CU). Thickened edge U-rib (TEU) is proposed to enhance the fatigue strength of RD joints, and its effectiveness has been proved through fatigue tests. In-depth full-scale tests are further carried out to investigate both the fatigue strength and fractography of RD joints. Based on the test result, the mean fatigue strength of TEU specimens is 21% and 17% higher than that of CU specimens in terms of nominal and hot spot stress, respectively. Meanwhile, the development of fatigue cracks has been measured using the strain gauges installed along the welded joint. It is found that such the crack remains almost in semi-elliptical shape during the initiation and propagation. For the further application of TEUs, the design curve under the specific survival rate is required for the RD joints using TEUs. Since the fatigue strength of welded joints is highly scattered, the design curves derived by using the limited test data only are not reliable enough to be used as the reference. On this ground, an experiment-numerical hybrid approach is employed. Basing on the fatigue test, a probabilistic assessment model has been established to predict the fatigue strength of RD joints. In the model, the randomness in material properties, initial flaws and local geometries has been taken into consideration. The multiple-site initiation and coalescence of fatigue cracks are also considered to improve the accuracy. Validation of the model has been rigorously conducted using the test data. By extending the validated model, large-scale databases of fatigue life could be generated in a short period. Through the regression analysis on the generated database, design curves of the RD joint have been derived under the 95% survival rate. As the result, FAT 85 and FAT 110 curves with the power index m of 2.89 are recommended in the fatigue evaluation on the RD joint using TEUs in terms of nominal stress and hot spot stress respectively. Meanwhile, FAT 70 and FAT 90 curves with m of 2.92 are suggested in the evaluation on the RD joint using CUs in terms of nominal stress and hot spot stress, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.231-237
• /
• 2017

This study examines the relationship between voluntary information disclosure and the effective tax rate using Investor Relation (IR) as the proxy for the level of the firm's voluntary information disclosure, and effective corporate tax rate as the proxy for the level of tax avoidance. This study considers sample data from 1,396 firms listed on the Korea Composite Stock Price Index (KOSPI) from 2011-2014. The results of this study are as follows: Investor Relation (IR) had a positive correlation with effective corporate tax rate. This result got on with the result of additional analysis using extra measurement of effective corporate tax rate. According to these results, we expect that firms featuring greater voluntary information disclosure report enhanced business performance. This study contributes understanding how Investor Relation (IR) affects tax avoidance. We hope that this study can promote the development of capital markets and provide good news to investors for firms that have greater information disclosure.

• Journal of the Economic Geographical Society of Korea
• /
• v.15 no.4
• /
• pp.585-600
• /
• 2012

The purpose of this study related to the liquidity impact of the housing market variables using vector auto-regressive model(VAR) and empirical analysis is to derive some policy implications. October 2003 until May 2012 using monthly data for liquidity variables mortgage rates, mortgage, financial liquidity, as the composite index and nation, Seoul, Gangnam, Gangbuk, the Apartment sales prices were analyzed. Granger Causality Test Results, mortgage rates and mortgage at a bargain price two regions had a strong causal relationship. Since the impulse response analysis, Geothermal difference there, but housing price housing price itself, the most significant ongoing positive (+) reactions were liquidity-related variables are mortgage loans is large and persistent positive (+), financial liquidity weakly positive (+), mortgage interest rates are negative (-), KOSPI, the negative (-) reacted. Liquidity and housing prices that the rise can be and Gangnam in Gangbuk is greater than the factor that housing investment was confirmed empirically. Government to consider the current economic situation, while maintaining low interest rates and liquidity of the market rather than the real estate industry must ensure that activities can be embedded and local enforcement policies should be differentiated according to the policy will be able to reap significant effect.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.12
• /
• pp.1677-1685
• /
• 2012

The autolysate and hydrolysate of a common squid liver, Todarodes pacificus, were prepared. Autolysis (liver ratio, pH, temperature) and Protamex-treated hydrolysis (pH, temperature, ratio of protease to liver) conditions were optimized by response surface methodology using central composite design for under 1 hr of hydrolysis time. The desirability profile indicated that maximum DH could be achieved at a squid liver of 93.5%, pH 6.4, and $47^{\circ}C$ in autolysis, while that of Protamex-treated hydrolysis did at a Protamex-to-squid liver level of 0.33%, pH 6.0, and $55^{\circ}C$. Three amino acids, proline, cysteine, and methionine, were not detected in the total amino acid composition of the Protamex-treated hydrolysate, while they were detected in the free amino acid composition. Cadmium was $8.32{\pm}0.03$ mg/100 g-powder for raw, $3.56{\pm}0.02$ mg/100 g-powder for the autolysate, and $13.26{\pm}0.04$ mg/100 g powder for the Protamex-treated hydrolysate. The major molecular weight ranged from 1.0 to 1.5 kDa for the autolysate and from 210 to 470 Da for the Protamex-treated hydrolysate. Food functionalities of the autolysate, such as surface hydrolphobicity, emulsion activity index, emulsion stability, water, and fat adsorption, were similar to the Protamex-treated hydrolysate. Both the autolysate and Protamex-hydrolysate showed high inhibitory activities on the angiotensin-I converting enzyme. Cell toxicity against the HepG2 cell line was not detected in the autolysate or the Protamex-treated hydrolysate by 200 ${\mu}g/mL$.

• Korean journal of communication and information
• /
• v.26
• /
• pp.45-82
• /
• 2004

The purpose of this study is to examine the concept of civic journalism and the contents of Korean Internet newspapers that might reflect the possibilities of this new medium for civic journalism practices. This study examined how far and deep civic journalism practices have extended into Korean Internet newspapers as journalism's new tradition. More specifically, this study analyzed news articles of Korean Internet newspapers to uncover any differences among civic journalism Internet newspapers with different citizen reporter systems. The composite measure based upon ten elements of civic journalism practices was used as indicator of civic journalism practices. To obtain systematic data on news offered by Korean Internet newspapers on the World Wide Web, four major Internet newspapers, including Ohmynews, Ngotimes, Netpinion and Pressian were examined by a content analysis in April and May of 2003. Findings of this study reveal that many Korean newspapers do not fully exploit the opportunities and advantages offered by the new medium for civic journalism practices in online environments. Both aggregate and individual level of analysis for the civic journalism index reveal that there are some differences between non-civic journalism and civic journalism Internet newspapers using citizen reporter systems. However, overall performances of civic journalism Internet newspapers are not good enough to support the argument that civic journalism is well practiced in Korean Internet newspapers. Nonetheless, it would not be fair to conclude that Korean Internet newspapers have totally ignored the Internet's potential to increase the civic journalism performance in online environments.

• Journal of the Korea Concrete Institute
• /
• v.19 no.4
• /
• pp.467-474
• /
• 2007

In this paper, a total of 13 beams with bonding, anchorage system, amount of prestressing and span length as variables of experiment were tested in flexural test and analyzed in finite element analysis; one control beam, two simplified FRP-boned beams, four prestressed FRP-unbonded beams and four prestressed FRP-bonded beams. Also, a nonlinear finite element analysis of beams in the flexural test is performed by DIANA program considered material nonlinear of concrete, reinforcement and the interfacial bond-slip model between concrete and CFRP plates. The failure mode of prestressed CFRP plated-beams is not debonding but FRP rupture. RC members strengthened with external bonded prestressed CFRP plates occurred 1st and 2nd debonding of the composite material. After the debonding of CFRP plates occurs in bonded system, behavior of bonded CFRP-plated beams change into that of unbonded CFRP-plated beams due to fix of the anchorage system. Also, It was compared flexural test results and analytical results of RC members strengthened with CFRF plates. The ductility of beams strengthened by CFRP plates with the anchorage system is considered high with the ductility index of above 3. Analysis results showed a good agreement with experiment results in the debonding load, yield load and ultimate load.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.2
• /
• pp.229-236
• /
• 2017

This study was performed to optimize yanggaeng processing conditions prepared with different amounts of steamed Liriopis tuber (SLT) extract, sugar, and agar powder using response surface methodology. The experimental conditions were designed according to the central composite design with 16 experimental points, including two replicates for three independent variables. The experimental data on physicochemical properties, textural properties, and sensory evaluation were fitted to various models, and the accuracy of the equations was analyzed by ANOVA. Among the responses, pH, water content, sugar content, L-value, browning index, chewiness, gumminess, and sensory properties of appearance, color, sweetness, hardness, texture, and overall acceptability showed significant correlation with contents of SLT, sugar, and agar powder. From these results, optimum formulation of yanggaeng was calculated as follows: SLT 35 mL, sugar 55.23 g, and agar powder 3.39 g.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.1
• /
• pp.43-53
• /
• 1985

This study proposes a reliability based design criteria for the steel bridge (H-beam, plate-girder and composite-beam), which is most common type of steel bridge, and also proposes the theoretical bases of nominal safety factors as well as load and rasistance factors based on the reliability theory. Major 2nd moment reliability analysis and design theories including both Cornell's MFOSM (Mean First Order 2nd Moment) Methods and Lind-Hasofer's AFOSM(Advanced First Order 2nd Moment) Methods are summarized and compared, and it has been found that Lind-Hasofer's approximate and an approximate Log-normal type reliability formula are well suited for the proposed reliability study. A target reliability index (${\beta}_0=3.5$) is selected as an optimal value considering our practice based on the calibration with the safety pravisions of the current steel bridge design code. Galambo's theory is used for the derivation of the algorithm for the evaluation of uncertainties associated with resistences by LRFD Format and SGST Format, whereas the magnitude of the uncertainties associated with load effects are chosen primarily by considering our level of practice. It may be concluded that the proposed LRFD reliability based design provisions for the steel highway bridge give more rational design than the current standard code for steel highway bridge.

• Journal of the Korea Concrete Institute
• /
• v.24 no.5
• /
• pp.543-551
• /
• 2012

Road pavements in Korea generally show shorter service life than the predicted one. There are many reasons for this phenomenon including increased traffic load and other attacks from exposure conditions. In order to extend a service life and upgrade the pavement, a new multi-functional composite pavement system is being developed in Korea. This study is to investigate the performances of fiber-reinforced lean concrete for pavement base. This study considered mineral admixtures of fly ash and reject ash. The reject ash is defined as ash that does not meet the specifications for fly ash so that it cannot be used as a supplemental material for cement replacement. Due to the inherent property of lean concrete, compaction during the fabrication of specimens is a key factor. Therefore, this study suggests an appropriate compaction method. From the test results, the compressive strengths of the concrete satisfied the required limit of 5 MPa at 7 days. When a compaction roller was used to mimic actual field conditions, the strength development seemed to be influenced by the compaction energy rather than hydration of cement itself.