• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.6
• /
• pp.233-235
• /
• 2004

Shaped single crystals of Bi : $Y_3Ga_5O_{12}$(Bi = 0.041, 0.047 and 0.061 mol%) were grown by the micro-pulling-down method. Optical absorption spectra show an absorption band at 288 nm ascribed to the lowest energy $6s^2$ \longrightarrow 6s6p transition of $Bi^{3+}$ , while luminescence spectra demonstrate the band at 314 nm ascribed to the reverse radiative transition of the excited $Bi^{3+}$ centres. At room temperature, dominant decay time component was found to be about 440 ns with a minor slower component 580 ns.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.359-361
• /
• 2008

Glasses in the $SnO_2-(50-x)P_2O_5-xB_2O_3$ system were examined as potential replacement for the PbO glass frits with low firing temperature for component materials of a plasma display panel. The glasses were evaluated for their structural and the thermal expansion coefficient, glass transition and glass softening temperatures and Vickers hardness as a function of the $B_2O_3$ content.

• Vacuum Magazine
• /
• v.1 no.2
• /
• pp.24-29
• /
• 2014

Display is a key component in electronic devices. OLED is growing very fast recently due to the explosion of the smart phone market although still LCD is the dominating display technology in the display market at the moment. Also needs for the large area and high resolution TVs and flexible displays are increasing these days. Especially flexible display is expected to be one of the key technologies in mobile devices requiring small device size and large display size. Contrary to the conventional displays, flexible display requires organic materials for the substrate, the active driving element and also for the display element. Plastic film as a substrate, organic semiconductor as an active component of the transistor and organic light emitting materials or electronic paper as a display element are studied actively. In this article, mainly backplane technologies such as substrates and the transistor materials for flexible display will be introduced.

• Smart Structures and Systems
• /
• v.16 no.3
• /
• pp.435-457
• /
• 2015

The most widely known form of multifunctional aircraft structure is smart structures for structural health monitoring (SHM). The aim is to provide automated systems whose purposes are to identify and to characterize possible damage within structures by using a network of actuators and sensors. Unfortunately, environmental and operational variability render many of the proposed damage detection methods difficult to successfully be applied. In this paper, an original robust damage detection approach using output-only vibration data is proposed. It is based on independent component analysis and matrix perturbation analysis, where an analytical threshold is proposed to get rid of statistical assumptions usually performed in damage detection approach. The effectiveness of the proposed SHM method is demonstrated numerically using finite element simulations and experimentally through a conformal load-bearing antenna structure and composite plates instrumented with piezoelectric ceramic materials.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.152-153
• /
• 2006

We demonstrate the methodology of engineering the multi-component ceramic nanopowder with precise morphology by nanoblast calcinations decomposition of preliminary engineered nanoreactors. Multiple explosions of just melted $C_3H_6N_6O_6$ embedded into preliminary engineered nanoreactors break apart the agglomerates due to the highly energetic impacts of the blast waves. Also, the solid-solubility of one component into the other is enhanced by the extremely high local temperature generated during each nano-explosion in surrounding area. This methodology was applied for production of agglomeratefree nano-aggregates of $Gd_{20}Ce_{80}O_{1.95}$ with an average size of 42 nm and $LaSrGaMgO_{3-x}$ nanopowder with an average aggregate size of 83 nm.

• Korean Journal of Metals and Materials
• /
• v.48 no.6
• /
• pp.489-497
• /
• 2010

The remaining life estimation of the level luffing crane component, which has operated for about 20 years is examined carefully, especially on the crane structures. To analyse the crane sructures, the basic load and load combination needed to be considered. We modeled various parts of the level luffing crane to analyse fatigue. Fatigue analysis results showed that the level luffing crane is in the fatigue life so that the crane is in the safe state in fatigue cumulative damage. Analysis results show that the remaining life of a jib upper beam would be about 10 years therefore, the level luffing crane should be stable for fatigue for that period.

• Journal of Hydrogen and New Energy
• /
• v.33 no.6
• /
• pp.643-659
• /
• 2022

For the economic analysis of fuel cells, levelized cost of electricity was calculated according to the type, capacity, and annual production of the fuel cells. The cost of every component was calculated through the system component breakdown. The direct cost of the system included stack cost, component cost, assembly, test, and conditioning cost, and profit markup cost were added. The effect of capacity and annual production was analyzed by fuel cell type. Sensitivity analysis was performed according to stack life, capital cost, project period, and fuel cost. As a result, it was derived how much the economic efficiency of the fuel cell improves as the capacity increases and the annual production increases.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.19
• /
• pp.8101-8105
• /
• 2014

Background: Although mucinous adenocarcinoma has been recognized for a long time, whether it is associated with a poorer prognosis in colorectal cancer patients is still controversial. Many studies put emphasis on mucinous adenocarcinoma containing mucin component ${\geq}50%$. Only a few studies have analyzed cases with a mucin component <50%. Objectives: This study aimed to analyze the prognostic value of different mucin component proportions in patients with stage III rectal cancer. Materials and Methods: Clinical, pathological and follow-up data of 136 patients with the stage III rectal cancer were collected. Every variable was analyzed by univariate analysis, then multivariate analysis and survival analysis were further performed. Results: Univariate analysis showed pathologic T stage, lymphovascular invasion, and histological subtype were statistically significant for DFS. Pathologic T stage was significant for OS. Histological subtype and lymphovascular invasion were independent prognostic factors in multivariate analysis for DFS, and histological subtype was the only independent prognostic factor for OS. Survival curves showed the survival time of mucinous adenocarcinoma (MUC) was shorter than non-MUC (adenocarcinomas with a mucin component <50% and without mucin component). Conclusions: Histological subtype (tumor with different mucin component) was an independent prognostic factor for both DFS and OS. Patients with MUC had a worse prognosis than their non-MUC counterparts with stage III rectal carcinoma.

• Korean Journal of Materials Research
• /
• v.15 no.11
• /
• pp.711-716
• /
• 2005

The effects of change in the component of bonding materials in carbon nanotube cathode (CNT-cathode) on field enhancement and field emission characteristics were investigated. The field enhancement factor$\beta$ was dependent on the electrical conductivity of the bonding materials. The use of frit glass as a bonding material showed a higher field enhancement factor and better field emission characteristics than an Ag paste. The reason for why the frit glass showed better field emission characteristics can be summarized as follows. First, a frit glass improves the real aspect ratio of CNTs compared to an Ag paste. Second, the number of CNTs in CNT-cathodes is considerably reduced because the CNTs were extensively oxidized during $390^{\circ}C$ heat treatment in air atmosphere in the case of Ag paste.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2004.05a
• /
• pp.82-86
• /
• 2004