• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.939-942
• /
• 2007

Vacuum cleaner is a close life product that can remove various dusts from our surroundings. However well vacuum cleaner clean our environments, many people are looking away from it, due to its loud noise. Its noise causes a big trouble in the usual life, for example, catch calls, TV watching and discussing etc. To reduce these inconveniences, noise reduction methods and systematic design of low noise vacuum cleaner are studied in this paper. At first, sound quality investigation is performed to get the noise level and quality that make people TV watching and catch calls available. Based on the European and domestic customer SQ survey result, sound power, peak noise level and target sound spectrum guideline are studied and introduced. As a second, precise product sound spectrums are designed into each part based on the sound quality result. Fan-motor, brush, mainbody, cyclone spectrums are decided to get the final target sound based on the contribution level. Fan-motor is the major noise source of vacuum cleaner. Specially, its peak sound, RPM peak and BPF Peak, cause the people nervous. To reduce these peak sounds, high rotating impeller and diffuser are focused due to its interaction. A lot of experimental and numerical tests, operation points are investigated and optimization of flow path area between diffusers is performed. As a bagless device, cyclones are one of the major noise sources of vacuum cleaner. To reduce its noise, previous research is used and adopted well. Brush is the most difficult part to reduce noise. Its noise sources are all comes from aero-acoustic phenomena. Numerical analysis helps the understanding of flow structure and pattern, and a lot of experimental test are performed to reduce the noise. Gaps between the carpet and brush are optimized and flow paths are re-designed to lower the noise. Reduction is performed with keeping the cleaning efficiency and handling power together and much reduction of noise is acquired. With all above parts, main-body design is studied. To do a systematic design, configuration design developments technique is introduced from airplane design and evolved with each component design. As a first configuration, fan-motor installation position is investigated and 10 configuration ideas are developed and tested. As a second step, reduced size and compressed configuration candidates are tested and evaluated by a lot of major factor. Noise, power, mass production availability, size, flow path are evaluated together. If noise reduction configuration results in other performance degrade, the noise reduction configuration is ineffective. As a third configuration, cyclones are introduced and the size is reduced one more time and fourth, fifth, sixth, seventh configuration are evolved with size and design image with noise and other performance indexes. Finally we can get a overall much noise level reduction configuration. All above investigations are adopted into vacuum cleaner design and final customer satisfaction tests in Europe are performed. 1st grade sound quality and lowest noise level of bagless vacuum cleaner are achieved.

• The Journal of Internal Korean Medicine
• /
• v.30 no.2
• /
• pp.355-364
• /
• 2009

Objectives : Benign prostatic hyperplasia (BPH) is one of the most common diseases among elderly men. Though medicines such as 5${\alpha}$-reductase inhibitor (finasteride) have recently been developed for treating BPH, their adverse effects and low efficacy should not be overlooked. Curcuma longa has a long history of use in traditional medicines of Asian countries. Many reports conclude the component curcumin in Curcuma lonfa, has the potential to treat various diseases including prostate cancer. In this study, we investigated the therapeutic effects and action mechanism of Curcuma longa with a BPH rat model. Methods : Sprague-Dawley rats were used with subcutaneous injection of testosterone after castration, which were histologically similar to human BPH. A total of 30 rats were equally divided into five groups: Group 1 served as control (sham-operated group): Group 2 was the model group: Group 3 and Group 4 animals were administered Curcuma longa at dose levels of 0.5g/kg and 1.0g/kg: Group 5 served as a positive control group and was treated with finasteride at a dose of 1 mg/kg. The drugs were administered orally once a day for 30 days consecutively. After 31 days, the prostates were removed, and analyzed for their prostatic weight and histological examination. Results : The oral Curcuma longa ingestion group showed statistically significant decreases in their prostatic weights compared with the BPH-induced group and the oral finasteride ingestion group (p<0.05). Curcuma longa is also very safe in liver and kidney up to a dose of lg/kg. Injected testosterone histologically led to prostatic hyperplasia in rats, but oral Curcuma longa ingestion decreased this change. Conclusions : These results suggest that Curcuma longa has a definite inhibitory effect on BPH and might be an alternative medicine for treatment and prevention of human BPH.

• Journal of Preventive Medicine and Public Health
• /
• v.21 no.1 s.23
• /
• pp.195-206
• /
• 1988

Two major issues of the blood bank management are quality assurance and inventory control. Recently, in Korea blood donation has gained popularity increasingly to allow considerable improvement of the quality assurance with respect to blood collection, transportation, storage, component preparation skills and hematological tests. Nevertheless the inventory control, the other issue of blood bank management, has been neglected so far. For the supply of blood by donation barely meets the demand, the blood bank policy on the inventory control has been 'the more the better.' The shortage itself by no means unnecessitate inventory control. In fact, in spite of shortage, no small amount of blood is outdated. The efficient blood inventory control makes it possible to economize the blood usage in the practice of state-of-the-art medical care. For the efficient blood inventory control in Korean hospitals, this tudy is to develop formulae forecasting the standard blood inventory level and suggest a set of policies improving the blood inventory control. For this study informations of $A^+$ whole bloods and packed cells inventory control were collected from a University Hospital and the Central Blood Bank of the Korean Red Cross. Using this informations, 1,461 daily blood inventory records were formulated.48 varieties of blood inventory control environment were identified on the basis of selected combinations of 4 inventory control variables-crossmatch, transfusion, inhospital donation and age of bloods from external supply. In order to decide the optimal blood inventory level for each environment, simulation models were designed to calculate the measures of performance of each environment. After the decision of 48 optimal blood inventory levels, stepwise multiple regression analysis was started where the independent variables were 4 inventory control variables and the dependent variable was optimal inventory level of each environment. Finally the standard blood inventory level decision rule was developed using the backward elimination procedure to select the best regression equation. And the effective alternatives of the issuing policy and crossmatch release period were suggested according to the measures of performance under the condition of the standard blood inventory level. The results of this study' were as follows ; 1. The formulae to calculate the standard blood inventory level($S^*$)was $S^*=2.8617X(d)^{0.9342}$ where d is the mean daily crossmatch(demand) for a blood type. 2. The measures of performace - outdate rate, average period of storage, mean age of transfused bloods, and mean daily available inventory level - were improved after maintenance of the standard inventory level in comparison with the present system. 3. Issuing policy of First In-First Out(FIFO) decreased the outdate rate, while Last In-First Out(LIFO) decreased the mean age of transfused bloods. The decrease of the crossmatch release period reduced the outdate rate and the mean age of transfused bloods.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.2
• /
• pp.20-26
• /
• 2007

The microbial community properties of groundwater samples contaminated with landfill leachates were examined using Ecoplate including 31 sole carbon sources. The samples were KSG1-12 (leachate), KSG1-16 (treated leachate), KSG1-07 (contaminated groundwater), KSG1-08 (contaminated groundwater), and KSG1-13 (uncontaminated groundwater). Among the carbon sources used as substrates, 2-hydroxy benzoic acid, D,L-$\alpha$-glycerol phosphate, and D-malic acid were not utilized in any sample, while D-xylose, D-galacturonic acid, L-aspargine, tween 80, and L-serine were utilized in all 5 samples. The rest of substrates showed very different patterns among the samples. Average well color development (AWCD) analysis demonstrated that the potential activity on 31 substrates was in the order of KSG1-16 > KSG1-12 > KSG1-07 > KSG-08 > KSG1-13, which generally agrees with the degree of pollution, except KSG1-16. Principal component analysis (PCA) on similarity between samples showed two groups (KSG1-12, -07 and -08 vs KSG1-16 and -13), coinciding with contaminated and uncontaminated groups. Shannon index showed that the microbial diversities were similar among the samples.

• Journal of Welding and Joining
• /
• v.33 no.5
• /
• pp.26-30
• /
• 2015

Hastelloy X in this study was applied in jet engine F-15 air fighter as shroud to isolate the engine from outer skin. After 15 years operation at elevated temperature the mechanical properties decreased gradually due to the precipitation of continues second phases in the grain boundaries and precipitated inside the grain. The crack happened at the edge of the shroud due to the thermal and mechanical stress from jet engine. Selective TEM analysis found that the grain boundaries consist of $M_{23}C_6$ carbide, $M_6$ Ccarbide and small percentage of sigma(${\sigma}$) phase. Furthermore, it was confirmed the nano size of ${\sigma}$ and miu (${\mu}$) phase inside the grain. In this study, it was investigated the microstructure of the degraded shroud component and HAZ of repair welded shroud. In the HAZ, it was observed the dissolution of the $M_{23}C_6$ carbides and smaller precipitates, the migration of the undissolved larger $M_{23}C_6$ carbide and $M_6$ Ccarbide. It is also observed the liquation due to the simply melt of the segregated precipitates in the grain boundaries. Interestingly, the segregated second phases which simply melt in the grain boundaries more easily happened at higher heat input welding condition. High temperature tensile test was done at $300^{\circ}C$, $700^{\circ}C$ and $900^{\circ}C$. It was obtained that the toughness of welded sample is lower compare to the non-welded sample. The solution heat treatment at $1170^{\circ}C$ for 5 minutes was suggested to obtain a better mechanical properties of the shroud. The high cycle fatigue number of the repair welded shroud shows a much lower compare to the shroud. In addition, the high cycle fatigue number at room temperature after solution heat treatment was almost double compare to the before solution heat treatment under 420-500MPa stress amplitude. However, the high cycle fatigue number of repaired welded sample was shown a much lower compare to the non- welded shroud and solution treated shroud. One of the main reasons to decrease the tensile strength and the high cycle fatigue properties of the repair welded shroud is the formation of the liquid phase in HAZ.

• Journal of Wetlands Research
• /
• v.13 no.3
• /
• pp.593-602
• /
• 2011

The estuarine area of the ecological environment had been seriously damaged by reckless developments during the past half century. The demand for management in estuarine area increased but the efficient management system did not exist. Therefore the aim of this study is to develop a GIS-based integrated DB management system by integrating the ecological environmental data of each division in estuarine area. To achieve this, the system used integrated DB. It is classified into a surveyed monitoring DB in 2010 at estuarine area of Yeongsan and GIS DB to express the spatial data. The integrated DB management system was developed using VisualBasic.NET languages and Arcobjects component for Map-based spatial analysis. Also, to improve the utilization of data, the composition of GUI(Graphical User Interface) through user needs analysis, the expression of monitoring DB, the priority of layer and the function for modular unit were defined. Ultimately the system was developed based on the defined items. GIS-based integrated DB management system can support to understand the ecological environment in estuarine area of Yeongsan river. Also it will provide the users with effective sharing and environmental management of the data. In the future study, comprehensive diagnosis for ecological environment in estuarine area and the reliable prediction need to be made by connecting modeling system.

• Journal of the Mineralogical Society of Korea
• /
• v.12 no.1
• /
• pp.43-53
• /
• 1999

The medical mineral menas a single mineral or a complex of minerals. It is natural material. using the medical action of he major or the minor elements, and traditional medicine stuff which has been used since long time ago. Jusa, cinnabar as the mineral name, is the product of the hydrothermal process. It is used to relax the body and cure high blood pressure, apoplexy and cardiopathy. Jusais the major component of "An shin hwan" and "Woo hwang chung shim hwan" nowadays because it has such an excellent calm effect. In addition, it is used to cure cancers such as esophageal cancer and gastric cancer. Jusa composed of mercuric sulfide causes mercury poisoning such as Minamata disease. It is dealt with mineralogical property and chemical composition medical stuff in Korea and China, as well asmercury poisoning and medical action of Jusa in this study. In order to predct accumulation of the interior of the body of the major and minor elements in Jusa, leaching experiment of Jusa by artificial gastric juice was done as well as thermodynamic reaction modelling to know concentration of each species of body fluid. The minor elements of 24 species such as As, Pb, Cd, a and Fe by leaching reaction of Jusa and artificial gastric juice were leached. We can know the fact that as is less than 1 ppm, Hg is less than 25 ppm and Cd and m are not detected. In addition, mercury exists as species of Hg2+, HgCl+, HgCl2, HgCl3-, HgCl42-, HgClOH, HgS(H2S)2, Hg(HS)3-, HgS22-, HgOH and Hg(OH)2 by reaction modelling between Jusa and artificial gastric juice. The concentration of sulfide complexes is 24.2 ppm and that of others is less than 10 ppm. According to increasing pH, the concentration of HgS(H2S)2, Hg(HS)3+, HgS22- and Hg(OH)2 increases, whereas the concentration of HgCl+, HgCl2, HgCl3- and HgCl42- decreases. Therefore, Jusa is very useful for the development of new medicine because it is possible to predict formation of the body species and species accumulation on mercury known as a toxic element and concentration changes of toxicity and efficiency.city and efficiency.

• Korean Journal of Microbiology
• /
• v.46 no.1
• /
• pp.46-51
• /
• 2010

Coenzyme Q10 (CoQ10) is an essential lipid-soluble component of membrane-bound electron transport chains. CoQ10 is involved in several aspects of cellular metabolism and is increasingly being used in therapeutic applications for several diseases. Despite the recent accomplishments in metabolic engineering of Escherichia coli for CoQ10 production, the production levels are not yet competitive with those by fermentation or isolation. So we tested several microorganisms obtained from the KCTC of Biological Resource Center to find novel sources of strain-development for CoQ10-production. Then we selected two strains, Paracoccus denitrificans (KCTC 2530) and Asaia siamensis (KCTC 12914), and tested to optimize the CoQ10 production conditions. Among the carbon sources tested, CoQ10 production was the highest when fructose was supplied about 4% concentration. Yeast extract produced the highest CoQ10 production about 2% concentration. The highest CoQ10 production was obtained at pH 6.0 for P. denitrificans and pH 8.0 for A. siamensis. And two strains showed the highest CoQ10 production at $30^{\circ}C$, but the highest DCW was obtained at $37^{\circ}C$. In the fed-batch culture, P. denitrificans yielded $14.34{\pm}0.473$ mg and A. siamensis yielded $12.53{\pm}0.231$ mg of final CoQ10 production.

• Management & Information Systems Review
• /
• v.28 no.4
• /
• pp.1-26
• /
• 2009

Among food-service managers, a survey was conducted to grasp the their work-related education conditions and the demand for education program development. This study focuses on food-service managers in web-based training and analyzes the critical factors involved in their learning process in order to clarify the factors that lead to the maximization of training programs. The results of all this study process are as follows. First, the characteristics of web-based education including component of education factor, system factor, deepening learning factor have meaningful effect on commitment of the participants and education performance(except deepening learning factor to education performance). Second, the analysis that the characteristics of individuals including self-efficacy in learning, purpose-directivity factor have meaningful effects on commitment of the participants and education performance(except purpose-directivity factor to education performance). Third, commitment of the participants has meaningful effects on the education performance. Thus, it is advisable for education managers or operators to emphasize in foodservice organizations.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.3
• /
• pp.260-266
• /
• 2008

The aim of present work was to assess the response of soil microbial activity and diversity to green manures under the organically managed grape-greenhouse in early spring. Hairy vetch, milk vetch, and red clover were seeded in fall, and enzymatic activities by dehydrogenase and fluorescein diacetate (FDA) hydrolase, and microbial diversities by Biolog $EcoPlate^{TM}$ and phospholipid fatty acid (PLFA) were characterized for soils sampled in early spring. Dehydrogenase activity and FDA hydrolytic activity did not differentiate the green manures but the average well color development of Biolog EcoPlate was higher in soils covered with red clover than control soil. Soil microbial functional diversity by Biolog EcoPlate differentiated the soils covered with hairy vetch and milk vetch, and Shannon diversity index by Biolog EcoPlate was higher in soils covered with hairy vetch than control soil. Principal component analysis of PLFA differentiated the soils covered with milk vetch from control soil.